Hyster H2.0A Specifications
The Hyster H2.0A has a capacity of 2,000 kg, a lift height of 3,900 mm and a weight of 3,613 kg, per the specification table below.
2.0 tonne diesel counterbalance forklift from the Hyster A series with Yanmar 2.1 L engine. Figures are for the standard powershift configuration with two-stage mast and 1,000 mm forks, from Hyster's 2022 technical guide.
Key specifications
- Capacity
- 2,000 kg (4,409 lb)
- Lift Height
- 3,900 mm (12.8 ft)
- Fuel
- Diesel
- Power
- 36.6 kW (49.1 hp)
- Width
- 1,160 mm (45.7 in)
- Turning Radius
- 2,191 mm (7.2 ft)
- Weight
- 3,613 kg (7,965 lb)
How the H2.0A compares
At 2,000 kg the Hyster H2.0A has the 14th highest rated capacity of the 15 diesel forklifts with a published figure in this database (range 2,000 kg to 5,500 kg). The Hyster H2.0A in the A Series range has a 3,900 mm lift height, the 1st highest of 15 in diesel forklifts, against a category median of 3,055 mm.
The Hyster H2.0A weighs 1,807 kg per tonne of rated capacity, 16% above the category median of 1,561 kg.
The Hyster H2.0A is one of 9 models listed in the A Series range, which covers 2,000 kg to 3,500 kg. One rating up is the Hyster H2.5A at 2,500 kg (+377 kg operating weight).
The Hyster H2.0A is listed with a Yanmar 4TNV86CT (2.1 L) engine rated at 36.6 kW, a 2-stage limited free lift mast, Solid Pneumatic, front 7.00 x 12, rear 6.00 x 9 tyres, a Electronic Powershift, 1-speed transmission, a seated operator position.
Hyster H2.0A full specifications
Capacity & Load
| Rated Lift Capacity ? | 2,000 kg (4,409 lb) |
|---|---|
| Load Centre ? | 500 mm (19.7 in) |
| Maximum Lift Height ? | 3,900 mm (12.8 ft) |
| Capacity at Maximum Height ? | Not specified |
| Free Lift ? | 50 mm (2.0 in) |
Mast & Forks
| Mast Type | 2-stage limited free lift |
|---|---|
| Mast Height Lowered ? | 2,570 mm (8.4 ft) |
| Mast Height Extended | 4,500 mm (14.8 ft) |
| Mast Tilt Forward | 6deg |
| Mast Tilt Backward | 6deg |
| Fork Length | 1,000 mm (39.4 in) |
| Fork Width | 100 mm (3.9 in) |
| Fork Thickness | 40 mm (1.6 in) |
| Fork Carriage Class ? | II A |
Engine & Powertrain
| Fuel Type | Diesel |
|---|---|
| Power Source | Internal Combustion |
| Engine Manufacturer | Yanmar |
| Engine Model | 4TNV86CT (2.1 L) |
| Engine / Motor Power ? | 36.6 kW (49.1 hp) |
| Engine Displacement | 2,091 cc |
| Cylinders | 4 |
| Drive Motor Power | Not specified |
| Lift Motor Power | Not specified |
| Transmission | Electronic Powershift, 1-speed |
Battery & Fuel
| Battery Voltage | Not specified |
|---|---|
| Battery Capacity | Not specified |
| Battery Energy ? | Not specified |
| Battery Type | Not specified |
| Minimum Battery Weight ? | Not specified |
| Fuel Tank Capacity | 39.9 L (10.5 gal) |
| LPG Cylinder Size | Not specified |
Dimensions
| Overall Length (with forks) | 3,534 mm (11.6 ft) |
|---|---|
| Length to Fork Face | 2,516 mm (8.3 ft) |
| Overall Width ? | 1,160 mm (45.7 in) |
| Overall Height | Not specified |
| Height to Overhead Guard | 2,160 mm (7.1 ft) |
| Wheelbase | 1,650 mm (65.0 in) |
| Ground Clearance | 160 mm (6.3 in) |
| Outside Turning Radius ? | 2,191 mm (7.2 ft) |
| Right-Angle Stacking Aisle (incl. load) ? | 3,861 mm (12.7 ft) |
| Right-Angle Stacking Aisle (excl. load) ? | Not specified |
| Working Aisle (VDI 4.34), 1000x1200 Crossways ? | 3,861 mm (12.7 ft) |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise ? | 4,061 mm (13.3 ft) |
| Load Distance (x) ? | 470 mm (18.5 in) |
| Internal Turning Radius (b13) ? | 640 mm (25.2 in) |
Weights
| Operating Weight ? | 3,613 kg (7,965 lb) |
|---|---|
| Front Axle Load (laden) | 4,981 kg (10,981 lb) |
| Rear Axle Load (laden) | 632 kg (1,393 lb) |
Performance
| Travel Speed (laden) | 18.5 km/h (11.5 mph) |
|---|---|
| Travel Speed (unladen) | 18.7 km/h (11.6 mph) |
| Lift Speed (laden) | 610 mm/s (120.1 ft/min) |
| Lift Speed (unladen) | 650 mm/s (128.0 ft/min) |
| Lowering Speed (laden) | 580 mm/s (114.2 ft/min) |
| Gradeability (laden) | 30.0% |
| Drawbar Pull (laden) | 15,917 N (3,578 lbf) |
Tyres, Brakes & Chassis
| Tyre Type | Solid Pneumatic |
|---|---|
| Front Tyre Size | 7.00 x 12 |
| Rear Tyre Size | 6.00 x 9 |
| Wheels (front / rear) | 2x / 2 |
| Service Brake | Hydraulic, drum |
| Steering | Not specified |
| Operator Position | Seated |
General
| Noise Level at Operator Ear | 78 dB(A) |
|---|---|
| Ingress Protection Rating | Not specified |
| Warranty | 24 months / 4,000 hours (manufacturer standard) |
Not published for this model
- Battery Voltage
- Battery Type
- Capacity at Maximum Height
- Drive Motor Power
- Lift Motor Power
- Battery Capacity
Compare the H2.0A
Alternatives from other manufacturers
Frequently asked questions
What is the lift capacity of the Hyster H2.0A?
The Hyster H2.0A has a rated lift capacity of 2,000 kg (4,409 lb) at a 500 mm (19.7 in) load centre, ranking 14th of 15 diesel forklifts with a published capacity.
How high does the Hyster H2.0A lift?
The Hyster H2.0A lifts to a maximum fork height of 3,900 mm (12.8 ft) with its standard mast.
What fuel does the Hyster H2.0A use?
The Hyster H2.0A is a diesel forklift, with a rated output of 36.6 kW (49.1 hp).
How much does the Hyster H2.0A weigh?
The Hyster H2.0A has an operating weight of 3,613 kg (7,965 lb).
What are the dimensions of the Hyster H2.0A?
The Hyster H2.0A measures overall length 3,534 mm (11.6 ft), overall width 1,160 mm (45.7 in), lowered mast height 2,570 mm (8.4 ft).
How much space does the Hyster H2.0A need to turn?
The Hyster H2.0A has an outside turning radius of 2,191 mm (7.2 ft) and a right-angle stacking aisle of 3,861 mm (12.7 ft).
What engine does the Hyster H2.0A list?
The Hyster H2.0A lists a Yanmar 4TNV86CT (2.1 L) engine rated at 36.6 kW (49.1 hp).
What mast does the Hyster H2.0A list?
The Hyster H2.0A is listed with a 2-stage limited free lift mast.
What tyres does the Hyster H2.0A list?
The Hyster H2.0A is listed with Solid Pneumatic, front 7.00 x 12, rear 6.00 x 9 tyres.
Sources
Source recorded for the Hyster H2.0A.