Hyster Diesel Forklifts

Hyster H5.5FT

5.5 tonne diesel counterbalance forklift rated at a 600 mm load centre, from the Hyster Fortens FT range with Kubota 3.6 L engine. Figures are for the base powershift configuration with 2,740 mm two-stage mast and 1,200 mm forks, from Hyster's 2019 technical guide.

82% Checked against source

Build a comparison

Key specifications

Capacity
5,500 kg (12,125 lb)
Lift Height
2,740 mm (9.0 ft)
Fuel
Diesel
Power
57.0 kW (76.4 hp)
Width
1,450 mm (57.1 in)
Turning Radius
2,915 mm (9.6 ft)
Weight
7,811 kg (17,220 lb)

Hyster H5.5FT full specifications

Capacity & Load

Rated Lift Capacity ? 5,500 kg (12,125 lb)
Load Centre ? 600 mm (23.6 in)
Maximum Lift Height ? 2,740 mm (9.0 ft)
Capacity at Maximum Height ? Not specified
Free Lift ? 100 mm (3.9 in)

Mast & Forks

Mast Type 2-stage limited free lift
Mast Height Lowered ? 2,215 mm (7.3 ft)
Mast Height Extended 3,730 mm (12.2 ft)
Mast Tilt Forward 6deg
Mast Tilt Backward 10deg
Fork Length 1,200 mm (47.2 in)
Fork Width 150 mm (5.9 in)
Fork Thickness 60 mm (2.4 in)
Fork Carriage Class ? IV A

Engine & Powertrain

Fuel Type Diesel
Power Source Internal Combustion
Engine Manufacturer Kubota
Engine Model V3600 IDI-T (3.6 L)
Engine / Motor Power ? 57.0 kW (76.4 hp)
Engine Displacement 3,620 cc
Cylinders 4
Drive Motor Power Not specified
Lift Motor Power Not specified
Transmission Electronic Powershift, 1-speed

Battery & Fuel

Battery Voltage Not specified
Battery Capacity Not specified
Battery Energy ? Not specified
Battery Type Not specified
Minimum Battery Weight ? Not specified
Fuel Tank Capacity 100.3 L (26.5 gal)
LPG Cylinder Size Not specified

Dimensions

Overall Length (with forks) 4,541 mm (14.9 ft)
Length to Fork Face 3,341 mm (11.0 ft)
Overall Width ? 1,450 mm (57.1 in)
Overall Height Not specified
Height to Overhead Guard 2,300 mm (7.5 ft)
Wheelbase 2,100 mm (6.9 ft)
Ground Clearance 237 mm (9.3 in)
Outside Turning Radius ? 2,915 mm (9.6 ft)
Right-Angle Stacking Aisle (incl. load) ? 4,906 mm (16.1 ft)
Right-Angle Stacking Aisle (excl. load) ? Not specified

Weights

Operating Weight ? 7,811 kg (17,220 lb)
Front Axle Load (laden) 11,754 kg (25,913 lb)
Rear Axle Load (laden) 1,558 kg (3,435 lb)

Performance

Travel Speed (laden) 16.2 km/h (10.1 mph)
Travel Speed (unladen) 17.5 km/h (10.9 mph)
Lift Speed (laden) 450 mm/s (88.6 ft/min)
Lift Speed (unladen) 490 mm/s (96.5 ft/min)
Lowering Speed (laden) 510 mm/s (100.4 ft/min)
Gradeability (laden) 22.0%
Drawbar Pull (laden) 27,620 N (6,209 lbf)

Tyres, Brakes & Chassis

Tyre Type Solid Pneumatic
Front Tyre Size 300 x 15
Rear Tyre Size 28 x 9-15
Wheels (front / rear) 2x / 2
Service Brake Hydraulic, oil-immersed
Steering Not specified
Operator Position Seated

General

Noise Level at Operator Ear 81 dB(A)
Ingress Protection Rating Not specified
Warranty Not specified

Not published for this model

We only publish figures we can source. These specifications are not in the documents we hold for this machine:

  • Battery Voltage
  • Battery Type
  • Capacity at Maximum Height
  • Drive Motor Power
  • Lift Motor Power
  • Battery Capacity

Ask the dealer for the full specification sheet if one of these matters to your decision.

Frequently asked questions

What is the lift capacity of the Hyster H5.5FT?

The Hyster H5.5FT has a rated lift capacity of 5,500 kg (12,125 lb) at a 600 mm (23.6 in) load centre.

How high does the Hyster H5.5FT lift?

The Hyster H5.5FT lifts to a maximum fork height of 2,740 mm (9.0 ft) with its standard mast.

What fuel does the Hyster H5.5FT use?

The Hyster H5.5FT is a diesel forklift. Rated output is 57.0 kW (76.4 hp).

How much does the Hyster H5.5FT weigh?

The Hyster H5.5FT has an operating weight of 7,811 kg (17,220 lb). Check this against your floor loading limits and any trailer or lift you plan to move it on.

What are the dimensions of the Hyster H5.5FT?

The Hyster H5.5FT measures overall length 4,541 mm (14.9 ft), overall width 1,450 mm (57.1 in), lowered mast height 2,215 mm (7.3 ft).

How much space does the Hyster H5.5FT need to turn?

The Hyster H5.5FT has an outside turning radius of 2,915 mm (9.6 ft) and a right-angle stacking aisle of 4,906 mm (16.1 ft).

Work out what it costs to run

Sources

Where the specifications on this page came from.