Hyster H3.0A vs Toyota 50-8FGU32
Key differences
- Maximum Lift Height. The Hyster H3.0A offers 535 mm more maximum lift height than the Toyota 50-8FGU32.
- Engine / Motor Power. The Hyster H3.0A offers 6.0 kW more engine / motor power than the Toyota 50-8FGU32.
- Free Lift. The Toyota 50-8FGU32 offers 85 mm more free lift than the Hyster H3.0A.
- Fuel Tank Capacity. The Toyota 50-8FGU32 offers 20.1 L more fuel tank capacity than the Hyster H3.0A.
- Operating Weight. These differ: Hyster H3.0A 4,642 kg, Toyota 50-8FGU32 4,320 kg.
- Mast Height Lowered. The Toyota 50-8FGU32 offers 527 mm less mast height lowered than the Hyster H3.0A.
On maximum lift height, Hyster H3.0A leads with the higher figure at 3,880 mm versus 3,345 mm for Toyota 50-8FGU32. The measured gap is 535 mm, or 16.0% relative to the latter published value.
Hyster H3.0A leads with the higher figure on travel speed (laden): its published 18.4 km/h compares with 18.0 km/h for Toyota 50-8FGU32. That is an absolute difference of 0.4 km/h (2.2% against the latter figure).
The lift speed (laden) figures separate Hyster H3.0A and Toyota 50-8FGU32. Hyster H3.0A leads with the higher figure with 560 mm/s; Toyota 50-8FGU32 records 510 mm/s, a gap of 50 mm/s or 9.8% of that second value.
On operating weight, Hyster H3.0A has the higher published figure at 4,642 kg versus 4,320 kg for Toyota 50-8FGU32. The measured gap is 322 kg, or 7.5% relative to the latter published value.
Toyota 50-8FGU32 leads with the lower figure on outside turning radius: its published 2,370 mm compares with 2,374 mm for Hyster H3.0A. That is an absolute difference of 4 mm (0.2% against the latter figure).
The engine / motor power figures separate Hyster H3.0A and Toyota 50-8FGU32. Hyster H3.0A leads with the higher figure with 44.0 kW; Toyota 50-8FGU32 records 38.0 kW, a gap of 6.0 kW or 15.8% of that second value.
Highlighted values lead on that specification. An arrow indicates whether a higher or lower figure is preferred.
| Specification | Hyster H3.0A | Toyota 50-8FGU32 |
|---|---|---|
| Capacity & Load | ||
| Rated Lift Capacity | 3,000 kg (6,614 lb) (at 500 mm load centre) | 3,000 kg (6,614 lb) (at 600 mm load centre) |
| Load Centre | 500 mm (19.7 in) | 600 mm (23.6 in) |
| Maximum Lift Height | 3,880 mm (12.7 ft) | 3,345 mm (11.0 ft) |
| Free Lift | 50 mm (2.0 in) | 135 mm (5.3 in) |
| Mast & Forks | ||
| Mast Type | 2-stage limited free lift | Wide-view 2-stage (V) |
| Mast Height Lowered | 2,692 mm (8.8 ft) | 2,165 mm (7.1 ft) |
| Mast Height Extended | 4,552 mm (14.9 ft) | 4,565 mm (15.0 ft) |
| Mast Tilt Forward | 6deg | 6deg |
| Mast Tilt Backward | 6deg | 11deg |
| Fork Length | 1,000 mm (39.4 in) | 1,070 mm (42.1 in) |
| Fork Width | 120 mm (4.7 in) | 125 mm (4.9 in) |
| Fork Thickness | 50 mm (2.0 in) | 45 mm (1.8 in) |
| Fork Carriage Class | III A | Not specified |
| Engine & Powertrain | ||
| Fuel Type | Diesel | LPG |
| Power Source | Internal Combustion | Internal Combustion |
| Engine Manufacturer | Yanmar | Toyota |
| Engine Model | 4TNV86CHT (2.1 L) | 4Y-US (2.2 L) |
| Engine / Motor Power | 44.0 kW (59.0 hp) | 38.0 kW (51.0 hp) |
| Engine Displacement | 2,091 cc | 2,237 cc |
| Cylinders | 4 | 4 |
| Transmission | Electronic Powershift, 1-speed | Powershift, 1 forward / 1 reverse |
| Battery & Fuel | ||
| Fuel Tank Capacity | 39.9 L (10.5 gal) | 60.0 L (15.9 gal) |
| Dimensions | ||
| Overall Length (with forks) | 3,746 mm (12.3 ft) | Not specified |
| Length to Fork Face | 2,731 mm (9.0 ft) | 2,800 mm (9.2 ft) |
| Overall Width | 1,186 mm (46.7 in) | 1,240 mm (48.8 in) |
| Height to Overhead Guard | 2,182 mm (7.2 ft) | 2,170 mm (7.1 ft) |
| Wheelbase | 1,700 mm (66.9 in) | 1,700 mm (66.9 in) |
| Ground Clearance | 182 mm (7.2 in) | 185 mm (7.3 in) |
| Outside Turning Radius | 2,374 mm (7.8 ft) | 2,370 mm (7.8 ft) |
| Right-Angle Stacking Aisle (incl. load) | 4,069 mm (13.3 ft) | Not specified |
| Right-Angle Stacking Aisle (excl. load) | Not specified | 2,855 mm (9.4 ft) |
| Working Aisle (VDI 4.34), 1000x1200 Crossways | 4,069 mm (13.3 ft) | Not specified |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise | 4,269 mm (14.0 ft) | Not specified |
| Load Distance (x) | 495 mm (19.5 in) | 485 mm (19.1 in) |
| Internal Turning Radius (b13) | 660 mm (26.0 in) | Not specified |
| Weights | ||
| Operating Weight | 4,642 kg (10,234 lb) | 4,320 kg (9,524 lb) |
| Front Axle Load (laden) | 6,635 kg (14,628 lb) | 6,670 kg (14,705 lb) |
| Rear Axle Load (laden) | 1,007 kg (2,220 lb) | 900 kg (1,984 lb) |
| Performance | ||
| Travel Speed (laden) | 18.4 km/h (11.4 mph) | 18.0 km/h (11.2 mph) |
| Travel Speed (unladen) | 18.6 km/h (11.6 mph) | 18.5 km/h (11.5 mph) |
| Lift Speed (laden) | 560 mm/s (110.2 ft/min) | 510 mm/s (100.4 ft/min) |
| Lift Speed (unladen) | 610 mm/s (120.1 ft/min) | 550 mm/s (108.3 ft/min) |
| Lowering Speed (laden) | 580 mm/s (114.2 ft/min) | 500 mm/s (98.4 ft/min) |
| Gradeability (laden) | 26.0% | 21.0% |
| Drawbar Pull (laden) | 19,160 N (4,307 lbf) | Not specified |
| Tyres, Brakes & Chassis | ||
| Tyre Type | Solid Pneumatic | Pneumatic |
| Front Tyre Size | 28 x 9-15 | 28 x 9-15-14PR |
| Rear Tyre Size | 6.5 x 10 | 6.50-10-10PR |
| Wheels (front / rear) | 2x / 2 | 2x / 2 |
| Service Brake | Hydraulic, drum | Hydraulic |
| Operator Position | Seated | Seated |
| General | ||
| Noise Level at Operator Ear | 79 dB(A) | Not specified |
| Warranty | 24 months / 4,000 hours (manufacturer standard) | Not specified |
What the numbers say
This is a cross-brand comparison: Hyster H3.0A (A Series), Toyota 50-8FGU32 (Core IC Pneumatic 8FGU).
Hyster H3.0A: 3,000 kg (at 500 mm load centre); Toyota 50-8FGU32: 3,000 kg (at 600 mm load centre). Load centres differ or are not specified; these capacity ratings are not directly comparable and do not establish a capacity winner. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
For racking, the Hyster H3.0A reaches 3,880 mm while the Toyota 50-8FGU32 tops out at 3,345 mm, a difference of 535 mm.
Frequently asked questions
How do the lift heights of the Hyster H3.0A and Toyota 50-8FGU32 compare?
Hyster H3.0A: 3,880 mm. Toyota 50-8FGU32: 3,345 mm.
How do the turning radii of the Hyster H3.0A and Toyota 50-8FGU32 compare?
Hyster H3.0A: 2,374 mm. Toyota 50-8FGU32: 2,370 mm.
How do the operating weights of the Hyster H3.0A and Toyota 50-8FGU32 compare?
Hyster H3.0A: 4,642 kg. Toyota 50-8FGU32: 4,320 kg.
What is the main difference between the Hyster H3.0A and Toyota 50-8FGU32?
The Hyster H3.0A offers 535 mm more maximum lift height than the Toyota 50-8FGU32. The Hyster H3.0A offers 6.0 kW more engine / motor power than the Toyota 50-8FGU32. The Toyota 50-8FGU32 offers 85 mm more free lift than the Hyster H3.0A.
Do the Hyster H3.0A and Toyota 50-8FGU32 use the same fuel type?
No. Hyster H3.0A: Diesel. Toyota 50-8FGU32: LPG.