Hyster J3.0A vs Linde X25
Key differences
- Engine / Motor Power. The Linde X25 offers 6.8 kW more engine / motor power than the Hyster J3.0A.
- Rated Lift Capacity. The Hyster J3.0A offers 500 kg more rated lift capacity than the Linde X25. Hyster J3.0A: 3,000 kg (at 500 mm load centre) · Linde X25: 2,500 kg (at 500 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
- Outside Turning Radius. The Hyster J3.0A offers 250 mm less outside turning radius than the Linde X25.
- Gradeability (laden). The Linde X25 offers 9.5% more gradeability (laden) than the Hyster J3.0A.
- Operating Weight. These differ: Hyster J3.0A 5,509 kg, Linde X25 4,837 kg.
- Free Lift. The Linde X25 offers 50 mm more free lift than the Hyster J3.0A.
On rated lift capacity, Hyster J3.0A leads with the higher figure at 3,000 kg versus 2,500 kg for Linde X25. The measured gap is 500 kg, or 20.0% relative to the latter published value. Hyster J3.0A: 3,000 kg (at 500 mm load centre) · Linde X25: 2,500 kg (at 500 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
Hyster J3.0A leads with the higher figure on maximum lift height: its published 3,228 mm compares with 3,095 mm for Linde X25. That is an absolute difference of 133 mm (4.3% against the latter figure).
The travel speed (laden) figures separate Linde X25 and Hyster J3.0A. Linde X25 leads with the higher figure with 22.0 km/h; Hyster J3.0A records 17.0 km/h, a gap of 5.0 km/h or 29.4% of that second value.
On lift speed (laden), Linde X25 leads with the higher figure at 570 mm/s versus 430 mm/s for Hyster J3.0A. The measured gap is 140 mm/s, or 32.6% relative to the latter published value.
Hyster J3.0A has the higher published figure on operating weight: its published 5,509 kg compares with 4,837 kg for Linde X25. That is an absolute difference of 672 kg (13.9% against the latter figure).
The outside turning radius figures separate Hyster J3.0A and Linde X25. Hyster J3.0A leads with the lower figure with 2,102 mm; Linde X25 records 2,352 mm, a gap of 250 mm or 10.6% of that second value.
Highlighted values lead on that specification. An arrow indicates whether a higher or lower figure is preferred.
| Specification | Hyster J3.0A | Linde X25 |
|---|---|---|
| Capacity & Load | ||
| Rated Lift Capacity | 3,000 kg (6,614 lb) (at 500 mm load centre) | 2,500 kg (5,512 lb) (at 500 mm load centre) |
| Load Centre | 500 mm (19.7 in) | 500 mm (19.7 in) |
| Maximum Lift Height | 3,228 mm (10.6 ft) | 3,095 mm (10.2 ft) |
| Free Lift | 100 mm (3.9 in) | 150 mm (5.9 in) |
| Mast & Forks | ||
| Mast Type | 2-stage limited free lift | Standard mast |
| Mast Height Lowered | 2,240 mm (7.3 ft) | 2,220 mm (7.3 ft) |
| Mast Height Extended | 4,498 mm (14.8 ft) | 3,852 mm (12.6 ft) |
| Mast Tilt Forward | 5deg | 5deg |
| Mast Tilt Backward | 5deg | 8deg |
| Fork Length | 1,000 mm (39.4 in) | 1,000 mm (39.4 in) |
| Fork Width | 120 mm (4.7 in) | 100 mm (3.9 in) |
| Fork Thickness | 50 mm (2.0 in) | 45 mm (1.8 in) |
| Fork Carriage Class | III A | 2A |
| Engine & Powertrain | ||
| Fuel Type | Electric | Electric |
| Power Source | Battery Electric | Battery Electric |
| Engine / Motor Power | 18.0 kW (24.1 hp) | 24.8 kW (33.3 hp) |
| Drive Motor Power | 9.0 kW (12.1 hp) | 12.4 kW (16.6 hp) |
| Lift Motor Power | 20.7 kW (27.8 hp) | 20.0 kW (26.8 hp) |
| Transmission | Induction drive control | Synchronous reluctance motors, stepless digital control |
| Battery & Fuel | ||
| Battery Voltage | 80 V | 90 V |
| Battery Capacity | 700 Ah | 670 Ah |
| Battery Energy | Not specified | 60.3 kWh |
| Battery Type | Lead-acid | Lithium-ion |
| Minimum Battery Weight | 1,770 kg (3,902 lb) | Not specified |
| Dimensions | ||
| Overall Length (with forks) | 3,525 mm (11.6 ft) | 3,671 mm (12.0 ft) |
| Length to Fork Face | 2,525 mm (8.3 ft) | 2,671 mm (8.8 ft) |
| Overall Width | 1,223 mm (48.1 in) | 1,256 mm (49.4 in) |
| Height to Overhead Guard | 2,193 mm (7.2 ft) | 2,225 mm (7.3 ft) |
| Wheelbase | 1,780 mm (70.1 in) | 1,853 mm (73.0 in) |
| Ground Clearance | 137 mm (5.4 in) | 173 mm (6.8 in) |
| Outside Turning Radius | 2,102 mm (6.9 ft) | 2,352 mm (7.7 ft) |
| Right-Angle Stacking Aisle (incl. load) | 3,805 mm (12.5 ft) | 4,008 mm (13.1 ft) |
| Working Aisle (VDI 4.34), 1000x1200 Crossways | 3,805 mm (12.5 ft) | 4,008 mm (13.1 ft) |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise | 3,953 mm (13.0 ft) | 4,208 mm (13.8 ft) |
| Load Distance (x) | 434 mm (17.1 in) | 455 mm (17.9 in) |
| Internal Turning Radius (b13) | 134 mm (5.3 in) | 655 mm (25.8 in) |
| Weights | ||
| Operating Weight | 5,509 kg (12,145 lb) | 4,837 kg (10,664 lb) |
| Front Axle Load (laden) | 7,429 kg (16,378 lb) | 6,315 kg (13,922 lb) |
| Rear Axle Load (laden) | 1,079 kg (2,379 lb) | 1,022 kg (2,253 lb) |
| Performance | ||
| Travel Speed (laden) | 17.0 km/h (10.6 mph) | 22.0 km/h (13.7 mph) |
| Travel Speed (unladen) | 18.0 km/h (11.2 mph) | 22.0 km/h (13.7 mph) |
| Lift Speed (laden) | 430 mm/s (84.6 ft/min) | 570 mm/s (112.2 ft/min) |
| Lift Speed (unladen) | 560 mm/s (110.2 ft/min) | 580 mm/s (114.2 ft/min) |
| Lowering Speed (laden) | 630 mm/s (124.0 ft/min) | 580 mm/s (114.2 ft/min) |
| Gradeability (laden) | 11.0% | 20.5% |
| Drawbar Pull (laden) | 7,100 N (1,596 lbf) | 7,600 N (1,709 lbf) |
| Tyres, Brakes & Chassis | ||
| Tyre Type | Solid Pneumatic | Solid Pneumatic |
| Front Tyre Size | 23 x 10-12 | 250/75-12 (27 x 10-12) |
| Rear Tyre Size | 18 x 7-8 | 6.50-10 |
| Wheels (front / rear) | 2x / 2 | 2x / 2 |
| Service Brake | Hydraulic | Hydraulic / mechanical |
| Operator Position | Seated | Seated |
| General | ||
| Noise Level at Operator Ear | 67 dB(A) | Not specified |
| Warranty | 24 months / 4,000 hours (manufacturer standard) | Not specified |
What the numbers say
This is a cross-brand comparison: Hyster J3.0A (J-A Series), Linde X25 (X Series 1252).
Hyster J3.0A: 3,000 kg (at 500 mm load centre); Linde X25: 2,500 kg (at 500 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
The Hyster J3.0A has the highest published rating at 3,000 kg, 20% more than the Linde X25 at 2,500 kg.
For racking, the Hyster J3.0A reaches 3,228 mm while the Linde X25 tops out at 3,095 mm, a difference of 133 mm.
Per tonne of rated capacity the Hyster J3.0A weighs 1,836 kg and the Linde X25 weighs 1,935 kg.
By rated capacity among the electric forklifts in this database (highest first): Hyster J3.0A 3rd of 19, Linde X25 8th of 19.
Frequently asked questions
How do the published lift capacity ratings of the Hyster J3.0A and Linde X25 compare?
Hyster J3.0A: 3,000 kg (at 500 mm load centre). Linde X25: 2,500 kg (at 500 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
How do the lift heights of the Hyster J3.0A and Linde X25 compare?
Hyster J3.0A: 3,228 mm. Linde X25: 3,095 mm.
How do the turning radii of the Hyster J3.0A and Linde X25 compare?
Hyster J3.0A: 2,102 mm. Linde X25: 2,352 mm.
How do the operating weights of the Hyster J3.0A and Linde X25 compare?
Hyster J3.0A: 5,509 kg. Linde X25: 4,837 kg.
What is the main difference between the Hyster J3.0A and Linde X25?
The Linde X25 offers 6.8 kW more engine / motor power than the Hyster J3.0A. The Hyster J3.0A offers 500 kg more rated lift capacity than the Linde X25. Hyster J3.0A: 3,000 kg (at 500 mm load centre) · Linde X25: 2,500 kg (at 500 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck. The Hyster J3.0A offers 250 mm less outside turning radius than the Linde X25.