Hyster P1.6 vs Linde X20/600
Key differences
- Maximum Lift Height. The Linde X20/600 offers 2,965 mm more maximum lift height than the Hyster P1.6.
- Overall Width. The Hyster P1.6 offers 544 mm less overall width than the Linde X20/600.
- Outside Turning Radius. The Hyster P1.6 offers 817 mm less outside turning radius than the Linde X20/600.
- Rated Lift Capacity. The Linde X20/600 offers 400 kg more rated lift capacity than the Hyster P1.6. Hyster P1.6: 1,600 kg (at 600 mm load centre) · Linde X20/600: 2,000 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
- Operating Weight. These differ: Hyster P1.6 545 kg, Linde X20/600 4,837 kg.
- Lift Motor Power. The Linde X20/600 offers 18.8 kW more lift motor power than the Hyster P1.6.
On rated lift capacity, Linde X20/600 leads with the higher figure at 2,000 kg versus 1,600 kg for Hyster P1.6. The measured gap is 400 kg, or 25.0% relative to the latter published value. Hyster P1.6: 1,600 kg (at 600 mm load centre) · Linde X20/600: 2,000 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
Linde X20/600 leads with the higher figure on maximum lift height: its published 3,095 mm compares with 130 mm for Hyster P1.6. That is an absolute difference of 2,965 mm (2,280.8% against the latter figure).
The travel speed (laden) figures separate Linde X20/600 and Hyster P1.6. Linde X20/600 leads with the higher figure with 22.0 km/h; Hyster P1.6 records 6.0 km/h, a gap of 16.0 km/h or 266.7% of that second value.
On lift speed (laden), Linde X20/600 leads with the higher figure at 560 mm/s versus 40 mm/s for Hyster P1.6. The measured gap is 520 mm/s, or 1,300.0% relative to the latter published value.
Linde X20/600 has the higher published figure on operating weight: its published 4,837 kg compares with 545 kg for Hyster P1.6. That is an absolute difference of 4,292 kg (787.5% against the latter figure).
The outside turning radius figures separate Hyster P1.6 and Linde X20/600. Hyster P1.6 leads with the lower figure with 1,535 mm; Linde X20/600 records 2,352 mm, a gap of 817 mm or 34.7% of that second value.
Highlighted values lead on that specification. An arrow indicates whether a higher or lower figure is preferred.
| Specification | Hyster P1.6 | Linde X20/600 |
|---|---|---|
| Capacity & Load | ||
| Rated Lift Capacity | 1,600 kg (3,527 lb) (at 600 mm load centre) | 2,000 kg (4,409 lb) (at 600 mm load centre) |
| Load Centre | 600 mm (23.6 in) | 600 mm (23.6 in) |
| Maximum Lift Height | 130 mm (5.1 in) | 3,095 mm (10.2 ft) |
| Free Lift | Not specified | 150 mm (5.9 in) |
| Mast & Forks | ||
| Mast Type | Not specified | Standard mast |
| Mast Height Lowered | Not specified | 2,220 mm (7.3 ft) |
| Mast Height Extended | Not specified | 3,852 mm (12.6 ft) |
| Mast Tilt Forward | Not specified | 5deg |
| Mast Tilt Backward | Not specified | 8deg |
| Fork Length | 1,156 mm (45.5 in) | 1,000 mm (39.4 in) |
| Fork Width | 172 mm (6.8 in) | 100 mm (3.9 in) |
| Fork Thickness | 64 mm (2.5 in) | 45 mm (1.8 in) |
| Fork Carriage Class | Not specified | 2A |
| Engine & Powertrain | ||
| Fuel Type | Electric | Electric |
| Power Source | Electric (battery) | Battery Electric |
| Engine / Motor Power | Not specified | 24.8 kW (33.3 hp) |
| Drive Motor Power | 1.3 kW (1.7 hp) | 12.4 kW (16.6 hp) |
| Lift Motor Power | 1.2 kW (1.6 hp) | 20.0 kW (26.8 hp) |
| Transmission | Not specified | Synchronous reluctance motors, stepless digital control |
| Battery & Fuel | ||
| Battery Voltage | 24 V | 90 V |
| Battery Capacity | 250 Ah | 670 Ah |
| Battery Energy | Not specified | 60.3 kWh |
| Battery Type | Lead-acid | Lithium-ion |
| Minimum Battery Weight | 212 kg (467 lb) | Not specified |
| Dimensions | ||
| Overall Length (with forks) | 1,734 mm (68.3 in) | 3,671 mm (12.0 ft) |
| Length to Fork Face | 578 mm (22.8 in) | 2,671 mm (8.8 ft) |
| Overall Width | 712 mm (28.0 in) | 1,256 mm (49.4 in) |
| Height to Overhead Guard | Not specified | 2,225 mm (7.3 ft) |
| Wheelbase | 1,368 mm (53.9 in) | 1,835 mm (72.2 in) |
| Ground Clearance | 21 mm (0.8 in) | 173 mm (6.8 in) |
| Outside Turning Radius | 1,535 mm (60.4 in) | 2,352 mm (7.7 ft) |
| Right-Angle Stacking Aisle (incl. load) | 2,337 mm (7.7 ft) | 4,008 mm (13.1 ft) |
| Working Aisle (VDI 4.34), 1000x1200 Crossways | 2,337 mm (7.7 ft) | 4,008 mm (13.1 ft) |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise | 2,204 mm (7.2 ft) | 4,208 mm (13.8 ft) |
| Load Distance (x) | 955 mm (37.6 in) | 455 mm (17.9 in) |
| Internal Turning Radius (b13) | Not specified | 655 mm (25.8 in) |
| Weights | ||
| Operating Weight | 545 kg (1,202 lb) | 4,837 kg (10,664 lb) |
| Front Axle Load (laden) | 841 kg (1,854 lb) | 5,663 kg (12,485 lb) |
| Rear Axle Load (laden) | 1,304 kg (2,875 lb) | 1,174 kg (2,588 lb) |
| Performance | ||
| Travel Speed (laden) | 6.0 km/h (3.7 mph) | 22.0 km/h (13.7 mph) |
| Travel Speed (unladen) | 6.0 km/h (3.7 mph) | 22.0 km/h (13.7 mph) |
| Lift Speed (laden) | 40 mm/s (7.9 ft/min) | 560 mm/s (110.2 ft/min) |
| Lift Speed (unladen) | 50 mm/s (9.8 ft/min) | 580 mm/s (114.2 ft/min) |
| Lowering Speed (laden) | 90 mm/s (17.7 ft/min) | 580 mm/s (114.2 ft/min) |
| Gradeability (laden) | 5.5% | 22.2% |
| Drawbar Pull (laden) | Not specified | 7,600 N (1,709 lbf) |
| Tyres, Brakes & Chassis | ||
| Tyre Type | Polyurethane | Solid Pneumatic |
| Front Tyre Size | 250 x 75 | 250/75-12 (27 x 10-12) |
| Rear Tyre Size | 85 x 110 | 6.50-10 |
| Wheels (front / rear) | 1x+2 / 2 | 2x / 2 |
| Service Brake | Electromagnetic | Hydraulic / mechanical |
| Operator Position | Pedestrian | Seated |
| General | ||
| Warranty | 24 months / 4,000 hours (manufacturer standard) | Not specified |
What the numbers say
This is a cross-brand comparison: Hyster P1.6 (P Series (A418)), Linde X20/600 (X Series 1252).
Hyster P1.6: 1,600 kg (at 600 mm load centre); Linde X20/600: 2,000 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
The Linde X20/600 has the highest published rating at 2,000 kg, 25% more than the Hyster P1.6 at 1,600 kg.
For racking, the Linde X20/600 reaches 3,095 mm while the Hyster P1.6 tops out at 130 mm, a difference of 2,965 mm.
Per tonne of rated capacity the Hyster P1.6 weighs 341 kg and the Linde X20/600 weighs 2,419 kg.
Frequently asked questions
How do the published lift capacity ratings of the Hyster P1.6 and Linde X20/600 compare?
Hyster P1.6: 1,600 kg (at 600 mm load centre). Linde X20/600: 2,000 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
How do the lift heights of the Hyster P1.6 and Linde X20/600 compare?
Hyster P1.6: 130 mm. Linde X20/600: 3,095 mm.
How do the turning radii of the Hyster P1.6 and Linde X20/600 compare?
Hyster P1.6: 1,535 mm. Linde X20/600: 2,352 mm.
How do the operating weights of the Hyster P1.6 and Linde X20/600 compare?
Hyster P1.6: 545 kg. Linde X20/600: 4,837 kg.
What is the main difference between the Hyster P1.6 and Linde X20/600?
The Linde X20/600 offers 2,965 mm more maximum lift height than the Hyster P1.6. The Hyster P1.6 offers 544 mm less overall width than the Linde X20/600. The Hyster P1.6 offers 817 mm less outside turning radius than the Linde X20/600.