Hyster P2.2 vs Linde X20/600
Key differences
- Maximum Lift Height. The Linde X20/600 offers 2,965 mm more maximum lift height than the Hyster P2.2.
- Overall Width. The Hyster P2.2 offers 544 mm less overall width than the Linde X20/600.
- Outside Turning Radius. The Hyster P2.2 offers 745 mm less outside turning radius than the Linde X20/600.
- Rated Lift Capacity. The Hyster P2.2 offers 200 kg more rated lift capacity than the Linde X20/600. Hyster P2.2: 2,200 kg (at 600 mm load centre) · Linde X20/600: 2,000 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
- Operating Weight. These differ: Hyster P2.2 632 kg, Linde X20/600 4,837 kg.
- Lift Motor Power. The Linde X20/600 offers 18.8 kW more lift motor power than the Hyster P2.2.
On rated lift capacity, Hyster P2.2 leads with the higher figure at 2,200 kg versus 2,000 kg for Linde X20/600. The measured gap is 200 kg, or 10.0% relative to the latter published value. Hyster P2.2: 2,200 kg (at 600 mm load centre) · Linde X20/600: 2,000 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
Linde X20/600 leads with the higher figure on maximum lift height: its published 3,095 mm compares with 130 mm for Hyster P2.2. That is an absolute difference of 2,965 mm (2,280.8% against the latter figure).
The travel speed (laden) figures separate Linde X20/600 and Hyster P2.2. Linde X20/600 leads with the higher figure with 22.0 km/h; Hyster P2.2 records 6.0 km/h, a gap of 16.0 km/h or 266.7% of that second value.
On lift speed (laden), Linde X20/600 leads with the higher figure at 560 mm/s versus 40 mm/s for Hyster P2.2. The measured gap is 520 mm/s, or 1,300.0% relative to the latter published value.
Linde X20/600 has the higher published figure on operating weight: its published 4,837 kg compares with 632 kg for Hyster P2.2. That is an absolute difference of 4,205 kg (665.3% against the latter figure).
The outside turning radius figures separate Hyster P2.2 and Linde X20/600. Hyster P2.2 leads with the lower figure with 1,607 mm; Linde X20/600 records 2,352 mm, a gap of 745 mm or 31.7% of that second value.
Highlighted values lead on that specification. An arrow indicates whether a higher or lower figure is preferred.
| Specification | Hyster P2.2 | Linde X20/600 |
|---|---|---|
| Capacity & Load | ||
| Rated Lift Capacity | 2,200 kg (4,850 lb) (at 600 mm load centre) | 2,000 kg (4,409 lb) (at 600 mm load centre) |
| Load Centre | 600 mm (23.6 in) | 600 mm (23.6 in) |
| Maximum Lift Height | 130 mm (5.1 in) | 3,095 mm (10.2 ft) |
| Free Lift | Not specified | 150 mm (5.9 in) |
| Mast & Forks | ||
| Mast Type | Not specified | Standard mast |
| Mast Height Lowered | Not specified | 2,220 mm (7.3 ft) |
| Mast Height Extended | Not specified | 3,852 mm (12.6 ft) |
| Mast Tilt Forward | Not specified | 5deg |
| Mast Tilt Backward | Not specified | 8deg |
| Fork Length | 1,156 mm (45.5 in) | 1,000 mm (39.4 in) |
| Fork Width | 172 mm (6.8 in) | 100 mm (3.9 in) |
| Fork Thickness | 64 mm (2.5 in) | 45 mm (1.8 in) |
| Fork Carriage Class | Not specified | 2A |
| Engine & Powertrain | ||
| Fuel Type | Electric | Electric |
| Power Source | Electric (battery) | Battery Electric |
| Engine / Motor Power | Not specified | 24.8 kW (33.3 hp) |
| Drive Motor Power | 1.3 kW (1.7 hp) | 12.4 kW (16.6 hp) |
| Lift Motor Power | 1.2 kW (1.6 hp) | 20.0 kW (26.8 hp) |
| Transmission | Not specified | Synchronous reluctance motors, stepless digital control |
| Battery & Fuel | ||
| Battery Voltage | 24 V | 90 V |
| Battery Capacity | 375 Ah | 670 Ah |
| Battery Energy | Not specified | 60.3 kWh |
| Battery Type | Lead-acid | Lithium-ion |
| Minimum Battery Weight | 288 kg (635 lb) | Not specified |
| Dimensions | ||
| Overall Length (with forks) | 1,806 mm (71.1 in) | 3,671 mm (12.0 ft) |
| Length to Fork Face | 650 mm (25.6 in) | 2,671 mm (8.8 ft) |
| Overall Width | 712 mm (28.0 in) | 1,256 mm (49.4 in) |
| Height to Overhead Guard | Not specified | 2,225 mm (7.3 ft) |
| Wheelbase | 1,440 mm (56.7 in) | 1,835 mm (72.2 in) |
| Ground Clearance | 21 mm (0.8 in) | 173 mm (6.8 in) |
| Outside Turning Radius | 1,607 mm (63.3 in) | 2,352 mm (7.7 ft) |
| Right-Angle Stacking Aisle (incl. load) | 2,409 mm (7.9 ft) | 4,008 mm (13.1 ft) |
| Working Aisle (VDI 4.34), 1000x1200 Crossways | 2,409 mm (7.9 ft) | 4,008 mm (13.1 ft) |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise | 2,276 mm (7.5 ft) | 4,208 mm (13.8 ft) |
| Load Distance (x) | 955 mm (37.6 in) | 455 mm (17.9 in) |
| Internal Turning Radius (b13) | Not specified | 655 mm (25.8 in) |
| Weights | ||
| Operating Weight | 632 kg (1,393 lb) | 4,837 kg (10,664 lb) |
| Front Axle Load (laden) | 1,032 kg (2,275 lb) | 5,663 kg (12,485 lb) |
| Rear Axle Load (laden) | 1,800 kg (3,968 lb) | 1,174 kg (2,588 lb) |
| Performance | ||
| Travel Speed (laden) | 6.0 km/h (3.7 mph) | 22.0 km/h (13.7 mph) |
| Travel Speed (unladen) | 6.0 km/h (3.7 mph) | 22.0 km/h (13.7 mph) |
| Lift Speed (laden) | 40 mm/s (7.9 ft/min) | 560 mm/s (110.2 ft/min) |
| Lift Speed (unladen) | 50 mm/s (9.8 ft/min) | 580 mm/s (114.2 ft/min) |
| Lowering Speed (laden) | 90 mm/s (17.7 ft/min) | 580 mm/s (114.2 ft/min) |
| Gradeability (laden) | 4.0% | 22.2% |
| Drawbar Pull (laden) | Not specified | 7,600 N (1,709 lbf) |
| Tyres, Brakes & Chassis | ||
| Tyre Type | Polyurethane | Solid Pneumatic |
| Front Tyre Size | 250 x 75 | 250/75-12 (27 x 10-12) |
| Rear Tyre Size | 85 x 110 | 6.50-10 |
| Wheels (front / rear) | 1x+2 / 2 | 2x / 2 |
| Service Brake | Electromagnetic | Hydraulic / mechanical |
| Operator Position | Pedestrian | Seated |
| General | ||
| Warranty | 24 months / 4,000 hours (manufacturer standard) | Not specified |
What the numbers say
This is a cross-brand comparison: Hyster P2.2 (P Series (A418)), Linde X20/600 (X Series 1252).
Hyster P2.2: 2,200 kg (at 600 mm load centre); Linde X20/600: 2,000 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
The Hyster P2.2 has the highest published rating at 2,200 kg, 10% more than the Linde X20/600 at 2,000 kg.
For racking, the Linde X20/600 reaches 3,095 mm while the Hyster P2.2 tops out at 130 mm, a difference of 2,965 mm.
Per tonne of rated capacity the Hyster P2.2 weighs 287 kg and the Linde X20/600 weighs 2,419 kg.
Frequently asked questions
How do the published lift capacity ratings of the Hyster P2.2 and Linde X20/600 compare?
Hyster P2.2: 2,200 kg (at 600 mm load centre). Linde X20/600: 2,000 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
How do the lift heights of the Hyster P2.2 and Linde X20/600 compare?
Hyster P2.2: 130 mm. Linde X20/600: 3,095 mm.
How do the turning radii of the Hyster P2.2 and Linde X20/600 compare?
Hyster P2.2: 1,607 mm. Linde X20/600: 2,352 mm.
How do the operating weights of the Hyster P2.2 and Linde X20/600 compare?
Hyster P2.2: 632 kg. Linde X20/600: 4,837 kg.
What is the main difference between the Hyster P2.2 and Linde X20/600?
The Linde X20/600 offers 2,965 mm more maximum lift height than the Hyster P2.2. The Hyster P2.2 offers 544 mm less overall width than the Linde X20/600. The Hyster P2.2 offers 745 mm less outside turning radius than the Linde X20/600.