Hyster Diesel Forklifts

Hyster H2.0FT Specifications

The Hyster H2.0FT has a capacity of 2,000 kg, a lift height of 3,250 mm and a weight of 3,563 kg, per the specification table below.

2.0 tonne diesel counterbalance forklift from the Hyster Fortens FT range. Figures are for the base Fortens configuration with Yanmar 2.6 L engine, 3,250 mm two-stage mast and 1,000 mm forks, as published in Hyster's 2018 technical guide.

83% Checked against source

Compare H2.0FT Build a comparison

Key specifications

Capacity
2,000 kg (4,409 lb)
Lift Height
3,250 mm (10.7 ft)
Fuel
Diesel
Power
33.9 kW (45.5 hp)
Width
1,157 mm (45.6 in)
Turning Radius
2,149 mm (7.1 ft)
Weight
3,563 kg (7,855 lb)

How the H2.0FT compares

At 2,000 kg the Hyster H2.0FT has the 14th highest rated capacity of the 15 diesel forklifts with a published figure in this database (range 2,000 kg to 5,500 kg). The Hyster H2.0FT in the Fortens FT range has a 3,250 mm lift height, the 6th highest of 15 in diesel forklifts, against a category median of 3,055 mm.

The Hyster H2.0FT weighs 1,782 kg per tonne of rated capacity, 14% above the category median of 1,561 kg.

The Hyster H2.0FT is one of 10 models listed in the Fortens FT range, which covers 2,000 kg to 5,500 kg. One rating up is the Hyster H2.5FT at 2,500 kg (+339 kg operating weight).

The Hyster H2.0FT is listed with a Yanmar 4TNE92 (2.6 L) engine rated at 33.9 kW, a 2-stage limited free lift mast, Solid Pneumatic, front 7.00 x 12-12, rear 6.00 x 9 tyres, a Electronic Powershift, 1-speed transmission, a seated operator position.

Hyster H2.0FT full specifications

Capacity & Load

Rated Lift Capacity ? 2,000 kg (4,409 lb)
Load Centre ? 500 mm (19.7 in)
Maximum Lift Height ? 3,250 mm (10.7 ft)
Capacity at Maximum Height ? Not specified
Free Lift ? 140 mm (5.5 in)

Mast & Forks

Mast Type 2-stage limited free lift
Mast Height Lowered ? 2,170 mm (7.1 ft)
Mast Height Extended 3,900 mm (12.8 ft)
Mast Tilt Forward 6deg
Mast Tilt Backward 5deg
Fork Length 1,000 mm (39.4 in)
Fork Width 100 mm (3.9 in)
Fork Thickness 40 mm (1.6 in)
Fork Carriage Class ? II A

Engine & Powertrain

Fuel Type Diesel
Power Source Internal Combustion
Engine Manufacturer Yanmar
Engine Model 4TNE92 (2.6 L)
Engine / Motor Power ? 33.9 kW (45.5 hp)
Engine Displacement 2,659 cc
Cylinders 4
Drive Motor Power Not specified
Lift Motor Power Not specified
Transmission Electronic Powershift, 1-speed

Battery & Fuel

Battery Voltage Not specified
Battery Capacity Not specified
Battery Energy ? Not specified
Battery Type Not specified
Minimum Battery Weight ? Not specified
Fuel Tank Capacity 52.8 L (13.9 gal)
LPG Cylinder Size Not specified

Dimensions

Overall Length (with forks) 3,486 mm (11.4 ft)
Length to Fork Face 2,486 mm (8.2 ft)
Overall Width ? 1,157 mm (45.6 in)
Overall Height Not specified
Height to Overhead Guard 2,160 mm (7.1 ft)
Wheelbase 1,623 mm (63.9 in)
Ground Clearance 160 mm (6.3 in)
Outside Turning Radius ? 2,149 mm (7.1 ft)
Right-Angle Stacking Aisle (incl. load) ? 3,820 mm (12.5 ft)
Right-Angle Stacking Aisle (excl. load) ? Not specified
Working Aisle (VDI 4.34), 1000x1200 Crossways ? 3,820 mm (12.5 ft)
Working Aisle (VDI 4.34), 800x1200 Lengthwise ? 4,020 mm (13.2 ft)
Load Distance (x) ? 471 mm (18.5 in)
Internal Turning Radius (b13) ? 629 mm (24.8 in)

Weights

Operating Weight ? 3,563 kg (7,855 lb)
Front Axle Load (laden) 5,048 kg (11,129 lb)
Rear Axle Load (laden) 516 kg (1,138 lb)

Performance

Travel Speed (laden) 16.9 km/h (10.5 mph)
Travel Speed (unladen) 18.0 km/h (11.2 mph)
Lift Speed (laden) 660 mm/s (129.9 ft/min)
Lift Speed (unladen) 710 mm/s (139.8 ft/min)
Lowering Speed (laden) 580 mm/s (114.2 ft/min)
Gradeability (laden) 21.3%
Drawbar Pull (laden) 17,440 N (3,921 lbf)

Tyres, Brakes & Chassis

Tyre Type Solid Pneumatic
Front Tyre Size 7.00 x 12-12
Rear Tyre Size 6.00 x 9
Wheels (front / rear) 2x / 2
Service Brake Hydraulic, drum
Steering Not specified
Operator Position Seated

General

Noise Level at Operator Ear 79 dB(A)
Ingress Protection Rating Not specified
Warranty 24 months / 4,000 hours (manufacturer standard)

Not published for this model

  • Battery Voltage
  • Battery Type
  • Capacity at Maximum Height
  • Drive Motor Power
  • Lift Motor Power
  • Battery Capacity

Alternatives from other manufacturers

Frequently asked questions

What is the lift capacity of the Hyster H2.0FT?

The Hyster H2.0FT has a rated lift capacity of 2,000 kg (4,409 lb) at a 500 mm (19.7 in) load centre, ranking 14th of 15 diesel forklifts with a published capacity.

How high does the Hyster H2.0FT lift?

The Hyster H2.0FT lifts to a maximum fork height of 3,250 mm (10.7 ft) with its standard mast.

What fuel does the Hyster H2.0FT use?

The Hyster H2.0FT is a diesel forklift, with a rated output of 33.9 kW (45.5 hp).

How much does the Hyster H2.0FT weigh?

The Hyster H2.0FT has an operating weight of 3,563 kg (7,855 lb).

What are the dimensions of the Hyster H2.0FT?

The Hyster H2.0FT measures overall length 3,486 mm (11.4 ft), overall width 1,157 mm (45.6 in), lowered mast height 2,170 mm (7.1 ft).

How much space does the Hyster H2.0FT need to turn?

The Hyster H2.0FT has an outside turning radius of 2,149 mm (7.1 ft) and a right-angle stacking aisle of 3,820 mm (12.5 ft).

What engine does the Hyster H2.0FT list?

The Hyster H2.0FT lists a Yanmar 4TNE92 (2.6 L) engine rated at 33.9 kW (45.5 hp).

What mast does the Hyster H2.0FT list?

The Hyster H2.0FT is listed with a 2-stage limited free lift mast.

What tyres does the Hyster H2.0FT list?

The Hyster H2.0FT is listed with Solid Pneumatic, front 7.00 x 12-12, rear 6.00 x 9 tyres.

Running cost

Running-cost calculators for the Hyster H2.0FT use figures you enter and this page does not publish a price.

Sources

Source recorded for the Hyster H2.0FT.