Hyster H3.5FT vs Toyota 50-8FGU32
Key differences
- Engine / Motor Power. The Hyster H3.5FT offers 5.0 kW more engine / motor power than the Toyota 50-8FGU32.
- Maximum Lift Height. The Toyota 50-8FGU32 offers 290 mm more maximum lift height than the Hyster H3.5FT.
- Operating Weight. These differ: Hyster H3.5FT 4,799 kg, Toyota 50-8FGU32 4,320 kg.
- Gradeability (laden). The Toyota 50-8FGU32 offers 4.5% more gradeability (laden) than the Hyster H3.5FT.
- Rated Lift Capacity. Hyster H3.5FT: 3,500 kg (at 500 mm load centre) · Toyota 50-8FGU32: 3,000 kg (at 600 mm load centre). Load centres differ or are not specified; these capacity ratings are not directly comparable and do not establish a capacity winner. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
- Lift Speed (laden). The Hyster H3.5FT offers 90 mm/s more lift speed (laden) than the Toyota 50-8FGU32.
Hyster H3.5FT: 3,500 kg (at 500 mm load centre) · Toyota 50-8FGU32: 3,000 kg (at 600 mm load centre). Load centres differ or are not specified; these capacity ratings are not directly comparable and do not establish a capacity winner. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
Toyota 50-8FGU32 leads with the higher figure on maximum lift height: its published 3,345 mm compares with 3,055 mm for Hyster H3.5FT. That is an absolute difference of 290 mm (9.5% against the latter figure).
The travel speed (laden) figures separate Hyster H3.5FT and Toyota 50-8FGU32. Hyster H3.5FT leads with the higher figure with 20.0 km/h; Toyota 50-8FGU32 records 18.0 km/h, a gap of 2.0 km/h or 11.1% of that second value.
On lift speed (laden), Hyster H3.5FT leads with the higher figure at 600 mm/s versus 510 mm/s for Toyota 50-8FGU32. The measured gap is 90 mm/s, or 17.6% relative to the latter published value.
Hyster H3.5FT has the higher published figure on operating weight: its published 4,799 kg compares with 4,320 kg for Toyota 50-8FGU32. That is an absolute difference of 479 kg (11.1% against the latter figure).
The outside turning radius figures separate Toyota 50-8FGU32 and Hyster H3.5FT. Toyota 50-8FGU32 leads with the lower figure with 2,370 mm; Hyster H3.5FT records 2,380 mm, a gap of 10 mm or 0.4% of that second value.
Highlighted values lead on that specification. An arrow indicates whether a higher or lower figure is preferred.
| Specification | Hyster H3.5FT | Toyota 50-8FGU32 |
|---|---|---|
| Capacity & Load | ||
| Rated Lift Capacity | 3,500 kg (7,716 lb) (at 500 mm load centre) | 3,000 kg (6,614 lb) (at 600 mm load centre) |
| Load Centre | 500 mm (19.7 in) | 600 mm (23.6 in) |
| Maximum Lift Height | 3,055 mm (10.0 ft) | 3,345 mm (11.0 ft) |
| Free Lift | 140 mm (5.5 in) | 135 mm (5.3 in) |
| Mast & Forks | ||
| Mast Type | 2-stage limited free lift | Wide-view 2-stage (V) |
| Mast Height Lowered | 2,195 mm (7.2 ft) | 2,165 mm (7.1 ft) |
| Mast Height Extended | 3,805 mm (12.5 ft) | 4,565 mm (15.0 ft) |
| Mast Tilt Forward | 6deg | 6deg |
| Mast Tilt Backward | 5deg | 11deg |
| Fork Length | 1,000 mm (39.4 in) | 1,070 mm (42.1 in) |
| Fork Width | 120 mm (4.7 in) | 125 mm (4.9 in) |
| Fork Thickness | 50 mm (2.0 in) | 45 mm (1.8 in) |
| Fork Carriage Class | III A | Not specified |
| Engine & Powertrain | ||
| Fuel Type | Diesel | LPG |
| Power Source | Internal Combustion | Internal Combustion |
| Engine Manufacturer | Yanmar | Toyota |
| Engine Model | 4TNE98 (3.3 L) | 4Y-US (2.2 L) |
| Engine / Motor Power | 43.0 kW (57.7 hp) | 38.0 kW (51.0 hp) |
| Engine Displacement | 3,319 cc | 2,237 cc |
| Cylinders | 4 | 4 |
| Transmission | Electronic Powershift, 1-speed | Powershift, 1 forward / 1 reverse |
| Battery & Fuel | ||
| Fuel Tank Capacity | 52.8 L (13.9 gal) | 60.0 L (15.9 gal) |
| Dimensions | ||
| Overall Length (with forks) | 3,734 mm (12.3 ft) | Not specified |
| Length to Fork Face | 2,734 mm (9.0 ft) | 2,800 mm (9.2 ft) |
| Overall Width | 1,186 mm (46.7 in) | 1,240 mm (48.8 in) |
| Height to Overhead Guard | 2,185 mm (7.2 ft) | 2,170 mm (7.1 ft) |
| Wheelbase | 1,700 mm (66.9 in) | 1,700 mm (66.9 in) |
| Ground Clearance | 185 mm (7.3 in) | 185 mm (7.3 in) |
| Outside Turning Radius | 2,380 mm (7.8 ft) | 2,370 mm (7.8 ft) |
| Right-Angle Stacking Aisle (incl. load) | 4,063 mm (13.3 ft) | Not specified |
| Right-Angle Stacking Aisle (excl. load) | Not specified | 2,855 mm (9.4 ft) |
| Working Aisle (VDI 4.34), 1000x1200 Crossways | 4,063 mm (13.3 ft) | Not specified |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise | 4,263 mm (14.0 ft) | Not specified |
| Load Distance (x) | 483 mm (19.0 in) | 485 mm (19.1 in) |
| Internal Turning Radius (b13) | 647 mm (25.5 in) | Not specified |
| Weights | ||
| Operating Weight | 4,799 kg (10,580 lb) | 4,320 kg (9,524 lb) |
| Front Axle Load (laden) | 7,319 kg (16,136 lb) | 6,670 kg (14,705 lb) |
| Rear Axle Load (laden) | 980 kg (2,161 lb) | 900 kg (1,984 lb) |
| Performance | ||
| Travel Speed (laden) | 20.0 km/h (12.4 mph) | 18.0 km/h (11.2 mph) |
| Travel Speed (unladen) | 21.1 km/h (13.1 mph) | 18.5 km/h (11.5 mph) |
| Lift Speed (laden) | 600 mm/s (118.1 ft/min) | 510 mm/s (100.4 ft/min) |
| Lift Speed (unladen) | 600 mm/s (118.1 ft/min) | 550 mm/s (108.3 ft/min) |
| Lowering Speed (laden) | 530 mm/s (104.3 ft/min) | 500 mm/s (98.4 ft/min) |
| Gradeability (laden) | 16.5% | 21.0% |
| Drawbar Pull (laden) | 17,450 N (3,923 lbf) | Not specified |
| Tyres, Brakes & Chassis | ||
| Tyre Type | Solid Pneumatic | Pneumatic |
| Front Tyre Size | 28 x 9-15 | 28 x 9-15-14PR |
| Rear Tyre Size | 6.50 x 10 | 6.50-10-10PR |
| Wheels (front / rear) | 2x / 2 | 2x / 2 |
| Service Brake | Hydraulic, drum | Hydraulic |
| Operator Position | Seated | Seated |
| General | ||
| Noise Level at Operator Ear | 79 dB(A) | Not specified |
| Warranty | 24 months / 4,000 hours (manufacturer standard) | Not specified |
What the numbers say
This is a cross-brand comparison: Hyster H3.5FT (Fortens FT), Toyota 50-8FGU32 (Core IC Pneumatic 8FGU).
Hyster H3.5FT: 3,500 kg (at 500 mm load centre); Toyota 50-8FGU32: 3,000 kg (at 600 mm load centre). Load centres differ or are not specified; these capacity ratings are not directly comparable and do not establish a capacity winner. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
For racking, the Toyota 50-8FGU32 reaches 3,345 mm while the Hyster H3.5FT tops out at 3,055 mm, a difference of 290 mm.
Frequently asked questions
How do the published lift capacity ratings of the Hyster H3.5FT and Toyota 50-8FGU32 compare?
Hyster H3.5FT: 3,500 kg (at 500 mm load centre). Toyota 50-8FGU32: 3,000 kg (at 600 mm load centre). Load centres differ or are not specified; these capacity ratings are not directly comparable and do not establish a capacity winner. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
How do the lift heights of the Hyster H3.5FT and Toyota 50-8FGU32 compare?
Hyster H3.5FT: 3,055 mm. Toyota 50-8FGU32: 3,345 mm.
How do the turning radii of the Hyster H3.5FT and Toyota 50-8FGU32 compare?
Hyster H3.5FT: 2,380 mm. Toyota 50-8FGU32: 2,370 mm.
How do the operating weights of the Hyster H3.5FT and Toyota 50-8FGU32 compare?
Hyster H3.5FT: 4,799 kg. Toyota 50-8FGU32: 4,320 kg.
What is the main difference between the Hyster H3.5FT and Toyota 50-8FGU32?
The Hyster H3.5FT offers 5.0 kW more engine / motor power than the Toyota 50-8FGU32. The Toyota 50-8FGU32 offers 290 mm more maximum lift height than the Hyster H3.5FT. These differ: Hyster H3.5FT 4,799 kg, Toyota 50-8FGU32 4,320 kg.
Do the Hyster H3.5FT and Toyota 50-8FGU32 use the same fuel type?
No. Hyster H3.5FT: Diesel. Toyota 50-8FGU32: LPG.