Hyster Reach Trucks

Hyster R1.6N

1.6 tonne electric reach truck from the Hyster R series. Figures are for the standard configuration in Hyster's 2021 technical guide: 5000 mm lift on the standard mast, 1150 mm forks and a 48 V battery. Capacity is rated at a 600 mm load centre with the forks retracted.

79% Checked against source

Compare R1.6N Build a comparison

Key specifications

Capacity
1,600 kg (3,527 lb)
Lift Height
5,000 mm (16.4 ft)
Fuel
Electric
Power
Not specified
Width
1,125 mm (44.3 in)
Turning Radius
1,700 mm (66.9 in)
Weight
3,498 kg (7,712 lb)

Hyster R1.6N full specifications

Capacity & Load

Rated Lift Capacity ? 1,600 kg (3,527 lb)
Load Centre ? 600 mm (23.6 in)
Maximum Lift Height ? 5,000 mm (16.4 ft)
Capacity at Maximum Height ? Not specified
Free Lift ? 1,648 mm (64.9 in)

Mast & Forks

Mast Type 3-stage full free lift
Mast Height Lowered ? 2,195 mm (7.2 ft)
Mast Height Extended 5,563 mm (18.3 ft)
Mast Tilt Forward 2deg
Mast Tilt Backward 4deg
Fork Length 1,150 mm (45.3 in)
Fork Width 120 mm (4.7 in)
Fork Thickness 40 mm (1.6 in)
Fork Carriage Class ? II A

Engine & Powertrain

Fuel Type Electric
Power Source Electric (battery)
Engine Manufacturer Not specified
Engine Model Not specified
Engine / Motor Power ? Not specified
Engine Displacement Not specified
Cylinders Not specified
Drive Motor Power 5.4 kW (7.2 hp)
Lift Motor Power 9.9 kW (13.3 hp)
Transmission Not specified

Battery & Fuel

Battery Voltage 48 V
Battery Capacity 700 Ah
Battery Energy ? Not specified
Battery Type Lead-acid
Minimum Battery Weight ? 1,119 kg (2,467 lb)
Fuel Tank Capacity Not specified
LPG Cylinder Size Not specified

Dimensions

Overall Length (with forks) 2,629 mm (8.6 ft)
Length to Fork Face 1,479 mm (58.2 in)
Overall Width ? 1,125 mm (44.3 in)
Overall Height Not specified
Height to Overhead Guard 2,175 mm (7.1 ft)
Wheelbase 1,450 mm (57.1 in)
Ground Clearance 85 mm (3.3 in)
Outside Turning Radius ? 1,700 mm (66.9 in)
Right-Angle Stacking Aisle (incl. load) ? 2,899 mm (9.5 ft)
Right-Angle Stacking Aisle (excl. load) ? Not specified

Weights

Operating Weight ? 3,498 kg (7,712 lb)
Front Axle Load (laden) 1,514 kg (3,338 lb)
Rear Axle Load (laden) 3,584 kg (7,901 lb)

Performance

Travel Speed (laden) 11.0 km/h (6.8 mph)
Travel Speed (unladen) 11.0 km/h (6.8 mph)
Lift Speed (laden) 320 mm/s (63.0 ft/min)
Lift Speed (unladen) 630 mm/s (124.0 ft/min)
Lowering Speed (laden) 550 mm/s (108.3 ft/min)
Gradeability (laden) 7.0%
Drawbar Pull (laden) Not specified

Tyres, Brakes & Chassis

Tyre Type Vulkollan
Front Tyre Size 343 x 140
Rear Tyre Size 285 x 100
Wheels (front / rear) 1x / 2
Service Brake Electric
Steering Not specified
Operator Position Seated

General

Noise Level at Operator Ear 70 dB(A)
Ingress Protection Rating Not specified
Warranty 24 months / 4,000 hours (manufacturer standard)

Not published for this model

We only publish figures we can source. These specifications are not in the documents we hold for this machine:

  • Engine / Motor Power
  • Capacity at Maximum Height
  • Engine Manufacturer
  • Engine Model
  • Engine Displacement
  • Cylinders

Ask the dealer for the full specification sheet if one of these matters to your decision.

Alternatives from other manufacturers

Machines in the same capacity class, from a different brand.

Frequently asked questions

What is the lift capacity of the Hyster R1.6N?

The Hyster R1.6N has a rated lift capacity of 1,600 kg (3,527 lb) at a 600 mm (23.6 in) load centre.

How high does the Hyster R1.6N lift?

The Hyster R1.6N lifts to a maximum fork height of 5,000 mm (16.4 ft) with its standard mast.

What fuel does the Hyster R1.6N use?

The Hyster R1.6N is an electric reach truck. It runs on a 48 V battery system.

How much does the Hyster R1.6N weigh?

The Hyster R1.6N has an operating weight of 3,498 kg (7,712 lb). Check this against your floor loading limits and any trailer or lift you plan to move it on.

What are the dimensions of the Hyster R1.6N?

The Hyster R1.6N measures overall length 2,629 mm (8.6 ft), overall width 1,125 mm (44.3 in), lowered mast height 2,195 mm (7.2 ft).

How much space does the Hyster R1.6N need to turn?

The Hyster R1.6N has an outside turning radius of 1,700 mm (66.9 in) and a right-angle stacking aisle of 2,899 mm (9.5 ft).

Work out what it costs to run

Sources

Where the specifications on this page came from.