Hyster H4.0FT5 vs Linde X30
Key differences
- Engine / Motor Power. The Hyster H4.0FT5 offers 32.2 kW more engine / motor power than the Linde X30.
- Rated Lift Capacity. The Hyster H4.0FT5 offers 1,000 kg more rated lift capacity than the Linde X30. Hyster H4.0FT5: 4,000 kg (at 500 mm load centre) · Linde X30: 3,000 kg (at 500 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
- Overall Width. The Linde X30 offers 146 mm less overall width than the Hyster H4.0FT5.
- Outside Turning Radius. The Linde X30 offers 176 mm less outside turning radius than the Hyster H4.0FT5.
- Drawbar Pull (laden). The Hyster H4.0FT5 offers 18,373 N more drawbar pull (laden) than the Linde X30.
- Operating Weight. These differ: Hyster H4.0FT5 6,264 kg, Linde X30 5,121 kg.
On rated lift capacity, Hyster H4.0FT5 leads with the higher figure at 4,000 kg versus 3,000 kg for Linde X30. The measured gap is 1,000 kg, or 33.3% relative to the latter published value. Hyster H4.0FT5: 4,000 kg (at 500 mm load centre) · Linde X30: 3,000 kg (at 500 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
Linde X30 leads with the higher figure on maximum lift height: its published 3,095 mm compares with 3,000 mm for Hyster H4.0FT5. That is an absolute difference of 95 mm (3.2% against the latter figure).
The travel speed (laden) figures separate Linde X30 and Hyster H4.0FT5. Linde X30 leads with the higher figure with 22.0 km/h; Hyster H4.0FT5 records 17.9 km/h, a gap of 4.1 km/h or 22.9% of that second value.
On lift speed (laden), Linde X30 leads with the higher figure at 570 mm/s versus 530 mm/s for Hyster H4.0FT5. The measured gap is 40 mm/s, or 7.5% relative to the latter published value.
Hyster H4.0FT5 has the higher published figure on operating weight: its published 6,264 kg compares with 5,121 kg for Linde X30. That is an absolute difference of 1,143 kg (22.3% against the latter figure).
The outside turning radius figures separate Linde X30 and Hyster H4.0FT5. Linde X30 leads with the lower figure with 2,394 mm; Hyster H4.0FT5 records 2,570 mm, a gap of 176 mm or 6.8% of that second value.
Highlighted values lead on that specification. An arrow indicates whether a higher or lower figure is preferred.
| Specification | Hyster H4.0FT5 | Linde X30 |
|---|---|---|
| Capacity & Load | ||
| Rated Lift Capacity | 4,000 kg (8,818 lb) (at 500 mm load centre) | 3,000 kg (6,614 lb) (at 500 mm load centre) |
| Load Centre | 500 mm (19.7 in) | 500 mm (19.7 in) |
| Maximum Lift Height | 3,000 mm (9.8 ft) | 3,095 mm (10.2 ft) |
| Free Lift | 100 mm (3.9 in) | 150 mm (5.9 in) |
| Mast & Forks | ||
| Mast Type | 2-stage limited free lift | Standard mast |
| Mast Height Lowered | 2,171 mm (7.1 ft) | 2,218 mm (7.3 ft) |
| Mast Height Extended | 3,815 mm (12.5 ft) | 3,850 mm (12.6 ft) |
| Mast Tilt Forward | 6deg | 5deg |
| Mast Tilt Backward | 10deg | 8deg |
| Fork Length | 1,000 mm (39.4 in) | 1,000 mm (39.4 in) |
| Fork Width | 120 mm (4.7 in) | 100 mm (3.9 in) |
| Fork Thickness | 50 mm (2.0 in) | 45 mm (1.8 in) |
| Fork Carriage Class | III A | 3A |
| Engine & Powertrain | ||
| Fuel Type | Diesel | Electric |
| Power Source | Internal Combustion | Battery Electric |
| Engine Manufacturer | Kubota | Not specified |
| Engine Model | V3600 IDI-T (3.6 L) | Not specified |
| Engine / Motor Power | 57.0 kW (76.4 hp) | 24.8 kW (33.3 hp) |
| Engine Displacement | 3,620 cc | Not specified |
| Cylinders | 4 | Not specified |
| Drive Motor Power | Not specified | 12.4 kW (16.6 hp) |
| Lift Motor Power | Not specified | 20.0 kW (26.8 hp) |
| Transmission | Electronic Powershift, 1-speed | Synchronous reluctance motors, stepless digital control |
| Battery & Fuel | ||
| Battery Voltage | Not specified | 90 V |
| Battery Capacity | Not specified | 670 Ah |
| Battery Energy | Not specified | 60.3 kWh |
| Battery Type | Not specified | Lithium-ion |
| Fuel Tank Capacity | 79.0 L (20.9 gal) | Not specified |
| Dimensions | ||
| Overall Length (with forks) | 3,946 mm (12.9 ft) | 3,704 mm (12.2 ft) |
| Length to Fork Face | 2,946 mm (9.7 ft) | 2,704 mm (8.9 ft) |
| Overall Width | 1,402 mm (55.2 in) | 1,256 mm (49.4 in) |
| Height to Overhead Guard | 2,258 mm (7.4 ft) | 2,225 mm (7.3 ft) |
| Wheelbase | 1,830 mm (72.0 in) | 1,875 mm (73.8 in) |
| Ground Clearance | 194 mm (7.6 in) | 178 mm (7.0 in) |
| Outside Turning Radius | 2,570 mm (8.4 ft) | 2,394 mm (7.9 ft) |
| Right-Angle Stacking Aisle (incl. load) | 4,493 mm (14.7 ft) | 4,043 mm (13.3 ft) |
| Working Aisle (VDI 4.34), 1000x1200 Crossways | 4,493 mm (14.7 ft) | 4,043 mm (13.3 ft) |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise | Not specified | 4,243 mm (13.9 ft) |
| Load Distance (x) | 523 mm (20.6 in) | 448 mm (17.6 in) |
| Internal Turning Radius (b13) | 751 mm (29.6 in) | 668 mm (26.3 in) |
| Weights | ||
| Operating Weight | 6,264 kg (13,810 lb) | 5,121 kg (11,290 lb) |
| Front Axle Load (laden) | 8,969 kg (19,773 lb) | 7,104 kg (15,662 lb) |
| Rear Axle Load (laden) | 1,295 kg (2,855 lb) | 1,017 kg (2,242 lb) |
| Performance | ||
| Travel Speed (laden) | 17.9 km/h (11.1 mph) | 22.0 km/h (13.7 mph) |
| Travel Speed (unladen) | 18.8 km/h (11.7 mph) | 22.0 km/h (13.7 mph) |
| Lift Speed (laden) | 530 mm/s (104.3 ft/min) | 570 mm/s (112.2 ft/min) |
| Lift Speed (unladen) | 600 mm/s (118.1 ft/min) | 580 mm/s (114.2 ft/min) |
| Lowering Speed (laden) | 550 mm/s (108.3 ft/min) | 580 mm/s (114.2 ft/min) |
| Gradeability (laden) | 27.3% | 18.3% |
| Drawbar Pull (laden) | 25,973 N (5,839 lbf) | 7,600 N (1,709 lbf) |
| Tyres, Brakes & Chassis | ||
| Tyre Type | Solid Pneumatic | Solid Pneumatic |
| Front Tyre Size | 250 x 15 | 250/75-12 (27 x 10-12) |
| Rear Tyre Size | 7.00 x 12 | 225/75-10 (23 x 9-10) |
| Wheels (front / rear) | 2x / 2 | 2x / 2 |
| Service Brake | Hydraulic, oil-immersed | Hydraulic / mechanical |
| Operator Position | Seated | Seated |
| General | ||
| Noise Level at Operator Ear | 81 dB(A) | Not specified |
What the numbers say
This is a cross-brand comparison: Hyster H4.0FT5 (Fortens FT), Linde X30 (X Series 1252).
Hyster H4.0FT5: 4,000 kg (at 500 mm load centre); Linde X30: 3,000 kg (at 500 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
The Hyster H4.0FT5 has the highest published rating at 4,000 kg, 33% more than the Linde X30 at 3,000 kg.
For racking, the Linde X30 reaches 3,095 mm while the Hyster H4.0FT5 tops out at 3,000 mm, a difference of 95 mm.
Per tonne of rated capacity the Hyster H4.0FT5 weighs 1,566 kg and the Linde X30 weighs 1,707 kg.
Frequently asked questions
How do the published lift capacity ratings of the Hyster H4.0FT5 and Linde X30 compare?
Hyster H4.0FT5: 4,000 kg (at 500 mm load centre). Linde X30: 3,000 kg (at 500 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
How do the lift heights of the Hyster H4.0FT5 and Linde X30 compare?
Hyster H4.0FT5: 3,000 mm. Linde X30: 3,095 mm.
How do the turning radii of the Hyster H4.0FT5 and Linde X30 compare?
Hyster H4.0FT5: 2,570 mm. Linde X30: 2,394 mm.
How do the operating weights of the Hyster H4.0FT5 and Linde X30 compare?
Hyster H4.0FT5: 6,264 kg. Linde X30: 5,121 kg.
What is the main difference between the Hyster H4.0FT5 and Linde X30?
The Hyster H4.0FT5 offers 32.2 kW more engine / motor power than the Linde X30. The Hyster H4.0FT5 offers 1,000 kg more rated lift capacity than the Linde X30. Hyster H4.0FT5: 4,000 kg (at 500 mm load centre) · Linde X30: 3,000 kg (at 500 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck. The Linde X30 offers 146 mm less overall width than the Hyster H4.0FT5.
Do the Hyster H4.0FT5 and Linde X30 use the same fuel type?
No. Hyster H4.0FT5: Diesel. Linde X30: Electric.