Hyster H2.0A vs Linde X20/600
Key differences
- Engine / Motor Power. The Hyster H2.0A offers 11.8 kW more engine / motor power than the Linde X20/600.
- Maximum Lift Height. The Hyster H2.0A offers 805 mm more maximum lift height than the Linde X20/600.
- Overall Width. The Hyster H2.0A offers 96 mm less overall width than the Linde X20/600.
- Outside Turning Radius. The Hyster H2.0A offers 161 mm less outside turning radius than the Linde X20/600.
- Free Lift. The Linde X20/600 offers 100 mm more free lift than the Hyster H2.0A.
- Drawbar Pull (laden). The Hyster H2.0A offers 8,317 N more drawbar pull (laden) than the Linde X20/600.
On maximum lift height, Hyster H2.0A leads with the higher figure at 3,900 mm versus 3,095 mm for Linde X20/600. The measured gap is 805 mm, or 26.0% relative to the latter published value.
Linde X20/600 leads with the higher figure on travel speed (laden): its published 22.0 km/h compares with 18.5 km/h for Hyster H2.0A. That is an absolute difference of 3.5 km/h (18.9% against the latter figure).
The lift speed (laden) figures separate Hyster H2.0A and Linde X20/600. Hyster H2.0A leads with the higher figure with 610 mm/s; Linde X20/600 records 560 mm/s, a gap of 50 mm/s or 8.9% of that second value.
On operating weight, Linde X20/600 has the higher published figure at 4,837 kg versus 3,613 kg for Hyster H2.0A. The measured gap is 1,224 kg, or 33.9% relative to the latter published value.
Hyster H2.0A leads with the lower figure on outside turning radius: its published 2,191 mm compares with 2,352 mm for Linde X20/600. That is an absolute difference of 161 mm (6.8% against the latter figure).
The engine / motor power figures separate Hyster H2.0A and Linde X20/600. Hyster H2.0A leads with the higher figure with 36.6 kW; Linde X20/600 records 24.8 kW, a gap of 11.8 kW or 47.6% of that second value.
Highlighted values lead on that specification. An arrow indicates whether a higher or lower figure is preferred.
| Specification | Hyster H2.0A | Linde X20/600 |
|---|---|---|
| Capacity & Load | ||
| Rated Lift Capacity | 2,000 kg (4,409 lb) (at 500 mm load centre) | 2,000 kg (4,409 lb) (at 600 mm load centre) |
| Load Centre | 500 mm (19.7 in) | 600 mm (23.6 in) |
| Maximum Lift Height | 3,900 mm (12.8 ft) | 3,095 mm (10.2 ft) |
| Free Lift | 50 mm (2.0 in) | 150 mm (5.9 in) |
| Mast & Forks | ||
| Mast Type | 2-stage limited free lift | Standard mast |
| Mast Height Lowered | 2,570 mm (8.4 ft) | 2,220 mm (7.3 ft) |
| Mast Height Extended | 4,500 mm (14.8 ft) | 3,852 mm (12.6 ft) |
| Mast Tilt Forward | 6deg | 5deg |
| Mast Tilt Backward | 6deg | 8deg |
| Fork Length | 1,000 mm (39.4 in) | 1,000 mm (39.4 in) |
| Fork Width | 100 mm (3.9 in) | 100 mm (3.9 in) |
| Fork Thickness | 40 mm (1.6 in) | 45 mm (1.8 in) |
| Fork Carriage Class | II A | 2A |
| Engine & Powertrain | ||
| Fuel Type | Diesel | Electric |
| Power Source | Internal Combustion | Battery Electric |
| Engine Manufacturer | Yanmar | Not specified |
| Engine Model | 4TNV86CT (2.1 L) | Not specified |
| Engine / Motor Power | 36.6 kW (49.1 hp) | 24.8 kW (33.3 hp) |
| Engine Displacement | 2,091 cc | Not specified |
| Cylinders | 4 | Not specified |
| Drive Motor Power | Not specified | 12.4 kW (16.6 hp) |
| Lift Motor Power | Not specified | 20.0 kW (26.8 hp) |
| Transmission | Electronic Powershift, 1-speed | Synchronous reluctance motors, stepless digital control |
| Battery & Fuel | ||
| Battery Voltage | Not specified | 90 V |
| Battery Capacity | Not specified | 670 Ah |
| Battery Energy | Not specified | 60.3 kWh |
| Battery Type | Not specified | Lithium-ion |
| Fuel Tank Capacity | 39.9 L (10.5 gal) | Not specified |
| Dimensions | ||
| Overall Length (with forks) | 3,534 mm (11.6 ft) | 3,671 mm (12.0 ft) |
| Length to Fork Face | 2,516 mm (8.3 ft) | 2,671 mm (8.8 ft) |
| Overall Width | 1,160 mm (45.7 in) | 1,256 mm (49.4 in) |
| Height to Overhead Guard | 2,160 mm (7.1 ft) | 2,225 mm (7.3 ft) |
| Wheelbase | 1,650 mm (65.0 in) | 1,835 mm (72.2 in) |
| Ground Clearance | 160 mm (6.3 in) | 173 mm (6.8 in) |
| Outside Turning Radius | 2,191 mm (7.2 ft) | 2,352 mm (7.7 ft) |
| Right-Angle Stacking Aisle (incl. load) | 3,861 mm (12.7 ft) | 4,008 mm (13.1 ft) |
| Working Aisle (VDI 4.34), 1000x1200 Crossways | 3,861 mm (12.7 ft) | 4,008 mm (13.1 ft) |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise | 4,061 mm (13.3 ft) | 4,208 mm (13.8 ft) |
| Load Distance (x) | 470 mm (18.5 in) | 455 mm (17.9 in) |
| Internal Turning Radius (b13) | 640 mm (25.2 in) | 655 mm (25.8 in) |
| Weights | ||
| Operating Weight | 3,613 kg (7,965 lb) | 4,837 kg (10,664 lb) |
| Front Axle Load (laden) | 4,981 kg (10,981 lb) | 5,663 kg (12,485 lb) |
| Rear Axle Load (laden) | 632 kg (1,393 lb) | 1,174 kg (2,588 lb) |
| Performance | ||
| Travel Speed (laden) | 18.5 km/h (11.5 mph) | 22.0 km/h (13.7 mph) |
| Travel Speed (unladen) | 18.7 km/h (11.6 mph) | 22.0 km/h (13.7 mph) |
| Lift Speed (laden) | 610 mm/s (120.1 ft/min) | 560 mm/s (110.2 ft/min) |
| Lift Speed (unladen) | 650 mm/s (128.0 ft/min) | 580 mm/s (114.2 ft/min) |
| Lowering Speed (laden) | 580 mm/s (114.2 ft/min) | 580 mm/s (114.2 ft/min) |
| Gradeability (laden) | 30.0% | 22.2% |
| Drawbar Pull (laden) | 15,917 N (3,578 lbf) | 7,600 N (1,709 lbf) |
| Tyres, Brakes & Chassis | ||
| Tyre Type | Solid Pneumatic | Solid Pneumatic |
| Front Tyre Size | 7.00 x 12 | 250/75-12 (27 x 10-12) |
| Rear Tyre Size | 6.00 x 9 | 6.50-10 |
| Wheels (front / rear) | 2x / 2 | 2x / 2 |
| Service Brake | Hydraulic, drum | Hydraulic / mechanical |
| Operator Position | Seated | Seated |
| General | ||
| Noise Level at Operator Ear | 78 dB(A) | Not specified |
| Warranty | 24 months / 4,000 hours (manufacturer standard) | Not specified |
What the numbers say
This is a cross-brand comparison: Hyster H2.0A (A Series), Linde X20/600 (X Series 1252).
Hyster H2.0A: 2,000 kg (at 500 mm load centre); Linde X20/600: 2,000 kg (at 600 mm load centre). Load centres differ or are not specified; these capacity ratings are not directly comparable and do not establish a capacity winner. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
For racking, the Hyster H2.0A reaches 3,900 mm while the Linde X20/600 tops out at 3,095 mm, a difference of 805 mm.
Frequently asked questions
How do the lift heights of the Hyster H2.0A and Linde X20/600 compare?
Hyster H2.0A: 3,900 mm. Linde X20/600: 3,095 mm.
How do the turning radii of the Hyster H2.0A and Linde X20/600 compare?
Hyster H2.0A: 2,191 mm. Linde X20/600: 2,352 mm.
How do the operating weights of the Hyster H2.0A and Linde X20/600 compare?
Hyster H2.0A: 3,613 kg. Linde X20/600: 4,837 kg.
What is the main difference between the Hyster H2.0A and Linde X20/600?
The Hyster H2.0A offers 11.8 kW more engine / motor power than the Linde X20/600. The Hyster H2.0A offers 805 mm more maximum lift height than the Linde X20/600. The Hyster H2.0A offers 96 mm less overall width than the Linde X20/600.
Do the Hyster H2.0A and Linde X20/600 use the same fuel type?
No. Hyster H2.0A: Diesel. Linde X20/600: Electric.