Hyster H3.5FT Specifications
The Hyster H3.5FT has a capacity of 3,500 kg, a lift height of 3,055 mm and a weight of 4,799 kg, per the specification table below.
3.5 tonne diesel counterbalance forklift from the Hyster Fortens FT range. Figures are for the base Fortens configuration with Yanmar 3.3 L engine, 3,055 mm two-stage mast and 1,000 mm forks, as published in Hyster's 2018 technical guide.
Key specifications
- Capacity
- 3,500 kg (7,716 lb)
- Lift Height
- 3,055 mm (10.0 ft)
- Fuel
- Diesel
- Power
- 43.0 kW (57.7 hp)
- Width
- 1,186 mm (46.7 in)
- Turning Radius
- 2,380 mm (7.8 ft)
- Weight
- 4,799 kg (10,580 lb)
How the H3.5FT compares
At 3,500 kg the Hyster H3.5FT has the 7th highest rated capacity of the 15 diesel forklifts with a published figure in this database (range 2,000 kg to 5,500 kg). The Hyster H3.5FT in the Fortens FT range has a 3,055 mm lift height, the 8th highest of 15 in diesel forklifts, against a category median of 3,055 mm.
The Hyster H3.5FT weighs 1,371 kg per tonne of rated capacity, 12% below the category median of 1,561 kg.
The Hyster H3.5FT is one of 10 models listed in the Fortens FT range, which covers 2,000 kg to 5,500 kg. One rating down is the Hyster H3.0FT at 3,000 kg (-187 kg operating weight); one rating up is the Hyster H4.0FT5 at 4,000 kg (+1,465 kg operating weight).
The Hyster H3.5FT is listed with a Yanmar 4TNE98 (3.3 L) engine rated at 43.0 kW, a 2-stage limited free lift mast, Solid Pneumatic, front 28 x 9-15, rear 6.50 x 10 tyres, a Electronic Powershift, 1-speed transmission, a seated operator position.
Hyster H3.5FT full specifications
Capacity & Load
| Rated Lift Capacity ? | 3,500 kg (7,716 lb) |
|---|---|
| Load Centre ? | 500 mm (19.7 in) |
| Maximum Lift Height ? | 3,055 mm (10.0 ft) |
| Capacity at Maximum Height ? | Not specified |
| Free Lift ? | 140 mm (5.5 in) |
Mast & Forks
| Mast Type | 2-stage limited free lift |
|---|---|
| Mast Height Lowered ? | 2,195 mm (7.2 ft) |
| Mast Height Extended | 3,805 mm (12.5 ft) |
| Mast Tilt Forward | 6deg |
| Mast Tilt Backward | 5deg |
| Fork Length | 1,000 mm (39.4 in) |
| Fork Width | 120 mm (4.7 in) |
| Fork Thickness | 50 mm (2.0 in) |
| Fork Carriage Class ? | III A |
Engine & Powertrain
| Fuel Type | Diesel |
|---|---|
| Power Source | Internal Combustion |
| Engine Manufacturer | Yanmar |
| Engine Model | 4TNE98 (3.3 L) |
| Engine / Motor Power ? | 43.0 kW (57.7 hp) |
| Engine Displacement | 3,319 cc |
| Cylinders | 4 |
| Drive Motor Power | Not specified |
| Lift Motor Power | Not specified |
| Transmission | Electronic Powershift, 1-speed |
Battery & Fuel
| Battery Voltage | Not specified |
|---|---|
| Battery Capacity | Not specified |
| Battery Energy ? | Not specified |
| Battery Type | Not specified |
| Minimum Battery Weight ? | Not specified |
| Fuel Tank Capacity | 52.8 L (13.9 gal) |
| LPG Cylinder Size | Not specified |
Dimensions
| Overall Length (with forks) | 3,734 mm (12.3 ft) |
|---|---|
| Length to Fork Face | 2,734 mm (9.0 ft) |
| Overall Width ? | 1,186 mm (46.7 in) |
| Overall Height | Not specified |
| Height to Overhead Guard | 2,185 mm (7.2 ft) |
| Wheelbase | 1,700 mm (66.9 in) |
| Ground Clearance | 185 mm (7.3 in) |
| Outside Turning Radius ? | 2,380 mm (7.8 ft) |
| Right-Angle Stacking Aisle (incl. load) ? | 4,063 mm (13.3 ft) |
| Right-Angle Stacking Aisle (excl. load) ? | Not specified |
| Working Aisle (VDI 4.34), 1000x1200 Crossways ? | 4,063 mm (13.3 ft) |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise ? | 4,263 mm (14.0 ft) |
| Load Distance (x) ? | 483 mm (19.0 in) |
| Internal Turning Radius (b13) ? | 647 mm (25.5 in) |
Weights
| Operating Weight ? | 4,799 kg (10,580 lb) |
|---|---|
| Front Axle Load (laden) | 7,319 kg (16,136 lb) |
| Rear Axle Load (laden) | 980 kg (2,161 lb) |
Performance
| Travel Speed (laden) | 20.0 km/h (12.4 mph) |
|---|---|
| Travel Speed (unladen) | 21.1 km/h (13.1 mph) |
| Lift Speed (laden) | 600 mm/s (118.1 ft/min) |
| Lift Speed (unladen) | 600 mm/s (118.1 ft/min) |
| Lowering Speed (laden) | 530 mm/s (104.3 ft/min) |
| Gradeability (laden) | 16.5% |
| Drawbar Pull (laden) | 17,450 N (3,923 lbf) |
Tyres, Brakes & Chassis
| Tyre Type | Solid Pneumatic |
|---|---|
| Front Tyre Size | 28 x 9-15 |
| Rear Tyre Size | 6.50 x 10 |
| Wheels (front / rear) | 2x / 2 |
| Service Brake | Hydraulic, drum |
| Steering | Not specified |
| Operator Position | Seated |
General
| Noise Level at Operator Ear | 79 dB(A) |
|---|---|
| Ingress Protection Rating | Not specified |
| Warranty | 24 months / 4,000 hours (manufacturer standard) |
Not published for this model
- Battery Voltage
- Battery Type
- Capacity at Maximum Height
- Drive Motor Power
- Lift Motor Power
- Battery Capacity
Compare the H3.5FT
Alternatives from other manufacturers
Frequently asked questions
What is the lift capacity of the Hyster H3.5FT?
The Hyster H3.5FT has a rated lift capacity of 3,500 kg (7,716 lb) at a 500 mm (19.7 in) load centre, ranking 7th of 15 diesel forklifts with a published capacity.
How high does the Hyster H3.5FT lift?
The Hyster H3.5FT lifts to a maximum fork height of 3,055 mm (10.0 ft) with its standard mast.
What fuel does the Hyster H3.5FT use?
The Hyster H3.5FT is a diesel forklift, with a rated output of 43.0 kW (57.7 hp).
How much does the Hyster H3.5FT weigh?
The Hyster H3.5FT has an operating weight of 4,799 kg (10,580 lb).
What are the dimensions of the Hyster H3.5FT?
The Hyster H3.5FT measures overall length 3,734 mm (12.3 ft), overall width 1,186 mm (46.7 in), lowered mast height 2,195 mm (7.2 ft).
How much space does the Hyster H3.5FT need to turn?
The Hyster H3.5FT has an outside turning radius of 2,380 mm (7.8 ft) and a right-angle stacking aisle of 4,063 mm (13.3 ft).
What engine does the Hyster H3.5FT list?
The Hyster H3.5FT lists a Yanmar 4TNE98 (3.3 L) engine rated at 43.0 kW (57.7 hp).
What mast does the Hyster H3.5FT list?
The Hyster H3.5FT is listed with a 2-stage limited free lift mast.
What tyres does the Hyster H3.5FT list?
The Hyster H3.5FT is listed with Solid Pneumatic, front 28 x 9-15, rear 6.50 x 10 tyres.
Sources
Source recorded for the Hyster H3.5FT.