Hyster R1.6HD vs Linde X20/600
Key differences
- Maximum Lift Height. The Hyster R1.6HD offers 4,805 mm more maximum lift height than the Linde X20/600.
- Outside Turning Radius. The Hyster R1.6HD offers 634 mm less outside turning radius than the Linde X20/600.
- Rated Lift Capacity. The Linde X20/600 offers 400 kg more rated lift capacity than the Hyster R1.6HD. Hyster R1.6HD: 1,600 kg (at 600 mm load centre) · Linde X20/600: 2,000 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
- Free Lift. The Hyster R1.6HD offers 2,530 mm more free lift than the Linde X20/600.
- Ground Clearance. The Linde X20/600 offers 88 mm more ground clearance than the Hyster R1.6HD.
- Travel Speed (laden). The Linde X20/600 offers 11.0 km/h more travel speed (laden) than the Hyster R1.6HD.
On rated lift capacity, Linde X20/600 leads with the higher figure at 2,000 kg versus 1,600 kg for Hyster R1.6HD. The measured gap is 400 kg, or 25.0% relative to the latter published value. Hyster R1.6HD: 1,600 kg (at 600 mm load centre) · Linde X20/600: 2,000 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
Hyster R1.6HD leads with the higher figure on maximum lift height: its published 7,900 mm compares with 3,095 mm for Linde X20/600. That is an absolute difference of 4,805 mm (155.3% against the latter figure).
The travel speed (laden) figures separate Linde X20/600 and Hyster R1.6HD. Linde X20/600 leads with the higher figure with 22.0 km/h; Hyster R1.6HD records 11.0 km/h, a gap of 11.0 km/h or 100.0% of that second value.
On lift speed (laden), Linde X20/600 leads with the higher figure at 560 mm/s versus 420 mm/s for Hyster R1.6HD. The measured gap is 140 mm/s, or 33.3% relative to the latter published value.
Linde X20/600 has the higher published figure on operating weight: its published 4,837 kg compares with 4,224 kg for Hyster R1.6HD. That is an absolute difference of 613 kg (14.5% against the latter figure).
The outside turning radius figures separate Hyster R1.6HD and Linde X20/600. Hyster R1.6HD leads with the lower figure with 1,718 mm; Linde X20/600 records 2,352 mm, a gap of 634 mm or 27.0% of that second value.
Highlighted values lead on that specification. An arrow indicates whether a higher or lower figure is preferred.
| Specification | Hyster R1.6HD | Linde X20/600 |
|---|---|---|
| Capacity & Load | ||
| Rated Lift Capacity | 1,600 kg (3,527 lb) (at 600 mm load centre) | 2,000 kg (4,409 lb) (at 600 mm load centre) |
| Load Centre | 600 mm (23.6 in) | 600 mm (23.6 in) |
| Maximum Lift Height | 7,900 mm (25.9 ft) | 3,095 mm (10.2 ft) |
| Free Lift | 2,680 mm (8.8 ft) | 150 mm (5.9 in) |
| Mast & Forks | ||
| Mast Type | 3-stage full free lift | Standard mast |
| Mast Height Lowered | 3,227 mm (10.6 ft) | 2,220 mm (7.3 ft) |
| Mast Height Extended | 8,463 mm (27.8 ft) | 3,852 mm (12.6 ft) |
| Mast Tilt Forward | 2deg | 5deg |
| Mast Tilt Backward | 4deg | 8deg |
| Fork Length | 1,150 mm (45.3 in) | 1,000 mm (39.4 in) |
| Fork Width | 120 mm (4.7 in) | 100 mm (3.9 in) |
| Fork Thickness | 40 mm (1.6 in) | 45 mm (1.8 in) |
| Fork Carriage Class | II A | 2A |
| Engine & Powertrain | ||
| Fuel Type | Electric | Electric |
| Power Source | Electric (battery) | Battery Electric |
| Engine / Motor Power | Not specified | 24.8 kW (33.3 hp) |
| Drive Motor Power | 9.6 kW (12.9 hp) | 12.4 kW (16.6 hp) |
| Lift Motor Power | 14.0 kW (18.8 hp) | 20.0 kW (26.8 hp) |
| Transmission | Not specified | Synchronous reluctance motors, stepless digital control |
| Battery & Fuel | ||
| Battery Voltage | 48 V | 90 V |
| Battery Capacity | 700 Ah | 670 Ah |
| Battery Energy | Not specified | 60.3 kWh |
| Battery Type | Lead-acid | Lithium-ion |
| Minimum Battery Weight | 1,119 kg (2,467 lb) | Not specified |
| Dimensions | ||
| Overall Length (with forks) | 2,538 mm (8.3 ft) | 3,671 mm (12.0 ft) |
| Length to Fork Face | 1,388 mm (54.6 in) | 2,671 mm (8.8 ft) |
| Overall Width | 1,265 mm (49.8 in) | 1,256 mm (49.4 in) |
| Height to Overhead Guard | 2,175 mm (7.1 ft) | 2,225 mm (7.3 ft) |
| Wheelbase | 1,450 mm (57.1 in) | 1,835 mm (72.2 in) |
| Ground Clearance | 85 mm (3.3 in) | 173 mm (6.8 in) |
| Outside Turning Radius | 1,718 mm (67.6 in) | 2,352 mm (7.7 ft) |
| Right-Angle Stacking Aisle (incl. load) | 2,845 mm (9.3 ft) | 4,008 mm (13.1 ft) |
| Working Aisle (VDI 4.34), 1000x1200 Crossways | 2,845 mm (9.3 ft) | 4,008 mm (13.1 ft) |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise | 2,909 mm (9.5 ft) | 4,208 mm (13.8 ft) |
| Load Distance (x) | 293 mm (11.5 in) | 455 mm (17.9 in) |
| Internal Turning Radius (b13) | Not specified | 655 mm (25.8 in) |
| Weights | ||
| Operating Weight | 4,224 kg (9,312 lb) | 4,837 kg (10,664 lb) |
| Front Axle Load (laden) | 2,104 kg (4,639 lb) | 5,663 kg (12,485 lb) |
| Rear Axle Load (laden) | 3,720 kg (8,201 lb) | 1,174 kg (2,588 lb) |
| Performance | ||
| Travel Speed (laden) | 11.0 km/h (6.8 mph) | 22.0 km/h (13.7 mph) |
| Travel Speed (unladen) | 11.0 km/h (6.8 mph) | 22.0 km/h (13.7 mph) |
| Lift Speed (laden) | 420 mm/s (82.7 ft/min) | 560 mm/s (110.2 ft/min) |
| Lift Speed (unladen) | 730 mm/s (143.7 ft/min) | 580 mm/s (114.2 ft/min) |
| Lowering Speed (laden) | 550 mm/s (108.3 ft/min) | 580 mm/s (114.2 ft/min) |
| Gradeability (laden) | 12.0% | 22.2% |
| Drawbar Pull (laden) | Not specified | 7,600 N (1,709 lbf) |
| Tyres, Brakes & Chassis | ||
| Tyre Type | Vulkollan | Solid Pneumatic |
| Front Tyre Size | 343 x 140 | 250/75-12 (27 x 10-12) |
| Rear Tyre Size | 285 x 100 | 6.50-10 |
| Wheels (front / rear) | 1x / 2 | 2x / 2 |
| Service Brake | Electric | Hydraulic / mechanical |
| Operator Position | Seated | Seated |
| General | ||
| Noise Level at Operator Ear | 70 dB(A) | Not specified |
| Warranty | 24 months / 4,000 hours (manufacturer standard) | Not specified |
What the numbers say
This is a cross-brand comparison: Hyster R1.6HD (R Series (D435)), Linde X20/600 (X Series 1252).
Hyster R1.6HD: 1,600 kg (at 600 mm load centre); Linde X20/600: 2,000 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
The Linde X20/600 has the highest published rating at 2,000 kg, 25% more than the Hyster R1.6HD at 1,600 kg.
For racking, the Hyster R1.6HD reaches 7,900 mm while the Linde X20/600 tops out at 3,095 mm, a difference of 4,805 mm.
Per tonne of rated capacity the Linde X20/600 weighs 2,419 kg and the Hyster R1.6HD weighs 2,640 kg.
Frequently asked questions
How do the published lift capacity ratings of the Hyster R1.6HD and Linde X20/600 compare?
Hyster R1.6HD: 1,600 kg (at 600 mm load centre). Linde X20/600: 2,000 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
How do the lift heights of the Hyster R1.6HD and Linde X20/600 compare?
Hyster R1.6HD: 7,900 mm. Linde X20/600: 3,095 mm.
How do the turning radii of the Hyster R1.6HD and Linde X20/600 compare?
Hyster R1.6HD: 1,718 mm. Linde X20/600: 2,352 mm.
How do the operating weights of the Hyster R1.6HD and Linde X20/600 compare?
Hyster R1.6HD: 4,224 kg. Linde X20/600: 4,837 kg.
What is the main difference between the Hyster R1.6HD and Linde X20/600?
The Hyster R1.6HD offers 4,805 mm more maximum lift height than the Linde X20/600. The Hyster R1.6HD offers 634 mm less outside turning radius than the Linde X20/600. The Linde X20/600 offers 400 kg more rated lift capacity than the Hyster R1.6HD. Hyster R1.6HD: 1,600 kg (at 600 mm load centre) · Linde X20/600: 2,000 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.