Hyster Diesel Forklifts

Hyster H2.5A6 Specifications

The Hyster H2.5A6 has a capacity of 2,500 kg, a lift height of 3,900 mm and a weight of 4,292 kg, per the specification table below.

2.5 tonne diesel counterbalance forklift from the Hyster A series with Yanmar 2.1 L engine (600 mm load centre variant). Figures are for the standard powershift configuration with two-stage mast and 1,000 mm forks, from Hyster's 2022 technical guide.

83% Checked against source

Compare H2.5A6 Build a comparison

Key specifications

Capacity
2,500 kg (5,512 lb)
Lift Height
3,900 mm (12.8 ft)
Fuel
Diesel
Power
44.0 kW (59.0 hp)
Width
1,186 mm (46.7 in)
Turning Radius
2,333 mm (7.7 ft)
Weight
4,292 kg (9,462 lb)

How the H2.5A6 compares

At 2,500 kg the Hyster H2.5A6 has the 11th highest rated capacity of the 15 diesel forklifts with a published figure in this database (range 2,000 kg to 5,500 kg). The Hyster H2.5A6 in the A Series range has a 3,900 mm lift height, the 1st highest of 15 in diesel forklifts, against a category median of 3,055 mm.

The Hyster H2.5A6 weighs 1,717 kg per tonne of rated capacity, 10% above the category median of 1,561 kg.

The Hyster H2.5A6 is one of 9 models listed in the A Series range, which covers 2,000 kg to 3,500 kg. One rating down is the Hyster H2.0A LPG at 2,000 kg (-679 kg operating weight); one rating up is the Hyster H3.0A at 3,000 kg (+350 kg operating weight).

The Hyster H2.5A6 is listed with a Yanmar 4TNV86CHT (2.1 L) engine rated at 44.0 kW, a 2-stage limited free lift mast, Solid Pneumatic, front 28 x 9-15, rear 6.5 x 10 tyres, a Electronic Powershift, 1-speed transmission, a seated operator position.

Hyster H2.5A6 full specifications

Capacity & Load

Rated Lift Capacity ? 2,500 kg (5,512 lb)
Load Centre ? 600 mm (23.6 in)
Maximum Lift Height ? 3,900 mm (12.8 ft)
Capacity at Maximum Height ? Not specified
Free Lift ? 50 mm (2.0 in)

Mast & Forks

Mast Type 2-stage limited free lift
Mast Height Lowered ? 2,592 mm (8.5 ft)
Mast Height Extended 4,500 mm (14.8 ft)
Mast Tilt Forward 6deg
Mast Tilt Backward 6deg
Fork Length 1,000 mm (39.4 in)
Fork Width 120 mm (4.7 in)
Fork Thickness 50 mm (2.0 in)
Fork Carriage Class ? II A

Engine & Powertrain

Fuel Type Diesel
Power Source Internal Combustion
Engine Manufacturer Yanmar
Engine Model 4TNV86CHT (2.1 L)
Engine / Motor Power ? 44.0 kW (59.0 hp)
Engine Displacement 2,091 cc
Cylinders 4
Drive Motor Power Not specified
Lift Motor Power Not specified
Transmission Electronic Powershift, 1-speed

Battery & Fuel

Battery Voltage Not specified
Battery Capacity Not specified
Battery Energy ? Not specified
Battery Type Not specified
Minimum Battery Weight ? Not specified
Fuel Tank Capacity 39.9 L (10.5 gal)
LPG Cylinder Size Not specified

Dimensions

Overall Length (with forks) 3,714 mm (12.2 ft)
Length to Fork Face 2,676 mm (8.8 ft)
Overall Width ? 1,186 mm (46.7 in)
Overall Height Not specified
Height to Overhead Guard 2,182 mm (7.2 ft)
Wheelbase 1,700 mm (66.9 in)
Ground Clearance 182 mm (7.2 in)
Outside Turning Radius ? 2,333 mm (7.7 ft)
Right-Angle Stacking Aisle (incl. load) ? 4,027 mm (13.2 ft)
Right-Angle Stacking Aisle (excl. load) ? Not specified
Working Aisle (VDI 4.34), 1000x1200 Crossways ? 4,027 mm (13.2 ft)
Working Aisle (VDI 4.34), 800x1200 Lengthwise ? 4,227 mm (13.9 ft)
Load Distance (x) ? 495 mm (19.5 in)
Internal Turning Radius (b13) ? 660 mm (26.0 in)

Weights

Operating Weight ? 4,292 kg (9,462 lb)
Front Axle Load (laden) 5,900 kg (13,007 lb)
Rear Axle Load (laden) 921 kg (2,030 lb)

Performance

Travel Speed (laden) 18.5 km/h (11.5 mph)
Travel Speed (unladen) 18.7 km/h (11.6 mph)
Lift Speed (laden) 600 mm/s (118.1 ft/min)
Lift Speed (unladen) 650 mm/s (128.0 ft/min)
Lowering Speed (laden) 580 mm/s (114.2 ft/min)
Gradeability (laden) 30.0%
Drawbar Pull (laden) 19,314 N (4,342 lbf)

Tyres, Brakes & Chassis

Tyre Type Solid Pneumatic
Front Tyre Size 28 x 9-15
Rear Tyre Size 6.5 x 10
Wheels (front / rear) 2x / 2
Service Brake Hydraulic, drum
Steering Not specified
Operator Position Seated

General

Noise Level at Operator Ear 79 dB(A)
Ingress Protection Rating Not specified
Warranty 24 months / 4,000 hours (manufacturer standard)

Not published for this model

  • Battery Voltage
  • Battery Type
  • Capacity at Maximum Height
  • Drive Motor Power
  • Lift Motor Power
  • Battery Capacity

Alternatives from other manufacturers

Linde

X25

  • Capacity2,500 kg
  • Lift height3,095 mm
  • FuelElectric

84% Compare

Toyota

40-8FGU30

  • Capacity2,700 kg
  • Lift height3,345 mm
  • FuelDual Fuel LPG/Petrol

77% Compare

Frequently asked questions

What is the lift capacity of the Hyster H2.5A6?

The Hyster H2.5A6 has a rated lift capacity of 2,500 kg (5,512 lb) at a 600 mm (23.6 in) load centre, ranking 11th of 15 diesel forklifts with a published capacity.

How high does the Hyster H2.5A6 lift?

The Hyster H2.5A6 lifts to a maximum fork height of 3,900 mm (12.8 ft) with its standard mast.

What fuel does the Hyster H2.5A6 use?

The Hyster H2.5A6 is a diesel forklift, with a rated output of 44.0 kW (59.0 hp).

How much does the Hyster H2.5A6 weigh?

The Hyster H2.5A6 has an operating weight of 4,292 kg (9,462 lb).

What are the dimensions of the Hyster H2.5A6?

The Hyster H2.5A6 measures overall length 3,714 mm (12.2 ft), overall width 1,186 mm (46.7 in), lowered mast height 2,592 mm (8.5 ft).

How much space does the Hyster H2.5A6 need to turn?

The Hyster H2.5A6 has an outside turning radius of 2,333 mm (7.7 ft) and a right-angle stacking aisle of 4,027 mm (13.2 ft).

What engine does the Hyster H2.5A6 list?

The Hyster H2.5A6 lists a Yanmar 4TNV86CHT (2.1 L) engine rated at 44.0 kW (59.0 hp).

What mast does the Hyster H2.5A6 list?

The Hyster H2.5A6 is listed with a 2-stage limited free lift mast.

What tyres does the Hyster H2.5A6 list?

The Hyster H2.5A6 is listed with Solid Pneumatic, front 28 x 9-15, rear 6.5 x 10 tyres.

Running cost

Running-cost calculators for the Hyster H2.5A6 use figures you enter and this page does not publish a price.

Sources

Source recorded for the Hyster H2.5A6.