Hyster LPG Forklifts

Hyster H2.5A LPG

2.5 tonne LPG counterbalance forklift from the Hyster A series with Yanmar 2.2 L LPG engine. Chassis and mast figures are shared with the diesel H2.5A; engine and performance figures are from the LPG table of Hyster's 2022 technical guide.

82% Checked against source

Compare H2.5A LPG Build a comparison

Key specifications

Capacity
2,500 kg (5,512 lb)
Lift Height
3,900 mm (12.8 ft)
Fuel
LPG
Power
42.0 kW (56.3 hp)
Width
1,160 mm (45.7 in)
Turning Radius
2,263 mm (7.4 ft)
Weight
3,990 kg (8,796 lb)

Hyster H2.5A LPG full specifications

Capacity & Load

Rated Lift Capacity ? 2,500 kg (5,512 lb)
Load Centre ? 500 mm (19.7 in)
Maximum Lift Height ? 3,900 mm (12.8 ft)
Capacity at Maximum Height ? Not specified
Free Lift ? 50 mm (2.0 in)

Mast & Forks

Mast Type 2-stage limited free lift
Mast Height Lowered ? 2,570 mm (8.4 ft)
Mast Height Extended 4,500 mm (14.8 ft)
Mast Tilt Forward 6deg
Mast Tilt Backward 6deg
Fork Length 1,000 mm (39.4 in)
Fork Width 100 mm (3.9 in)
Fork Thickness 40 mm (1.6 in)
Fork Carriage Class ? II A

Engine & Powertrain

Fuel Type LPG
Power Source Internal Combustion
Engine Manufacturer Yanmar
Engine Model 4TN88G (2.2 L)
Engine / Motor Power ? 42.0 kW (56.3 hp)
Engine Displacement 2,190 cc
Cylinders 4
Drive Motor Power Not specified
Lift Motor Power Not specified
Transmission Electronic Powershift, 1-speed

Dimensions

Overall Length (with forks) 3,610 mm (11.8 ft)
Length to Fork Face 2,579 mm (8.5 ft)
Overall Width ? 1,160 mm (45.7 in)
Overall Height Not specified
Height to Overhead Guard 2,160 mm (7.1 ft)
Wheelbase 1,650 mm (65.0 in)
Ground Clearance 160 mm (6.3 in)
Outside Turning Radius ? 2,263 mm (7.4 ft)
Right-Angle Stacking Aisle (incl. load) ? 3,933 mm (12.9 ft)
Right-Angle Stacking Aisle (excl. load) ? Not specified

Weights

Operating Weight ? 3,990 kg (8,796 lb)
Front Axle Load (laden) 5,698 kg (12,562 lb)
Rear Axle Load (laden) 792 kg (1,746 lb)

Performance

Travel Speed (laden) 18.4 km/h (11.4 mph)
Travel Speed (unladen) 18.7 km/h (11.6 mph)
Lift Speed (laden) 600 mm/s (118.1 ft/min)
Lift Speed (unladen) 650 mm/s (128.0 ft/min)
Lowering Speed (laden) 580 mm/s (114.2 ft/min)
Gradeability (laden) 28.0%
Drawbar Pull (laden) 17,145 N (3,854 lbf)

Tyres, Brakes & Chassis

Tyre Type Solid Pneumatic
Front Tyre Size 7.00 x 12
Rear Tyre Size 6.00 x 9
Wheels (front / rear) 2x / 2
Service Brake Hydraulic, drum
Steering Not specified
Operator Position Seated

General

Noise Level at Operator Ear 77 dB(A)
Ingress Protection Rating Not specified
Warranty 24 months / 4,000 hours (manufacturer standard)

Not published for this model

We only publish figures we can source. These specifications are not in the documents we hold for this machine:

  • Battery Voltage
  • Battery Type
  • Capacity at Maximum Height
  • Drive Motor Power
  • Lift Motor Power
  • Battery Capacity

Ask the dealer for the full specification sheet if one of these matters to your decision.

Alternatives from other manufacturers

Machines in the same capacity class, from a different brand.

Frequently asked questions

What is the lift capacity of the Hyster H2.5A LPG?

The Hyster H2.5A LPG has a rated lift capacity of 2,500 kg (5,512 lb) at a 500 mm (19.7 in) load centre.

How high does the Hyster H2.5A LPG lift?

The Hyster H2.5A LPG lifts to a maximum fork height of 3,900 mm (12.8 ft) with its standard mast.

What fuel does the Hyster H2.5A LPG use?

The Hyster H2.5A LPG is a lpg forklift. Rated output is 42.0 kW (56.3 hp).

How much does the Hyster H2.5A LPG weigh?

The Hyster H2.5A LPG has an operating weight of 3,990 kg (8,796 lb). Check this against your floor loading limits and any trailer or lift you plan to move it on.

What are the dimensions of the Hyster H2.5A LPG?

The Hyster H2.5A LPG measures overall length 3,610 mm (11.8 ft), overall width 1,160 mm (45.7 in), lowered mast height 2,570 mm (8.4 ft).

How much space does the Hyster H2.5A LPG need to turn?

The Hyster H2.5A LPG has an outside turning radius of 2,263 mm (7.4 ft) and a right-angle stacking aisle of 3,933 mm (12.9 ft).

Work out what it costs to run

Sources

Where the specifications on this page came from.