Hyster H3.0A LPG Specifications
The Hyster H3.0A LPG has a capacity of 3,000 kg, a lift height of 3,880 mm and a weight of 4,642 kg, per the specification table below.
3.0 tonne LPG counterbalance forklift from the Hyster A series with Yanmar 2.2 L LPG engine. Chassis and mast figures are shared with the diesel H3.0A; engine and performance figures are from the LPG table of Hyster's 2022 technical guide.
Key specifications
- Capacity
- 3,000 kg (6,614 lb)
- Lift Height
- 3,880 mm (12.7 ft)
- Fuel
- LPG
- Power
- 42.0 kW (56.3 hp)
- Width
- 1,186 mm (46.7 in)
- Turning Radius
- 2,374 mm (7.8 ft)
- Weight
- 4,642 kg (10,234 lb)
How the H3.0A LPG compares
At 3,000 kg the Hyster H3.0A LPG has the 3rd highest rated capacity of the 20 lpg forklifts with a published figure in this database (range 1,350 kg to 3,500 kg). The Hyster H3.0A LPG in the A Series range has a 3,880 mm lift height, the 3rd highest of 20 in lpg forklifts, against a category median of 3,340 mm.
The Hyster H3.0A LPG weighs 1,547 kg per tonne of rated capacity, 3% below the category median of 1,591 kg.
The Hyster H3.0A LPG is one of 9 models listed in the A Series range, which covers 2,000 kg to 3,500 kg. One rating down is the Hyster H2.5A LPG at 2,500 kg (-652 kg operating weight); one rating up is the Hyster H3.5A at 3,500 kg (+268 kg operating weight).
Against the Hyster H3.0A LPG, the closest rated capacity from another manufacturer in this category is the Toyota 40-8FGU32 at 3,000 kg. The Toyota 40-8FGU32 is 252 kg lighter than the Hyster H3.0A LPG in operating weight.
The Hyster H3.0A LPG is listed with a Yanmar 4TN88G (2.2 L) engine rated at 42.0 kW, a 2-stage limited free lift mast, Solid Pneumatic, front 28 x 9-15, rear 6.5 x 10 tyres, a Electronic Powershift, 1-speed transmission, a seated operator position.
Hyster H3.0A LPG full specifications
Capacity & Load
| Rated Lift Capacity ? | 3,000 kg (6,614 lb) |
|---|---|
| Load Centre ? | 500 mm (19.7 in) |
| Maximum Lift Height ? | 3,880 mm (12.7 ft) |
| Capacity at Maximum Height ? | Not specified |
| Free Lift ? | 50 mm (2.0 in) |
Mast & Forks
| Mast Type | 2-stage limited free lift |
|---|---|
| Mast Height Lowered ? | 2,692 mm (8.8 ft) |
| Mast Height Extended | 4,552 mm (14.9 ft) |
| Mast Tilt Forward | 6deg |
| Mast Tilt Backward | 6deg |
| Fork Length | 1,000 mm (39.4 in) |
| Fork Width | 120 mm (4.7 in) |
| Fork Thickness | 50 mm (2.0 in) |
| Fork Carriage Class ? | III A |
Engine & Powertrain
| Fuel Type | LPG |
|---|---|
| Power Source | Internal Combustion |
| Engine Manufacturer | Yanmar |
| Engine Model | 4TN88G (2.2 L) |
| Engine / Motor Power ? | 42.0 kW (56.3 hp) |
| Engine Displacement | 2,190 cc |
| Cylinders | 4 |
| Drive Motor Power | Not specified |
| Lift Motor Power | Not specified |
| Transmission | Electronic Powershift, 1-speed |
Dimensions
| Overall Length (with forks) | 3,746 mm (12.3 ft) |
|---|---|
| Length to Fork Face | 2,731 mm (9.0 ft) |
| Overall Width ? | 1,186 mm (46.7 in) |
| Overall Height | Not specified |
| Height to Overhead Guard | 2,182 mm (7.2 ft) |
| Wheelbase | 1,700 mm (66.9 in) |
| Ground Clearance | 182 mm (7.2 in) |
| Outside Turning Radius ? | 2,374 mm (7.8 ft) |
| Right-Angle Stacking Aisle (incl. load) ? | 4,069 mm (13.3 ft) |
| Right-Angle Stacking Aisle (excl. load) ? | Not specified |
| Working Aisle (VDI 4.34), 1000x1200 Crossways ? | 4,069 mm (13.3 ft) |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise ? | 4,269 mm (14.0 ft) |
| Load Distance (x) ? | 495 mm (19.5 in) |
| Internal Turning Radius (b13) ? | 660 mm (26.0 in) |
Weights
| Operating Weight ? | 4,642 kg (10,234 lb) |
|---|---|
| Front Axle Load (laden) | 6,635 kg (14,628 lb) |
| Rear Axle Load (laden) | 1,007 kg (2,220 lb) |
Performance
| Travel Speed (laden) | 18.4 km/h (11.4 mph) |
|---|---|
| Travel Speed (unladen) | 18.6 km/h (11.6 mph) |
| Lift Speed (laden) | 560 mm/s (110.2 ft/min) |
| Lift Speed (unladen) | 610 mm/s (120.1 ft/min) |
| Lowering Speed (laden) | 580 mm/s (114.2 ft/min) |
| Gradeability (laden) | 23.0% |
| Drawbar Pull (laden) | 16,766 N (3,769 lbf) |
Tyres, Brakes & Chassis
| Tyre Type | Solid Pneumatic |
|---|---|
| Front Tyre Size | 28 x 9-15 |
| Rear Tyre Size | 6.5 x 10 |
| Wheels (front / rear) | 2x / 2 |
| Service Brake | Hydraulic, drum |
| Steering | Not specified |
| Operator Position | Seated |
General
| Noise Level at Operator Ear | 77 dB(A) |
|---|---|
| Ingress Protection Rating | Not specified |
| Warranty | 24 months / 4,000 hours (manufacturer standard) |
Not published for this model
- Battery Voltage
- Battery Type
- Capacity at Maximum Height
- Drive Motor Power
- Lift Motor Power
- Battery Capacity
Compare the H3.0A LPG
Alternatives from other manufacturers
Frequently asked questions
What is the lift capacity of the Hyster H3.0A LPG?
The Hyster H3.0A LPG has a rated lift capacity of 3,000 kg (6,614 lb) at a 500 mm (19.7 in) load centre, ranking 3rd of 20 lpg forklifts with a published capacity.
How high does the Hyster H3.0A LPG lift?
The Hyster H3.0A LPG lifts to a maximum fork height of 3,880 mm (12.7 ft) with its standard mast.
What fuel does the Hyster H3.0A LPG use?
The Hyster H3.0A LPG is a lpg forklift, with a rated output of 42.0 kW (56.3 hp).
How much does the Hyster H3.0A LPG weigh?
The Hyster H3.0A LPG has an operating weight of 4,642 kg (10,234 lb).
What are the dimensions of the Hyster H3.0A LPG?
The Hyster H3.0A LPG measures overall length 3,746 mm (12.3 ft), overall width 1,186 mm (46.7 in), lowered mast height 2,692 mm (8.8 ft).
How much space does the Hyster H3.0A LPG need to turn?
The Hyster H3.0A LPG has an outside turning radius of 2,374 mm (7.8 ft) and a right-angle stacking aisle of 4,069 mm (13.3 ft).
What engine does the Hyster H3.0A LPG list?
The Hyster H3.0A LPG lists a Yanmar 4TN88G (2.2 L) engine rated at 42.0 kW (56.3 hp).
What mast does the Hyster H3.0A LPG list?
The Hyster H3.0A LPG is listed with a 2-stage limited free lift mast.
What tyres does the Hyster H3.0A LPG list?
The Hyster H3.0A LPG is listed with Solid Pneumatic, front 28 x 9-15, rear 6.5 x 10 tyres.
Sources
Source recorded for the Hyster H3.0A LPG.