Hyster H2.0FT vs Linde X20/600
Key differences
- Engine / Motor Power. The Hyster H2.0FT offers 9.1 kW more engine / motor power than the Linde X20/600.
- Outside Turning Radius. The Hyster H2.0FT offers 203 mm less outside turning radius than the Linde X20/600.
- Overall Width. The Hyster H2.0FT offers 99 mm less overall width than the Linde X20/600.
- Drawbar Pull (laden). The Hyster H2.0FT offers 9,840 N more drawbar pull (laden) than the Linde X20/600.
- Operating Weight. These differ: Hyster H2.0FT 3,563 kg, Linde X20/600 4,837 kg.
- Travel Speed (laden). The Linde X20/600 offers 5.1 km/h more travel speed (laden) than the Hyster H2.0FT.
On maximum lift height, Hyster H2.0FT leads with the higher figure at 3,250 mm versus 3,095 mm for Linde X20/600. The measured gap is 155 mm, or 5.0% relative to the latter published value.
Linde X20/600 leads with the higher figure on travel speed (laden): its published 22.0 km/h compares with 16.9 km/h for Hyster H2.0FT. That is an absolute difference of 5.1 km/h (30.2% against the latter figure).
The lift speed (laden) figures separate Hyster H2.0FT and Linde X20/600. Hyster H2.0FT leads with the higher figure with 660 mm/s; Linde X20/600 records 560 mm/s, a gap of 100 mm/s or 17.9% of that second value.
On operating weight, Linde X20/600 has the higher published figure at 4,837 kg versus 3,563 kg for Hyster H2.0FT. The measured gap is 1,274 kg, or 35.8% relative to the latter published value.
Hyster H2.0FT leads with the lower figure on outside turning radius: its published 2,149 mm compares with 2,352 mm for Linde X20/600. That is an absolute difference of 203 mm (8.6% against the latter figure).
The engine / motor power figures separate Hyster H2.0FT and Linde X20/600. Hyster H2.0FT leads with the higher figure with 33.9 kW; Linde X20/600 records 24.8 kW, a gap of 9.1 kW or 36.7% of that second value.
Highlighted values lead on that specification. An arrow indicates whether a higher or lower figure is preferred.
| Specification | Hyster H2.0FT | Linde X20/600 |
|---|---|---|
| Capacity & Load | ||
| Rated Lift Capacity | 2,000 kg (4,409 lb) (at 500 mm load centre) | 2,000 kg (4,409 lb) (at 600 mm load centre) |
| Load Centre | 500 mm (19.7 in) | 600 mm (23.6 in) |
| Maximum Lift Height | 3,250 mm (10.7 ft) | 3,095 mm (10.2 ft) |
| Free Lift | 140 mm (5.5 in) | 150 mm (5.9 in) |
| Mast & Forks | ||
| Mast Type | 2-stage limited free lift | Standard mast |
| Mast Height Lowered | 2,170 mm (7.1 ft) | 2,220 mm (7.3 ft) |
| Mast Height Extended | 3,900 mm (12.8 ft) | 3,852 mm (12.6 ft) |
| Mast Tilt Forward | 6deg | 5deg |
| Mast Tilt Backward | 5deg | 8deg |
| Fork Length | 1,000 mm (39.4 in) | 1,000 mm (39.4 in) |
| Fork Width | 100 mm (3.9 in) | 100 mm (3.9 in) |
| Fork Thickness | 40 mm (1.6 in) | 45 mm (1.8 in) |
| Fork Carriage Class | II A | 2A |
| Engine & Powertrain | ||
| Fuel Type | Diesel | Electric |
| Power Source | Internal Combustion | Battery Electric |
| Engine Manufacturer | Yanmar | Not specified |
| Engine Model | 4TNE92 (2.6 L) | Not specified |
| Engine / Motor Power | 33.9 kW (45.5 hp) | 24.8 kW (33.3 hp) |
| Engine Displacement | 2,659 cc | Not specified |
| Cylinders | 4 | Not specified |
| Drive Motor Power | Not specified | 12.4 kW (16.6 hp) |
| Lift Motor Power | Not specified | 20.0 kW (26.8 hp) |
| Transmission | Electronic Powershift, 1-speed | Synchronous reluctance motors, stepless digital control |
| Battery & Fuel | ||
| Battery Voltage | Not specified | 90 V |
| Battery Capacity | Not specified | 670 Ah |
| Battery Energy | Not specified | 60.3 kWh |
| Battery Type | Not specified | Lithium-ion |
| Fuel Tank Capacity | 52.8 L (13.9 gal) | Not specified |
| Dimensions | ||
| Overall Length (with forks) | 3,486 mm (11.4 ft) | 3,671 mm (12.0 ft) |
| Length to Fork Face | 2,486 mm (8.2 ft) | 2,671 mm (8.8 ft) |
| Overall Width | 1,157 mm (45.6 in) | 1,256 mm (49.4 in) |
| Height to Overhead Guard | 2,160 mm (7.1 ft) | 2,225 mm (7.3 ft) |
| Wheelbase | 1,623 mm (63.9 in) | 1,835 mm (72.2 in) |
| Ground Clearance | 160 mm (6.3 in) | 173 mm (6.8 in) |
| Outside Turning Radius | 2,149 mm (7.1 ft) | 2,352 mm (7.7 ft) |
| Right-Angle Stacking Aisle (incl. load) | 3,820 mm (12.5 ft) | 4,008 mm (13.1 ft) |
| Working Aisle (VDI 4.34), 1000x1200 Crossways | 3,820 mm (12.5 ft) | 4,008 mm (13.1 ft) |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise | 4,020 mm (13.2 ft) | 4,208 mm (13.8 ft) |
| Load Distance (x) | 471 mm (18.5 in) | 455 mm (17.9 in) |
| Internal Turning Radius (b13) | 629 mm (24.8 in) | 655 mm (25.8 in) |
| Weights | ||
| Operating Weight | 3,563 kg (7,855 lb) | 4,837 kg (10,664 lb) |
| Front Axle Load (laden) | 5,048 kg (11,129 lb) | 5,663 kg (12,485 lb) |
| Rear Axle Load (laden) | 516 kg (1,138 lb) | 1,174 kg (2,588 lb) |
| Performance | ||
| Travel Speed (laden) | 16.9 km/h (10.5 mph) | 22.0 km/h (13.7 mph) |
| Travel Speed (unladen) | 18.0 km/h (11.2 mph) | 22.0 km/h (13.7 mph) |
| Lift Speed (laden) | 660 mm/s (129.9 ft/min) | 560 mm/s (110.2 ft/min) |
| Lift Speed (unladen) | 710 mm/s (139.8 ft/min) | 580 mm/s (114.2 ft/min) |
| Lowering Speed (laden) | 580 mm/s (114.2 ft/min) | 580 mm/s (114.2 ft/min) |
| Gradeability (laden) | 21.3% | 22.2% |
| Drawbar Pull (laden) | 17,440 N (3,921 lbf) | 7,600 N (1,709 lbf) |
| Tyres, Brakes & Chassis | ||
| Tyre Type | Solid Pneumatic | Solid Pneumatic |
| Front Tyre Size | 7.00 x 12-12 | 250/75-12 (27 x 10-12) |
| Rear Tyre Size | 6.00 x 9 | 6.50-10 |
| Wheels (front / rear) | 2x / 2 | 2x / 2 |
| Service Brake | Hydraulic, drum | Hydraulic / mechanical |
| Operator Position | Seated | Seated |
| General | ||
| Noise Level at Operator Ear | 79 dB(A) | Not specified |
| Warranty | 24 months / 4,000 hours (manufacturer standard) | Not specified |
What the numbers say
This is a cross-brand comparison: Hyster H2.0FT (Fortens FT), Linde X20/600 (X Series 1252).
Hyster H2.0FT: 2,000 kg (at 500 mm load centre); Linde X20/600: 2,000 kg (at 600 mm load centre). Load centres differ or are not specified; these capacity ratings are not directly comparable and do not establish a capacity winner. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
For racking, the Hyster H2.0FT reaches 3,250 mm while the Linde X20/600 tops out at 3,095 mm, a difference of 155 mm.
Frequently asked questions
How do the lift heights of the Hyster H2.0FT and Linde X20/600 compare?
Hyster H2.0FT: 3,250 mm. Linde X20/600: 3,095 mm.
How do the turning radii of the Hyster H2.0FT and Linde X20/600 compare?
Hyster H2.0FT: 2,149 mm. Linde X20/600: 2,352 mm.
How do the operating weights of the Hyster H2.0FT and Linde X20/600 compare?
Hyster H2.0FT: 3,563 kg. Linde X20/600: 4,837 kg.
What is the main difference between the Hyster H2.0FT and Linde X20/600?
The Hyster H2.0FT offers 9.1 kW more engine / motor power than the Linde X20/600. The Hyster H2.0FT offers 203 mm less outside turning radius than the Linde X20/600. The Hyster H2.0FT offers 99 mm less overall width than the Linde X20/600.
Do the Hyster H2.0FT and Linde X20/600 use the same fuel type?
No. Hyster H2.0FT: Diesel. Linde X20/600: Electric.