Hyster H3.0A vs Linde X25
Key differences
- Engine / Motor Power. The Hyster H3.0A offers 19.2 kW more engine / motor power than the Linde X25.
- Maximum Lift Height. The Hyster H3.0A offers 785 mm more maximum lift height than the Linde X25.
- Rated Lift Capacity. The Hyster H3.0A offers 500 kg more rated lift capacity than the Linde X25.
- Overall Width. The Hyster H3.0A offers 70 mm less overall width than the Linde X25.
- Free Lift. The Linde X25 offers 100 mm more free lift than the Hyster H3.0A.
- Drawbar Pull (laden). The Hyster H3.0A offers 11,560 N more drawbar pull (laden) than the Linde X25.
On rated lift capacity, Hyster H3.0A leads with the higher figure at 3,000 kg versus 2,500 kg for Linde X25. The measured gap is 500 kg, or 20.0% relative to the latter published value.
Hyster H3.0A leads with the higher figure on maximum lift height: its published 3,880 mm compares with 3,095 mm for Linde X25. That is an absolute difference of 785 mm (25.4% against the latter figure).
The travel speed (laden) figures separate Linde X25 and Hyster H3.0A. Linde X25 leads with the higher figure with 22.0 km/h; Hyster H3.0A records 18.4 km/h, a gap of 3.6 km/h or 19.6% of that second value.
On lift speed (laden), Linde X25 leads with the higher figure at 570 mm/s versus 560 mm/s for Hyster H3.0A. The measured gap is 10 mm/s, or 1.8% relative to the latter published value.
Linde X25 has the higher published figure on operating weight: its published 4,837 kg compares with 4,642 kg for Hyster H3.0A. That is an absolute difference of 195 kg (4.2% against the latter figure).
The outside turning radius figures separate Linde X25 and Hyster H3.0A. Linde X25 leads with the lower figure with 2,352 mm; Hyster H3.0A records 2,374 mm, a gap of 22 mm or 0.9% of that second value.
Highlighted values lead on that specification. An arrow indicates whether a higher or lower figure is preferred.
| Specification | Hyster H3.0A | Linde X25 |
|---|---|---|
| Capacity & Load | ||
| Rated Lift Capacity | 3,000 kg (6,614 lb) | 2,500 kg (5,512 lb) |
| Load Centre | 500 mm (19.7 in) | 500 mm (19.7 in) |
| Maximum Lift Height | 3,880 mm (12.7 ft) | 3,095 mm (10.2 ft) |
| Free Lift | 50 mm (2.0 in) | 150 mm (5.9 in) |
| Mast & Forks | ||
| Mast Type | 2-stage limited free lift | Standard mast |
| Mast Height Lowered | 2,692 mm (8.8 ft) | 2,220 mm (7.3 ft) |
| Mast Height Extended | 4,552 mm (14.9 ft) | 3,852 mm (12.6 ft) |
| Mast Tilt Forward | 6deg | 5deg |
| Mast Tilt Backward | 6deg | 8deg |
| Fork Length | 1,000 mm (39.4 in) | 1,000 mm (39.4 in) |
| Fork Width | 120 mm (4.7 in) | 100 mm (3.9 in) |
| Fork Thickness | 50 mm (2.0 in) | 45 mm (1.8 in) |
| Fork Carriage Class | III A | 2A |
| Engine & Powertrain | ||
| Fuel Type | Diesel | Electric |
| Power Source | Internal Combustion | Battery Electric |
| Engine Manufacturer | Yanmar | Not specified |
| Engine Model | 4TNV86CHT (2.1 L) | Not specified |
| Engine / Motor Power | 44.0 kW (59.0 hp) | 24.8 kW (33.3 hp) |
| Engine Displacement | 2,091 cc | Not specified |
| Cylinders | 4 | Not specified |
| Drive Motor Power | Not specified | 12.4 kW (16.6 hp) |
| Lift Motor Power | Not specified | 20.0 kW (26.8 hp) |
| Transmission | Electronic Powershift, 1-speed | Synchronous reluctance motors, stepless digital control |
| Battery & Fuel | ||
| Battery Voltage | Not specified | 90 V |
| Battery Capacity | Not specified | 670 Ah |
| Battery Energy | Not specified | 60.3 kWh |
| Battery Type | Not specified | Lithium-ion |
| Fuel Tank Capacity | 39.9 L (10.5 gal) | Not specified |
| Dimensions | ||
| Overall Length (with forks) | 3,746 mm (12.3 ft) | 3,671 mm (12.0 ft) |
| Length to Fork Face | 2,731 mm (9.0 ft) | 2,671 mm (8.8 ft) |
| Overall Width | 1,186 mm (46.7 in) | 1,256 mm (49.4 in) |
| Height to Overhead Guard | 2,182 mm (7.2 ft) | 2,225 mm (7.3 ft) |
| Wheelbase | 1,700 mm (66.9 in) | 1,853 mm (73.0 in) |
| Ground Clearance | 182 mm (7.2 in) | 173 mm (6.8 in) |
| Outside Turning Radius | 2,374 mm (7.8 ft) | 2,352 mm (7.7 ft) |
| Right-Angle Stacking Aisle (incl. load) | 4,069 mm (13.3 ft) | 4,008 mm (13.1 ft) |
| Working Aisle (VDI 4.34), 1000x1200 Crossways | 4,069 mm (13.3 ft) | 4,008 mm (13.1 ft) |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise | 4,269 mm (14.0 ft) | 4,208 mm (13.8 ft) |
| Load Distance (x) | 495 mm (19.5 in) | 455 mm (17.9 in) |
| Internal Turning Radius (b13) | 660 mm (26.0 in) | 655 mm (25.8 in) |
| Weights | ||
| Operating Weight | 4,642 kg (10,234 lb) | 4,837 kg (10,664 lb) |
| Front Axle Load (laden) | 6,635 kg (14,628 lb) | 6,315 kg (13,922 lb) |
| Rear Axle Load (laden) | 1,007 kg (2,220 lb) | 1,022 kg (2,253 lb) |
| Performance | ||
| Travel Speed (laden) | 18.4 km/h (11.4 mph) | 22.0 km/h (13.7 mph) |
| Travel Speed (unladen) | 18.6 km/h (11.6 mph) | 22.0 km/h (13.7 mph) |
| Lift Speed (laden) | 560 mm/s (110.2 ft/min) | 570 mm/s (112.2 ft/min) |
| Lift Speed (unladen) | 610 mm/s (120.1 ft/min) | 580 mm/s (114.2 ft/min) |
| Lowering Speed (laden) | 580 mm/s (114.2 ft/min) | 580 mm/s (114.2 ft/min) |
| Gradeability (laden) | 26.0% | 20.5% |
| Drawbar Pull (laden) | 19,160 N (4,307 lbf) | 7,600 N (1,709 lbf) |
| Tyres, Brakes & Chassis | ||
| Tyre Type | Solid Pneumatic | Solid Pneumatic |
| Front Tyre Size | 28 x 9-15 | 250/75-12 (27 x 10-12) |
| Rear Tyre Size | 6.5 x 10 | 6.50-10 |
| Wheels (front / rear) | 2x / 2 | 2x / 2 |
| Service Brake | Hydraulic, drum | Hydraulic / mechanical |
| Operator Position | Seated | Seated |
| General | ||
| Noise Level at Operator Ear | 79 dB(A) | Not specified |
| Warranty | 24 months / 4,000 hours (manufacturer standard) | Not specified |
What the numbers say
This is a cross-brand comparison: Hyster H3.0A (A Series), Linde X25 (X Series 1252).
The Hyster H3.0A carries the most at 3,000 kg, 20% more than the Linde X25 at 2,500 kg.
For racking, the Hyster H3.0A reaches 3,880 mm while the Linde X25 tops out at 3,095 mm, a difference of 785 mm.
Per tonne of rated capacity the Hyster H3.0A weighs 1,547 kg and the Linde X25 weighs 1,935 kg.
Frequently asked questions
Which has the higher lift capacity, the Hyster H3.0A and Linde X25?
Hyster H3.0A: 3,000 kg. Linde X25: 2,500 kg.
How do the lift heights of the Hyster H3.0A and Linde X25 compare?
Hyster H3.0A: 3,880 mm. Linde X25: 3,095 mm.
How do the turning radii of the Hyster H3.0A and Linde X25 compare?
Hyster H3.0A: 2,374 mm. Linde X25: 2,352 mm.
How do the operating weights of the Hyster H3.0A and Linde X25 compare?
Hyster H3.0A: 4,642 kg. Linde X25: 4,837 kg.
What is the main difference between the Hyster H3.0A and Linde X25?
The Hyster H3.0A offers 19.2 kW more engine / motor power than the Linde X25. The Hyster H3.0A offers 785 mm more maximum lift height than the Linde X25. The Hyster H3.0A offers 500 kg more rated lift capacity than the Linde X25.
Do the Hyster H3.0A and Linde X25 use the same fuel type?
No. Hyster H3.0A: Diesel. Linde X25: Electric.