Hyster J2.2A vs Linde X20/600
Key differences
- Engine / Motor Power. The Linde X20/600 offers 6.8 kW more engine / motor power than the Hyster J2.2A.
- Outside Turning Radius. The Hyster J2.2A offers 394 mm less outside turning radius than the Linde X20/600.
- Maximum Lift Height. The Hyster J2.2A offers 276 mm more maximum lift height than the Linde X20/600.
- Overall Width. The Hyster J2.2A offers 71 mm less overall width than the Linde X20/600.
- Gradeability (laden). The Linde X20/600 offers 9.2% more gradeability (laden) than the Hyster J2.2A.
- Free Lift. The Linde X20/600 offers 50 mm more free lift than the Hyster J2.2A.
On maximum lift height, Hyster J2.2A leads with the higher figure at 3,371 mm versus 3,095 mm for Linde X20/600. The measured gap is 276 mm, or 8.9% relative to the latter published value.
Linde X20/600 leads with the higher figure on travel speed (laden): its published 22.0 km/h compares with 18.0 km/h for Hyster J2.2A. That is an absolute difference of 4.0 km/h (22.2% against the latter figure).
The lift speed (laden) figures separate Hyster J2.2A and Linde X20/600. Hyster J2.2A leads with the higher figure with 570 mm/s; Linde X20/600 records 560 mm/s, a gap of 10 mm/s or 1.8% of that second value.
On operating weight, Linde X20/600 has the higher published figure at 4,837 kg versus 4,531 kg for Hyster J2.2A. The measured gap is 306 kg, or 6.8% relative to the latter published value.
Hyster J2.2A leads with the lower figure on outside turning radius: its published 1,958 mm compares with 2,352 mm for Linde X20/600. That is an absolute difference of 394 mm (16.8% against the latter figure).
The battery capacity figures separate Linde X20/600 and Hyster J2.2A. Linde X20/600 leads with the higher figure with 670 Ah; Hyster J2.2A records 560 Ah, a gap of 110 Ah or 19.6% of that second value.
Highlighted values lead on that specification. An arrow indicates whether a higher or lower figure is preferred.
| Specification | Hyster J2.2A | Linde X20/600 |
|---|---|---|
| Capacity & Load | ||
| Rated Lift Capacity | 2,000 kg (4,409 lb) (at 500 mm load centre) | 2,000 kg (4,409 lb) (at 600 mm load centre) |
| Load Centre | 500 mm (19.7 in) | 600 mm (23.6 in) |
| Maximum Lift Height | 3,371 mm (11.1 ft) | 3,095 mm (10.2 ft) |
| Free Lift | 100 mm (3.9 in) | 150 mm (5.9 in) |
| Mast & Forks | ||
| Mast Type | 2-stage limited free lift | Standard mast |
| Mast Height Lowered | 2,140 mm (7.0 ft) | 2,220 mm (7.3 ft) |
| Mast Height Extended | 4,480 mm (14.7 ft) | 3,852 mm (12.6 ft) |
| Mast Tilt Forward | 5deg | 5deg |
| Mast Tilt Backward | 5deg | 8deg |
| Fork Length | 1,000 mm (39.4 in) | 1,000 mm (39.4 in) |
| Fork Width | 100 mm (3.9 in) | 100 mm (3.9 in) |
| Fork Thickness | 40 mm (1.6 in) | 45 mm (1.8 in) |
| Fork Carriage Class | II A | 2A |
| Engine & Powertrain | ||
| Fuel Type | Electric | Electric |
| Power Source | Battery Electric | Battery Electric |
| Engine / Motor Power | 18.0 kW (24.1 hp) | 24.8 kW (33.3 hp) |
| Drive Motor Power | 9.0 kW (12.1 hp) | 12.4 kW (16.6 hp) |
| Lift Motor Power | 20.7 kW (27.8 hp) | 20.0 kW (26.8 hp) |
| Transmission | Induction drive control | Synchronous reluctance motors, stepless digital control |
| Battery & Fuel | ||
| Battery Voltage | 80 V | 90 V |
| Battery Capacity | 560 Ah | 670 Ah |
| Battery Energy | Not specified | 60.3 kWh |
| Battery Type | Lead-acid | Lithium-ion |
| Minimum Battery Weight | 1,480 kg (3,263 lb) | Not specified |
| Dimensions | ||
| Overall Length (with forks) | 3,371 mm (11.1 ft) | 3,671 mm (12.0 ft) |
| Length to Fork Face | 2,371 mm (7.8 ft) | 2,671 mm (8.8 ft) |
| Overall Width | 1,185 mm (46.7 in) | 1,256 mm (49.4 in) |
| Height to Overhead Guard | 2,193 mm (7.2 ft) | 2,225 mm (7.3 ft) |
| Wheelbase | 1,636 mm (64.4 in) | 1,835 mm (72.2 in) |
| Ground Clearance | 137 mm (5.4 in) | 173 mm (6.8 in) |
| Outside Turning Radius | 1,958 mm (77.1 in) | 2,352 mm (7.7 ft) |
| Right-Angle Stacking Aisle (incl. load) | 3,654 mm (12.0 ft) | 4,008 mm (13.1 ft) |
| Working Aisle (VDI 4.34), 1000x1200 Crossways | 3,654 mm (12.0 ft) | 4,008 mm (13.1 ft) |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise | 3,799 mm (12.5 ft) | 4,208 mm (13.8 ft) |
| Load Distance (x) | 424 mm (16.7 in) | 455 mm (17.9 in) |
| Internal Turning Radius (b13) | 123 mm (4.8 in) | 655 mm (25.8 in) |
| Weights | ||
| Operating Weight | 4,531 kg (9,989 lb) | 4,837 kg (10,664 lb) |
| Front Axle Load (laden) | 5,558 kg (12,253 lb) | 5,663 kg (12,485 lb) |
| Rear Axle Load (laden) | 973 kg (2,145 lb) | 1,174 kg (2,588 lb) |
| Performance | ||
| Travel Speed (laden) | 18.0 km/h (11.2 mph) | 22.0 km/h (13.7 mph) |
| Travel Speed (unladen) | 18.0 km/h (11.2 mph) | 22.0 km/h (13.7 mph) |
| Lift Speed (laden) | 570 mm/s (112.2 ft/min) | 560 mm/s (110.2 ft/min) |
| Lift Speed (unladen) | 630 mm/s (124.0 ft/min) | 580 mm/s (114.2 ft/min) |
| Lowering Speed (laden) | 680 mm/s (133.9 ft/min) | 580 mm/s (114.2 ft/min) |
| Gradeability (laden) | 13.0% | 22.2% |
| Drawbar Pull (laden) | 7,720 N (1,736 lbf) | 7,600 N (1,709 lbf) |
| Tyres, Brakes & Chassis | ||
| Tyre Type | Solid Pneumatic | Solid Pneumatic |
| Front Tyre Size | 23 x 9-10 | 250/75-12 (27 x 10-12) |
| Rear Tyre Size | 18 x 7-8 | 6.50-10 |
| Wheels (front / rear) | 2x / 2 | 2x / 2 |
| Service Brake | Hydraulic | Hydraulic / mechanical |
| Operator Position | Seated | Seated |
| General | ||
| Noise Level at Operator Ear | 67 dB(A) | Not specified |
| Warranty | 24 months / 4,000 hours (manufacturer standard) | Not specified |
What the numbers say
This is a cross-brand comparison: Hyster J2.2A (J-A Series), Linde X20/600 (X Series 1252).
Hyster J2.2A: 2,000 kg (at 500 mm load centre); Linde X20/600: 2,000 kg (at 600 mm load centre). Load centres differ or are not specified; these capacity ratings are not directly comparable and do not establish a capacity winner. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
For racking, the Hyster J2.2A reaches 3,371 mm while the Linde X20/600 tops out at 3,095 mm, a difference of 276 mm.
Frequently asked questions
How do the lift heights of the Hyster J2.2A and Linde X20/600 compare?
Hyster J2.2A: 3,371 mm. Linde X20/600: 3,095 mm.
How do the turning radii of the Hyster J2.2A and Linde X20/600 compare?
Hyster J2.2A: 1,958 mm. Linde X20/600: 2,352 mm.
How do the operating weights of the Hyster J2.2A and Linde X20/600 compare?
Hyster J2.2A: 4,531 kg. Linde X20/600: 4,837 kg.
What is the main difference between the Hyster J2.2A and Linde X20/600?
The Linde X20/600 offers 6.8 kW more engine / motor power than the Hyster J2.2A. The Hyster J2.2A offers 394 mm less outside turning radius than the Linde X20/600. The Hyster J2.2A offers 276 mm more maximum lift height than the Linde X20/600.