Hyster Diesel Forklifts

Hyster H3.5A

3.5 tonne diesel counterbalance forklift from the Hyster A series with Yanmar 2.1 L engine. Figures are for the standard powershift configuration with two-stage mast and 1,000 mm forks, from Hyster's 2022 technical guide.

83% Checked against source

Compare H3.5A Build a comparison

Key specifications

Capacity
3,500 kg (7,716 lb)
Lift Height
3,880 mm (12.7 ft)
Fuel
Diesel
Power
44.0 kW (59.0 hp)
Width
1,186 mm (46.7 in)
Turning Radius
2,449 mm (8.0 ft)
Weight
4,910 kg (10,825 lb)

Hyster H3.5A full specifications

Capacity & Load

Rated Lift Capacity ? 3,500 kg (7,716 lb)
Load Centre ? 500 mm (19.7 in)
Maximum Lift Height ? 3,880 mm (12.7 ft)
Capacity at Maximum Height ? Not specified
Free Lift ? 50 mm (2.0 in)

Mast & Forks

Mast Type 2-stage limited free lift
Mast Height Lowered ? 2,692 mm (8.8 ft)
Mast Height Extended 4,552 mm (14.9 ft)
Mast Tilt Forward 6deg
Mast Tilt Backward 6deg
Fork Length 1,000 mm (39.4 in)
Fork Width 120 mm (4.7 in)
Fork Thickness 50 mm (2.0 in)
Fork Carriage Class ? III A

Engine & Powertrain

Fuel Type Diesel
Power Source Internal Combustion
Engine Manufacturer Yanmar
Engine Model 4TNV86CHT (2.1 L)
Engine / Motor Power ? 44.0 kW (59.0 hp)
Engine Displacement 2,091 cc
Cylinders 4
Drive Motor Power Not specified
Lift Motor Power Not specified
Transmission Electronic Powershift, 1-speed

Battery & Fuel

Battery Voltage Not specified
Battery Capacity Not specified
Battery Energy ? Not specified
Battery Type Not specified
Minimum Battery Weight ? Not specified
Fuel Tank Capacity 39.9 L (10.5 gal)
LPG Cylinder Size Not specified

Dimensions

Overall Length (with forks) 3,813 mm (12.5 ft)
Length to Fork Face 2,781 mm (9.1 ft)
Overall Width ? 1,186 mm (46.7 in)
Overall Height Not specified
Height to Overhead Guard 2,182 mm (7.2 ft)
Wheelbase 1,700 mm (66.9 in)
Ground Clearance 182 mm (7.2 in)
Outside Turning Radius ? 2,449 mm (8.0 ft)
Right-Angle Stacking Aisle (incl. load) ? 4,144 mm (13.6 ft)
Right-Angle Stacking Aisle (excl. load) ? Not specified

Weights

Operating Weight ? 4,910 kg (10,825 lb)
Front Axle Load (laden) 7,230 kg (15,939 lb)
Rear Axle Load (laden) 1,180 kg (2,601 lb)

Performance

Travel Speed (laden) 18.4 km/h (11.4 mph)
Travel Speed (unladen) 18.6 km/h (11.6 mph)
Lift Speed (laden) 560 mm/s (110.2 ft/min)
Lift Speed (unladen) 610 mm/s (120.1 ft/min)
Lowering Speed (laden) 580 mm/s (114.2 ft/min)
Gradeability (laden) 24.0%
Drawbar Pull (laden) 19,021 N (4,276 lbf)

Tyres, Brakes & Chassis

Tyre Type Solid Pneumatic
Front Tyre Size 28 x 9-15
Rear Tyre Size 6.5 x 10
Wheels (front / rear) 2x / 2
Service Brake Hydraulic, drum
Steering Not specified
Operator Position Seated

General

Noise Level at Operator Ear 79 dB(A)
Ingress Protection Rating Not specified
Warranty 24 months / 4,000 hours (manufacturer standard)

Not published for this model

We only publish figures we can source. These specifications are not in the documents we hold for this machine:

  • Battery Voltage
  • Battery Type
  • Capacity at Maximum Height
  • Drive Motor Power
  • Lift Motor Power
  • Battery Capacity

Ask the dealer for the full specification sheet if one of these matters to your decision.

Alternatives from other manufacturers

Machines in the same capacity class, from a different brand.

Linde

X30

  • Capacity3,000 kg
  • Lift height3,095 mm
  • FuelElectric

84% Compare

Frequently asked questions

What is the lift capacity of the Hyster H3.5A?

The Hyster H3.5A has a rated lift capacity of 3,500 kg (7,716 lb) at a 500 mm (19.7 in) load centre.

How high does the Hyster H3.5A lift?

The Hyster H3.5A lifts to a maximum fork height of 3,880 mm (12.7 ft) with its standard mast.

What fuel does the Hyster H3.5A use?

The Hyster H3.5A is a diesel forklift. Rated output is 44.0 kW (59.0 hp).

How much does the Hyster H3.5A weigh?

The Hyster H3.5A has an operating weight of 4,910 kg (10,825 lb). Check this against your floor loading limits and any trailer or lift you plan to move it on.

What are the dimensions of the Hyster H3.5A?

The Hyster H3.5A measures overall length 3,813 mm (12.5 ft), overall width 1,186 mm (46.7 in), lowered mast height 2,692 mm (8.8 ft).

How much space does the Hyster H3.5A need to turn?

The Hyster H3.5A has an outside turning radius of 2,449 mm (8.0 ft) and a right-angle stacking aisle of 4,144 mm (13.6 ft).

Work out what it costs to run

Sources

Where the specifications on this page came from.