Hyster H3.0FT Specifications
The Hyster H3.0FT has a capacity of 3,000 kg, a lift height of 3,055 mm and a weight of 4,612 kg, per the specification table below.
3.0 tonne diesel counterbalance forklift from the Hyster Fortens FT range. Figures are for the base Fortens configuration with Yanmar 2.6 L engine, 3,055 mm two-stage mast and 1,000 mm forks, as published in Hyster's 2018 technical guide.
Key specifications
- Capacity
- 3,000 kg (6,614 lb)
- Lift Height
- 3,055 mm (10.0 ft)
- Fuel
- Diesel
- Power
- 33.9 kW (45.5 hp)
- Width
- 1,186 mm (46.7 in)
- Turning Radius
- 2,277 mm (7.5 ft)
- Weight
- 4,612 kg (10,168 lb)
How the H3.0FT compares
At 3,000 kg the Hyster H3.0FT has the 9th highest rated capacity of the 15 diesel forklifts with a published figure in this database (range 2,000 kg to 5,500 kg). The Hyster H3.0FT in the Fortens FT range has a 3,055 mm lift height, the 8th highest of 15 in diesel forklifts, against a category median of 3,055 mm.
The Hyster H3.0FT weighs 1,537 kg per tonne of rated capacity, in line with the category median of 1,561 kg.
The Hyster H3.0FT is one of 10 models listed in the Fortens FT range, which covers 2,000 kg to 5,500 kg. One rating down is the Hyster H2.5FT at 2,500 kg (-710 kg operating weight); one rating up is the Hyster H3.5FT at 3,500 kg (+187 kg operating weight).
The Hyster H3.0FT is listed with a Yanmar 4TNE92 (2.6 L) engine rated at 33.9 kW, a 2-stage limited free lift mast, Solid Pneumatic, front 28 x 9-15, rear 6.50 x 10 tyres, a Electronic Powershift, 1-speed transmission, a seated operator position.
Hyster H3.0FT full specifications
Capacity & Load
| Rated Lift Capacity ? | 3,000 kg (6,614 lb) |
|---|---|
| Load Centre ? | 500 mm (19.7 in) |
| Maximum Lift Height ? | 3,055 mm (10.0 ft) |
| Capacity at Maximum Height ? | Not specified |
| Free Lift ? | 140 mm (5.5 in) |
Mast & Forks
| Mast Type | 2-stage limited free lift |
|---|---|
| Mast Height Lowered ? | 2,195 mm (7.2 ft) |
| Mast Height Extended | 3,805 mm (12.5 ft) |
| Mast Tilt Forward | 6deg |
| Mast Tilt Backward | 5deg |
| Fork Length | 1,000 mm (39.4 in) |
| Fork Width | 120 mm (4.7 in) |
| Fork Thickness | 50 mm (2.0 in) |
| Fork Carriage Class ? | III A |
Engine & Powertrain
| Fuel Type | Diesel |
|---|---|
| Power Source | Internal Combustion |
| Engine Manufacturer | Yanmar |
| Engine Model | 4TNE92 (2.6 L) |
| Engine / Motor Power ? | 33.9 kW (45.5 hp) |
| Engine Displacement | 2,659 cc |
| Cylinders | 4 |
| Drive Motor Power | Not specified |
| Lift Motor Power | Not specified |
| Transmission | Electronic Powershift, 1-speed |
Battery & Fuel
| Battery Voltage | Not specified |
|---|---|
| Battery Capacity | Not specified |
| Battery Energy ? | Not specified |
| Battery Type | Not specified |
| Minimum Battery Weight ? | Not specified |
| Fuel Tank Capacity | 52.8 L (13.9 gal) |
| LPG Cylinder Size | Not specified |
Dimensions
| Overall Length (with forks) | 3,633 mm (11.9 ft) |
|---|---|
| Length to Fork Face | 2,633 mm (8.6 ft) |
| Overall Width ? | 1,186 mm (46.7 in) |
| Overall Height | Not specified |
| Height to Overhead Guard | 2,185 mm (7.2 ft) |
| Wheelbase | 1,623 mm (63.9 in) |
| Ground Clearance | 185 mm (7.3 in) |
| Outside Turning Radius ? | 2,277 mm (7.5 ft) |
| Right-Angle Stacking Aisle (incl. load) ? | 3,960 mm (13.0 ft) |
| Right-Angle Stacking Aisle (excl. load) ? | Not specified |
| Working Aisle (VDI 4.34), 1000x1200 Crossways ? | 3,960 mm (13.0 ft) |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise ? | 4,160 mm (13.6 ft) |
| Load Distance (x) ? | 483 mm (19.0 in) |
| Internal Turning Radius (b13) ? | 618 mm (24.3 in) |
Weights
| Operating Weight ? | 4,612 kg (10,168 lb) |
|---|---|
| Front Axle Load (laden) | 6,640 kg (14,639 lb) |
| Rear Axle Load (laden) | 972 kg (2,143 lb) |
Performance
| Travel Speed (laden) | 18.2 km/h (11.3 mph) |
|---|---|
| Travel Speed (unladen) | 19.1 km/h (11.9 mph) |
| Lift Speed (laden) | 470 mm/s (92.5 ft/min) |
| Lift Speed (unladen) | 620 mm/s (122.0 ft/min) |
| Lowering Speed (laden) | 530 mm/s (104.3 ft/min) |
| Gradeability (laden) | 15.0% |
| Drawbar Pull (laden) | 16,354 N (3,677 lbf) |
Tyres, Brakes & Chassis
| Tyre Type | Solid Pneumatic |
|---|---|
| Front Tyre Size | 28 x 9-15 |
| Rear Tyre Size | 6.50 x 10 |
| Wheels (front / rear) | 2x / 2 |
| Service Brake | Hydraulic, drum |
| Steering | Not specified |
| Operator Position | Seated |
General
| Noise Level at Operator Ear | 79 dB(A) |
|---|---|
| Ingress Protection Rating | Not specified |
| Warranty | 24 months / 4,000 hours (manufacturer standard) |
Not published for this model
- Battery Voltage
- Battery Type
- Capacity at Maximum Height
- Drive Motor Power
- Lift Motor Power
- Battery Capacity
Compare the H3.0FT
Alternatives from other manufacturers
Frequently asked questions
What is the lift capacity of the Hyster H3.0FT?
The Hyster H3.0FT has a rated lift capacity of 3,000 kg (6,614 lb) at a 500 mm (19.7 in) load centre, ranking 9th of 15 diesel forklifts with a published capacity.
How high does the Hyster H3.0FT lift?
The Hyster H3.0FT lifts to a maximum fork height of 3,055 mm (10.0 ft) with its standard mast.
What fuel does the Hyster H3.0FT use?
The Hyster H3.0FT is a diesel forklift, with a rated output of 33.9 kW (45.5 hp).
How much does the Hyster H3.0FT weigh?
The Hyster H3.0FT has an operating weight of 4,612 kg (10,168 lb).
What are the dimensions of the Hyster H3.0FT?
The Hyster H3.0FT measures overall length 3,633 mm (11.9 ft), overall width 1,186 mm (46.7 in), lowered mast height 2,195 mm (7.2 ft).
How much space does the Hyster H3.0FT need to turn?
The Hyster H3.0FT has an outside turning radius of 2,277 mm (7.5 ft) and a right-angle stacking aisle of 3,960 mm (13.0 ft).
What engine does the Hyster H3.0FT list?
The Hyster H3.0FT lists a Yanmar 4TNE92 (2.6 L) engine rated at 33.9 kW (45.5 hp).
What mast does the Hyster H3.0FT list?
The Hyster H3.0FT is listed with a 2-stage limited free lift mast.
What tyres does the Hyster H3.0FT list?
The Hyster H3.0FT is listed with Solid Pneumatic, front 28 x 9-15, rear 6.50 x 10 tyres.
Sources
Source recorded for the Hyster H3.0FT.