Hyster Diesel Forklifts

Hyster H5.0FT

5.0 tonne diesel counterbalance forklift rated at a 600 mm load centre, from the Hyster Fortens FT range with Kubota 3.6 L engine. Figures are for the base powershift configuration with 2,740 mm two-stage mast and 1,200 mm forks, from Hyster's 2019 technical guide.

82% Checked against source

Compare H5.0FT Build a comparison

Key specifications

Capacity
5,000 kg (11,023 lb)
Lift Height
2,740 mm (9.0 ft)
Fuel
Diesel
Power
57.0 kW (76.4 hp)
Width
1,450 mm (57.1 in)
Turning Radius
2,877 mm (9.4 ft)
Weight
7,520 kg (16,579 lb)

Hyster H5.0FT full specifications

Capacity & Load

Rated Lift Capacity ? 5,000 kg (11,023 lb)
Load Centre ? 600 mm (23.6 in)
Maximum Lift Height ? 2,740 mm (9.0 ft)
Capacity at Maximum Height ? Not specified
Free Lift ? 100 mm (3.9 in)

Mast & Forks

Mast Type 2-stage limited free lift
Mast Height Lowered ? 2,215 mm (7.3 ft)
Mast Height Extended 3,730 mm (12.2 ft)
Mast Tilt Forward 6deg
Mast Tilt Backward 10deg
Fork Length 1,200 mm (47.2 in)
Fork Width 150 mm (5.9 in)
Fork Thickness 60 mm (2.4 in)
Fork Carriage Class ? IV A

Engine & Powertrain

Fuel Type Diesel
Power Source Internal Combustion
Engine Manufacturer Kubota
Engine Model V3600 IDI-T (3.6 L)
Engine / Motor Power ? 57.0 kW (76.4 hp)
Engine Displacement 3,620 cc
Cylinders 4
Drive Motor Power Not specified
Lift Motor Power Not specified
Transmission Electronic Powershift, 1-speed

Battery & Fuel

Battery Voltage Not specified
Battery Capacity Not specified
Battery Energy ? Not specified
Battery Type Not specified
Minimum Battery Weight ? Not specified
Fuel Tank Capacity 100.3 L (26.5 gal)
LPG Cylinder Size Not specified

Dimensions

Overall Length (with forks) 4,500 mm (14.8 ft)
Length to Fork Face 3,300 mm (10.8 ft)
Overall Width ? 1,450 mm (57.1 in)
Overall Height Not specified
Height to Overhead Guard 2,300 mm (7.5 ft)
Wheelbase 2,100 mm (6.9 ft)
Ground Clearance 237 mm (9.3 in)
Outside Turning Radius ? 2,877 mm (9.4 ft)
Right-Angle Stacking Aisle (incl. load) ? 4,868 mm (16.0 ft)
Right-Angle Stacking Aisle (excl. load) ? Not specified

Weights

Operating Weight ? 7,520 kg (16,579 lb)
Front Axle Load (laden) 11,014 kg (24,282 lb)
Rear Axle Load (laden) 1,478 kg (3,258 lb)

Performance

Travel Speed (laden) 16.5 km/h (10.3 mph)
Travel Speed (unladen) 17.6 km/h (10.9 mph)
Lift Speed (laden) 450 mm/s (88.6 ft/min)
Lift Speed (unladen) 490 mm/s (96.5 ft/min)
Lowering Speed (laden) 510 mm/s (100.4 ft/min)
Gradeability (laden) 23.6%
Drawbar Pull (laden) 27,776 N (6,244 lbf)

Tyres, Brakes & Chassis

Tyre Type Solid Pneumatic
Front Tyre Size 300 x 15
Rear Tyre Size 28 x 9-15
Wheels (front / rear) 2x / 2
Service Brake Hydraulic, oil-immersed
Steering Not specified
Operator Position Seated

General

Noise Level at Operator Ear 81 dB(A)
Ingress Protection Rating Not specified
Warranty Not specified

Not published for this model

We only publish figures we can source. These specifications are not in the documents we hold for this machine:

  • Battery Voltage
  • Battery Type
  • Capacity at Maximum Height
  • Drive Motor Power
  • Lift Motor Power
  • Battery Capacity

Ask the dealer for the full specification sheet if one of these matters to your decision.

Alternatives from other manufacturers

Machines in the same capacity class, from a different brand.

Frequently asked questions

What is the lift capacity of the Hyster H5.0FT?

The Hyster H5.0FT has a rated lift capacity of 5,000 kg (11,023 lb) at a 600 mm (23.6 in) load centre.

How high does the Hyster H5.0FT lift?

The Hyster H5.0FT lifts to a maximum fork height of 2,740 mm (9.0 ft) with its standard mast.

What fuel does the Hyster H5.0FT use?

The Hyster H5.0FT is a diesel forklift. Rated output is 57.0 kW (76.4 hp).

How much does the Hyster H5.0FT weigh?

The Hyster H5.0FT has an operating weight of 7,520 kg (16,579 lb). Check this against your floor loading limits and any trailer or lift you plan to move it on.

What are the dimensions of the Hyster H5.0FT?

The Hyster H5.0FT measures overall length 4,500 mm (14.8 ft), overall width 1,450 mm (57.1 in), lowered mast height 2,215 mm (7.3 ft).

How much space does the Hyster H5.0FT need to turn?

The Hyster H5.0FT has an outside turning radius of 2,877 mm (9.4 ft) and a right-angle stacking aisle of 4,868 mm (16.0 ft).

Work out what it costs to run

Sources

Where the specifications on this page came from.