Hyster Diesel Forklifts

Hyster H4.0FT5

4.0 tonne diesel counterbalance forklift (rated at a 500 mm load centre) from the Hyster Fortens FT range, Kubota 3.6 L engine. Figures are for the base powershift configuration with 3,000 mm two-stage mast and 1,000 mm forks, from Hyster's 2019 technical guide.

82% Checked against source

Compare H4.0FT5 Build a comparison

Key specifications

Capacity
4,000 kg (8,818 lb)
Lift Height
3,000 mm (9.8 ft)
Fuel
Diesel
Power
57.0 kW (76.4 hp)
Width
1,402 mm (55.2 in)
Turning Radius
2,570 mm (8.4 ft)
Weight
6,264 kg (13,810 lb)

Hyster H4.0FT5 full specifications

Capacity & Load

Rated Lift Capacity ? 4,000 kg (8,818 lb)
Load Centre ? 500 mm (19.7 in)
Maximum Lift Height ? 3,000 mm (9.8 ft)
Capacity at Maximum Height ? Not specified
Free Lift ? 100 mm (3.9 in)

Mast & Forks

Mast Type 2-stage limited free lift
Mast Height Lowered ? 2,171 mm (7.1 ft)
Mast Height Extended 3,815 mm (12.5 ft)
Mast Tilt Forward 6deg
Mast Tilt Backward 10deg
Fork Length 1,000 mm (39.4 in)
Fork Width 120 mm (4.7 in)
Fork Thickness 50 mm (2.0 in)
Fork Carriage Class ? III A

Engine & Powertrain

Fuel Type Diesel
Power Source Internal Combustion
Engine Manufacturer Kubota
Engine Model V3600 IDI-T (3.6 L)
Engine / Motor Power ? 57.0 kW (76.4 hp)
Engine Displacement 3,620 cc
Cylinders 4
Drive Motor Power Not specified
Lift Motor Power Not specified
Transmission Electronic Powershift, 1-speed

Battery & Fuel

Battery Voltage Not specified
Battery Capacity Not specified
Battery Energy ? Not specified
Battery Type Not specified
Minimum Battery Weight ? Not specified
Fuel Tank Capacity 79.0 L (20.9 gal)
LPG Cylinder Size Not specified

Dimensions

Overall Length (with forks) 3,946 mm (12.9 ft)
Length to Fork Face 2,946 mm (9.7 ft)
Overall Width ? 1,402 mm (55.2 in)
Overall Height Not specified
Height to Overhead Guard 2,258 mm (7.4 ft)
Wheelbase 1,830 mm (72.0 in)
Ground Clearance 194 mm (7.6 in)
Outside Turning Radius ? 2,570 mm (8.4 ft)
Right-Angle Stacking Aisle (incl. load) ? 4,493 mm (14.7 ft)
Right-Angle Stacking Aisle (excl. load) ? Not specified

Weights

Operating Weight ? 6,264 kg (13,810 lb)
Front Axle Load (laden) 8,969 kg (19,773 lb)
Rear Axle Load (laden) 1,295 kg (2,855 lb)

Performance

Travel Speed (laden) 17.9 km/h (11.1 mph)
Travel Speed (unladen) 18.8 km/h (11.7 mph)
Lift Speed (laden) 530 mm/s (104.3 ft/min)
Lift Speed (unladen) 600 mm/s (118.1 ft/min)
Lowering Speed (laden) 550 mm/s (108.3 ft/min)
Gradeability (laden) 27.3%
Drawbar Pull (laden) 25,973 N (5,839 lbf)

Tyres, Brakes & Chassis

Tyre Type Solid Pneumatic
Front Tyre Size 250 x 15
Rear Tyre Size 7.00 x 12
Wheels (front / rear) 2x / 2
Service Brake Hydraulic, oil-immersed
Steering Not specified
Operator Position Seated

General

Noise Level at Operator Ear 81 dB(A)
Ingress Protection Rating Not specified
Warranty Not specified

Not published for this model

We only publish figures we can source. These specifications are not in the documents we hold for this machine:

  • Battery Voltage
  • Battery Type
  • Capacity at Maximum Height
  • Drive Motor Power
  • Lift Motor Power
  • Battery Capacity

Ask the dealer for the full specification sheet if one of these matters to your decision.

Alternatives from other manufacturers

Machines in the same capacity class, from a different brand.

Linde

X30

  • Capacity3,000 kg
  • Lift height3,095 mm
  • FuelElectric

84% Compare

Frequently asked questions

What is the lift capacity of the Hyster H4.0FT5?

The Hyster H4.0FT5 has a rated lift capacity of 4,000 kg (8,818 lb) at a 500 mm (19.7 in) load centre.

How high does the Hyster H4.0FT5 lift?

The Hyster H4.0FT5 lifts to a maximum fork height of 3,000 mm (9.8 ft) with its standard mast.

What fuel does the Hyster H4.0FT5 use?

The Hyster H4.0FT5 is a diesel forklift. Rated output is 57.0 kW (76.4 hp).

How much does the Hyster H4.0FT5 weigh?

The Hyster H4.0FT5 has an operating weight of 6,264 kg (13,810 lb). Check this against your floor loading limits and any trailer or lift you plan to move it on.

What are the dimensions of the Hyster H4.0FT5?

The Hyster H4.0FT5 measures overall length 3,946 mm (12.9 ft), overall width 1,402 mm (55.2 in), lowered mast height 2,171 mm (7.1 ft).

How much space does the Hyster H4.0FT5 need to turn?

The Hyster H4.0FT5 has an outside turning radius of 2,570 mm (8.4 ft) and a right-angle stacking aisle of 4,493 mm (14.7 ft).

Work out what it costs to run

Sources

Where the specifications on this page came from.