Hyster H5.0FT vs Linde X35
Key differences
- Engine / Motor Power. The Hyster H5.0FT offers 32.2 kW more engine / motor power than the Linde X35.
- Outside Turning Radius. The Linde X35 offers 483 mm less outside turning radius than the Hyster H5.0FT.
- Overall Width. The Linde X35 offers 94 mm less overall width than the Hyster H5.0FT.
- Drawbar Pull (laden). The Hyster H5.0FT offers 20,176 N more drawbar pull (laden) than the Linde X35.
- Operating Weight. These differ: Hyster H5.0FT 7,520 kg, Linde X35 5,536 kg.
- Free Lift. The Linde X35 offers 50 mm more free lift than the Hyster H5.0FT.
Hyster H5.0FT: 5,000 kg (at 600 mm load centre) ยท Linde X35: 3,500 kg (at 500 mm load centre). Load centres differ or are not specified; these capacity ratings are not directly comparable and do not establish a capacity winner. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
Linde X35 leads with the higher figure on travel speed (laden): its published 22.0 km/h compares with 16.5 km/h for Hyster H5.0FT. That is an absolute difference of 5.5 km/h (33.3% against the latter figure).
The lift speed (laden) figures separate Linde X35 and Hyster H5.0FT. Linde X35 leads with the higher figure with 540 mm/s; Hyster H5.0FT records 450 mm/s, a gap of 90 mm/s or 20.0% of that second value.
On operating weight, Hyster H5.0FT has the higher published figure at 7,520 kg versus 5,536 kg for Linde X35. The measured gap is 1,984 kg, or 35.8% relative to the latter published value.
Linde X35 leads with the lower figure on outside turning radius: its published 2,394 mm compares with 2,877 mm for Hyster H5.0FT. That is an absolute difference of 483 mm (16.8% against the latter figure).
The engine / motor power figures separate Hyster H5.0FT and Linde X35. Hyster H5.0FT leads with the higher figure with 57.0 kW; Linde X35 records 24.8 kW, a gap of 32.2 kW or 129.8% of that second value.
Highlighted values lead on that specification. An arrow indicates whether a higher or lower figure is preferred.
| Specification | Hyster H5.0FT | Linde X35 |
|---|---|---|
| Capacity & Load | ||
| Rated Lift Capacity | 5,000 kg (11,023 lb) (at 600 mm load centre) | 3,500 kg (7,716 lb) (at 500 mm load centre) |
| Load Centre | 600 mm (23.6 in) | 500 mm (19.7 in) |
| Maximum Lift Height | 2,740 mm (9.0 ft) | Not specified |
| Free Lift | 100 mm (3.9 in) | 150 mm (5.9 in) |
| Mast & Forks | ||
| Mast Type | 2-stage limited free lift | Standard mast |
| Mast Height Lowered | 2,215 mm (7.3 ft) | 2,224 mm (7.3 ft) |
| Mast Height Extended | 3,730 mm (12.2 ft) | 3,856 mm (12.7 ft) |
| Mast Tilt Forward | 6deg | 5deg |
| Mast Tilt Backward | 10deg | 8deg |
| Fork Length | 1,200 mm (47.2 in) | 1,000 mm (39.4 in) |
| Fork Width | 150 mm (5.9 in) | 120 mm (4.7 in) |
| Fork Thickness | 60 mm (2.4 in) | 50 mm (2.0 in) |
| Fork Carriage Class | IV A | 3A |
| Engine & Powertrain | ||
| Fuel Type | Diesel | Electric |
| Power Source | Internal Combustion | Battery Electric |
| Engine Manufacturer | Kubota | Not specified |
| Engine Model | V3600 IDI-T (3.6 L) | Not specified |
| Engine / Motor Power | 57.0 kW (76.4 hp) | 24.8 kW (33.3 hp) |
| Engine Displacement | 3,620 cc | Not specified |
| Cylinders | 4 | Not specified |
| Drive Motor Power | Not specified | 12.4 kW (16.6 hp) |
| Lift Motor Power | Not specified | 20.0 kW (26.8 hp) |
| Transmission | Electronic Powershift, 1-speed | Synchronous reluctance motors, stepless digital control |
| Battery & Fuel | ||
| Battery Voltage | Not specified | 90 V |
| Battery Capacity | Not specified | 670 Ah |
| Battery Energy | Not specified | 60.3 kWh |
| Battery Type | Not specified | Lithium-ion |
| Fuel Tank Capacity | 100.3 L (26.5 gal) | Not specified |
| Dimensions | ||
| Overall Length (with forks) | 4,500 mm (14.8 ft) | 3,709 mm (12.2 ft) |
| Length to Fork Face | 3,300 mm (10.8 ft) | 2,709 mm (8.9 ft) |
| Overall Width | 1,450 mm (57.1 in) | 1,356 mm (53.4 in) |
| Height to Overhead Guard | 2,300 mm (7.5 ft) | 2,225 mm (7.3 ft) |
| Wheelbase | 2,100 mm (6.9 ft) | 1,875 mm (73.8 in) |
| Ground Clearance | 237 mm (9.3 in) | 180 mm (7.1 in) |
| Outside Turning Radius | 2,877 mm (9.4 ft) | 2,394 mm (7.9 ft) |
| Right-Angle Stacking Aisle (incl. load) | 4,868 mm (16.0 ft) | 4,048 mm (13.3 ft) |
| Working Aisle (VDI 4.34), 1000x1200 Crossways | 4,868 mm (16.0 ft) | 4,048 mm (13.3 ft) |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise | Not specified | 4,248 mm (13.9 ft) |
| Load Distance (x) | 591 mm (23.3 in) | 453 mm (17.8 in) |
| Internal Turning Radius (b13) | 800 mm (31.5 in) | 668 mm (26.3 in) |
| Weights | ||
| Operating Weight | 7,520 kg (16,579 lb) | 5,536 kg (12,205 lb) |
| Front Axle Load (laden) | 11,014 kg (24,282 lb) | 7,953 kg (17,533 lb) |
| Rear Axle Load (laden) | 1,478 kg (3,258 lb) | 1,083 kg (2,388 lb) |
| Performance | ||
| Travel Speed (laden) | 16.5 km/h (10.3 mph) | 22.0 km/h (13.7 mph) |
| Travel Speed (unladen) | 17.6 km/h (10.9 mph) | 22.0 km/h (13.7 mph) |
| Lift Speed (laden) | 450 mm/s (88.6 ft/min) | 540 mm/s (106.3 ft/min) |
| Lift Speed (unladen) | 490 mm/s (96.5 ft/min) | 580 mm/s (114.2 ft/min) |
| Lowering Speed (laden) | 510 mm/s (100.4 ft/min) | 580 mm/s (114.2 ft/min) |
| Gradeability (laden) | 23.6% | 17.6% |
| Drawbar Pull (laden) | 27,776 N (6,244 lbf) | 7,600 N (1,709 lbf) |
| Tyres, Brakes & Chassis | ||
| Tyre Type | Solid Pneumatic | Solid Pneumatic |
| Front Tyre Size | 300 x 15 | 355/45-15 (28 x 12.5-15) |
| Rear Tyre Size | 28 x 9-15 | 225/75-10 (23 x 9-10) |
| Wheels (front / rear) | 2x / 2 | 2x / 2 |
| Service Brake | Hydraulic, oil-immersed | Hydraulic / mechanical |
| Operator Position | Seated | Seated |
| General | ||
| Noise Level at Operator Ear | 81 dB(A) | Not specified |
What the numbers say
This is a cross-brand comparison: Hyster H5.0FT (Fortens FT), Linde X35 (X Series 1252).
Hyster H5.0FT: 5,000 kg (at 600 mm load centre); Linde X35: 3,500 kg (at 500 mm load centre). Load centres differ or are not specified; these capacity ratings are not directly comparable and do not establish a capacity winner. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
Frequently asked questions
How do the published lift capacity ratings of the Hyster H5.0FT and Linde X35 compare?
Hyster H5.0FT: 5,000 kg (at 600 mm load centre). Linde X35: 3,500 kg (at 500 mm load centre). Load centres differ or are not specified; these capacity ratings are not directly comparable and do not establish a capacity winner. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
How do the turning radii of the Hyster H5.0FT and Linde X35 compare?
Hyster H5.0FT: 2,877 mm. Linde X35: 2,394 mm.
How do the operating weights of the Hyster H5.0FT and Linde X35 compare?
Hyster H5.0FT: 7,520 kg. Linde X35: 5,536 kg.
What is the main difference between the Hyster H5.0FT and Linde X35?
The Hyster H5.0FT offers 32.2 kW more engine / motor power than the Linde X35. The Linde X35 offers 483 mm less outside turning radius than the Hyster H5.0FT. The Linde X35 offers 94 mm less overall width than the Hyster H5.0FT.
Do the Hyster H5.0FT and Linde X35 use the same fuel type?
No. Hyster H5.0FT: Diesel. Linde X35: Electric.