Hyster H2.5A6 vs Toyota 40-8FGU30
Key differences
- Maximum Lift Height. The Hyster H2.5A6 offers 555 mm more maximum lift height than the Toyota 40-8FGU30.
- Rated Lift Capacity. The Toyota 40-8FGU30 offers 200 kg more rated lift capacity than the Hyster H2.5A6. Hyster H2.5A6: 2,500 kg (at 600 mm load centre) · Toyota 40-8FGU30: 2,700 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
- Free Lift. The Toyota 40-8FGU30 offers 85 mm more free lift than the Hyster H2.5A6.
- Fuel Tank Capacity. The Toyota 40-8FGU30 offers 20.1 L more fuel tank capacity than the Hyster H2.5A6.
- Gradeability (laden). The Hyster H2.5A6 offers 8.0% more gradeability (laden) than the Toyota 40-8FGU30.
- Lift Speed (unladen). The Hyster H2.5A6 offers 130 mm/s more lift speed (unladen) than the Toyota 40-8FGU30.
On rated lift capacity, Toyota 40-8FGU30 leads with the higher figure at 2,700 kg versus 2,500 kg for Hyster H2.5A6. The measured gap is 200 kg, or 8.0% relative to the latter published value. Hyster H2.5A6: 2,500 kg (at 600 mm load centre) · Toyota 40-8FGU30: 2,700 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
Hyster H2.5A6 leads with the higher figure on maximum lift height: its published 3,900 mm compares with 3,345 mm for Toyota 40-8FGU30. That is an absolute difference of 555 mm (16.6% against the latter figure).
The travel speed (laden) figures separate Hyster H2.5A6 and Toyota 40-8FGU30. Hyster H2.5A6 leads with the higher figure with 18.5 km/h; Toyota 40-8FGU30 records 18.0 km/h, a gap of 0.5 km/h or 2.8% of that second value.
On lift speed (laden), Hyster H2.5A6 leads with the higher figure at 600 mm/s versus 500 mm/s for Toyota 40-8FGU30. The measured gap is 100 mm/s, or 20.0% relative to the latter published value.
Hyster H2.5A6 has the higher published figure on operating weight: its published 4,292 kg compares with 4,280 kg for Toyota 40-8FGU30. That is an absolute difference of 12 kg (0.3% against the latter figure).
The outside turning radius figures separate Hyster H2.5A6 and Toyota 40-8FGU30. Hyster H2.5A6 leads with the lower figure with 2,333 mm; Toyota 40-8FGU30 records 2,350 mm, a gap of 17 mm or 0.7% of that second value.
Highlighted values lead on that specification. An arrow indicates whether a higher or lower figure is preferred.
| Specification | Hyster H2.5A6 | Toyota 40-8FGU30 |
|---|---|---|
| Capacity & Load | ||
| Rated Lift Capacity | 2,500 kg (5,512 lb) (at 600 mm load centre) | 2,700 kg (5,952 lb) (at 600 mm load centre) |
| Load Centre | 600 mm (23.6 in) | 600 mm (23.6 in) |
| Maximum Lift Height | 3,900 mm (12.8 ft) | 3,345 mm (11.0 ft) |
| Free Lift | 50 mm (2.0 in) | 135 mm (5.3 in) |
| Mast & Forks | ||
| Mast Type | 2-stage limited free lift | Wide-view 2-stage (V) |
| Mast Height Lowered | 2,592 mm (8.5 ft) | 2,165 mm (7.1 ft) |
| Mast Height Extended | 4,500 mm (14.8 ft) | 4,565 mm (15.0 ft) |
| Mast Tilt Forward | 6deg | 6deg |
| Mast Tilt Backward | 6deg | 11deg |
| Fork Length | 1,000 mm (39.4 in) | 1,070 mm (42.1 in) |
| Fork Width | 120 mm (4.7 in) | 125 mm (4.9 in) |
| Fork Thickness | 50 mm (2.0 in) | 45 mm (1.8 in) |
| Fork Carriage Class | II A | Not specified |
| Engine & Powertrain | ||
| Fuel Type | Diesel | Dual Fuel LPG/Petrol |
| Power Source | Internal Combustion | Internal Combustion |
| Engine Manufacturer | Yanmar | Kubota |
| Engine Model | 4TNV86CHT (2.1 L) | WG2503 (2.5 L) |
| Engine / Motor Power | 44.0 kW (59.0 hp) | 44.0 kW (59.0 hp) |
| Engine Displacement | 2,091 cc | 2,491 cc |
| Cylinders | 4 | 4 |
| Transmission | Electronic Powershift, 1-speed | Powershift, 1 forward / 1 reverse |
| Battery & Fuel | ||
| Fuel Tank Capacity | 39.9 L (10.5 gal) | 60.0 L (15.9 gal) |
| Dimensions | ||
| Overall Length (with forks) | 3,714 mm (12.2 ft) | Not specified |
| Length to Fork Face | 2,676 mm (8.8 ft) | 2,780 mm (9.1 ft) |
| Overall Width | 1,186 mm (46.7 in) | 1,240 mm (48.8 in) |
| Height to Overhead Guard | 2,182 mm (7.2 ft) | 2,170 mm (7.1 ft) |
| Wheelbase | 1,700 mm (66.9 in) | 1,700 mm (66.9 in) |
| Ground Clearance | 182 mm (7.2 in) | 185 mm (7.3 in) |
| Outside Turning Radius | 2,333 mm (7.7 ft) | 2,350 mm (7.7 ft) |
| Right-Angle Stacking Aisle (incl. load) | 4,027 mm (13.2 ft) | Not specified |
| Right-Angle Stacking Aisle (excl. load) | Not specified | 2,835 mm (9.3 ft) |
| Working Aisle (VDI 4.34), 1000x1200 Crossways | 4,027 mm (13.2 ft) | Not specified |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise | 4,227 mm (13.9 ft) | Not specified |
| Load Distance (x) | 495 mm (19.5 in) | 485 mm (19.1 in) |
| Internal Turning Radius (b13) | 660 mm (26.0 in) | Not specified |
| Weights | ||
| Operating Weight | 4,292 kg (9,462 lb) | 4,280 kg (9,436 lb) |
| Front Axle Load (laden) | 5,900 kg (13,007 lb) | 6,330 kg (13,955 lb) |
| Rear Axle Load (laden) | 921 kg (2,030 lb) | 950 kg (2,094 lb) |
| Performance | ||
| Travel Speed (laden) | 18.5 km/h (11.5 mph) | 18.0 km/h (11.2 mph) |
| Travel Speed (unladen) | 18.7 km/h (11.6 mph) | 18.5 km/h (11.5 mph) |
| Lift Speed (laden) | 600 mm/s (118.1 ft/min) | 500 mm/s (98.4 ft/min) |
| Lift Speed (unladen) | 650 mm/s (128.0 ft/min) | 520 mm/s (102.4 ft/min) |
| Lowering Speed (laden) | 580 mm/s (114.2 ft/min) | 500 mm/s (98.4 ft/min) |
| Gradeability (laden) | 30.0% | 22.0% |
| Drawbar Pull (laden) | 19,314 N (4,342 lbf) | Not specified |
| Tyres, Brakes & Chassis | ||
| Tyre Type | Solid Pneumatic | Pneumatic |
| Front Tyre Size | 28 x 9-15 | 28 x 9-15-12PR |
| Rear Tyre Size | 6.5 x 10 | 6.50-10-10PR |
| Wheels (front / rear) | 2x / 2 | 2x / 2 |
| Service Brake | Hydraulic, drum | Hydraulic |
| Operator Position | Seated | Seated |
| General | ||
| Noise Level at Operator Ear | 79 dB(A) | Not specified |
| Warranty | 24 months / 4,000 hours (manufacturer standard) | Not specified |
What the numbers say
This is a cross-brand comparison: Hyster H2.5A6 (A Series), Toyota 40-8FGU30 (Core IC Pneumatic 8FGU).
Hyster H2.5A6: 2,500 kg (at 600 mm load centre); Toyota 40-8FGU30: 2,700 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
The Toyota 40-8FGU30 has the highest published rating at 2,700 kg, 8% more than the Hyster H2.5A6 at 2,500 kg.
For racking, the Hyster H2.5A6 reaches 3,900 mm while the Toyota 40-8FGU30 tops out at 3,345 mm, a difference of 555 mm.
Per tonne of rated capacity the Toyota 40-8FGU30 weighs 1,585 kg and the Hyster H2.5A6 weighs 1,717 kg.
Frequently asked questions
How do the published lift capacity ratings of the Hyster H2.5A6 and Toyota 40-8FGU30 compare?
Hyster H2.5A6: 2,500 kg (at 600 mm load centre). Toyota 40-8FGU30: 2,700 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
How do the lift heights of the Hyster H2.5A6 and Toyota 40-8FGU30 compare?
Hyster H2.5A6: 3,900 mm. Toyota 40-8FGU30: 3,345 mm.
How do the turning radii of the Hyster H2.5A6 and Toyota 40-8FGU30 compare?
Hyster H2.5A6: 2,333 mm. Toyota 40-8FGU30: 2,350 mm.
How do the operating weights of the Hyster H2.5A6 and Toyota 40-8FGU30 compare?
Hyster H2.5A6: 4,292 kg. Toyota 40-8FGU30: 4,280 kg.
What is the main difference between the Hyster H2.5A6 and Toyota 40-8FGU30?
The Hyster H2.5A6 offers 555 mm more maximum lift height than the Toyota 40-8FGU30. The Toyota 40-8FGU30 offers 200 kg more rated lift capacity than the Hyster H2.5A6. Hyster H2.5A6: 2,500 kg (at 600 mm load centre) · Toyota 40-8FGU30: 2,700 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck. The Toyota 40-8FGU30 offers 85 mm more free lift than the Hyster H2.5A6.
Do the Hyster H2.5A6 and Toyota 40-8FGU30 use the same fuel type?
No. Hyster H2.5A6: Diesel. Toyota 40-8FGU30: Dual Fuel LPG/Petrol.