Hyster H4.0FT6 vs Linde X25
Key differences
- Engine / Motor Power. The Hyster H4.0FT6 offers 32.2 kW more engine / motor power than the Linde X25.
- Overall Width. The Linde X25 offers 146 mm less overall width than the Hyster H4.0FT6.
- Outside Turning Radius. The Linde X25 offers 247 mm less outside turning radius than the Hyster H4.0FT6.
- Drawbar Pull (laden). The Hyster H4.0FT6 offers 18,333 N more drawbar pull (laden) than the Linde X25.
- Operating Weight. These differ: Hyster H4.0FT6 6,470 kg, Linde X25 4,837 kg.
- Free Lift. The Linde X25 offers 50 mm more free lift than the Hyster H4.0FT6.
Hyster H4.0FT6: 4,000 kg (at 600 mm load centre) ยท Linde X25: 2,500 kg (at 500 mm load centre). Load centres differ or are not specified; these capacity ratings are not directly comparable and do not establish a capacity winner. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
Linde X25 leads with the higher figure on maximum lift height: its published 3,095 mm compares with 3,000 mm for Hyster H4.0FT6. That is an absolute difference of 95 mm (3.2% against the latter figure).
The travel speed (laden) figures separate Linde X25 and Hyster H4.0FT6. Linde X25 leads with the higher figure with 22.0 km/h; Hyster H4.0FT6 records 17.9 km/h, a gap of 4.1 km/h or 22.9% of that second value.
On lift speed (laden), Linde X25 leads with the higher figure at 570 mm/s versus 530 mm/s for Hyster H4.0FT6. The measured gap is 40 mm/s, or 7.5% relative to the latter published value.
Hyster H4.0FT6 has the higher published figure on operating weight: its published 6,470 kg compares with 4,837 kg for Linde X25. That is an absolute difference of 1,633 kg (33.8% against the latter figure).
The outside turning radius figures separate Linde X25 and Hyster H4.0FT6. Linde X25 leads with the lower figure with 2,352 mm; Hyster H4.0FT6 records 2,599 mm, a gap of 247 mm or 9.5% of that second value.
Highlighted values lead on that specification. An arrow indicates whether a higher or lower figure is preferred.
| Specification | Hyster H4.0FT6 | Linde X25 |
|---|---|---|
| Capacity & Load | ||
| Rated Lift Capacity | 4,000 kg (8,818 lb) (at 600 mm load centre) | 2,500 kg (5,512 lb) (at 500 mm load centre) |
| Load Centre | 600 mm (23.6 in) | 500 mm (19.7 in) |
| Maximum Lift Height | 3,000 mm (9.8 ft) | 3,095 mm (10.2 ft) |
| Free Lift | 100 mm (3.9 in) | 150 mm (5.9 in) |
| Mast & Forks | ||
| Mast Type | 2-stage limited free lift | Standard mast |
| Mast Height Lowered | 2,171 mm (7.1 ft) | 2,220 mm (7.3 ft) |
| Mast Height Extended | 3,815 mm (12.5 ft) | 3,852 mm (12.6 ft) |
| Mast Tilt Forward | 6deg | 5deg |
| Mast Tilt Backward | 10deg | 8deg |
| Fork Length | 1,200 mm (47.2 in) | 1,000 mm (39.4 in) |
| Fork Width | 120 mm (4.7 in) | 100 mm (3.9 in) |
| Fork Thickness | 50 mm (2.0 in) | 45 mm (1.8 in) |
| Fork Carriage Class | III A | 2A |
| Engine & Powertrain | ||
| Fuel Type | Diesel | Electric |
| Power Source | Internal Combustion | Battery Electric |
| Engine Manufacturer | Kubota | Not specified |
| Engine Model | V3600 IDI-T (3.6 L) | Not specified |
| Engine / Motor Power | 57.0 kW (76.4 hp) | 24.8 kW (33.3 hp) |
| Engine Displacement | 3,620 cc | Not specified |
| Cylinders | 4 | Not specified |
| Drive Motor Power | Not specified | 12.4 kW (16.6 hp) |
| Lift Motor Power | Not specified | 20.0 kW (26.8 hp) |
| Transmission | Electronic Powershift, 1-speed | Synchronous reluctance motors, stepless digital control |
| Battery & Fuel | ||
| Battery Voltage | Not specified | 90 V |
| Battery Capacity | Not specified | 670 Ah |
| Battery Energy | Not specified | 60.3 kWh |
| Battery Type | Not specified | Lithium-ion |
| Fuel Tank Capacity | 79.0 L (20.9 gal) | Not specified |
| Dimensions | ||
| Overall Length (with forks) | 3,977 mm (13.0 ft) | 3,671 mm (12.0 ft) |
| Length to Fork Face | 2,977 mm (9.8 ft) | 2,671 mm (8.8 ft) |
| Overall Width | 1,402 mm (55.2 in) | 1,256 mm (49.4 in) |
| Height to Overhead Guard | 2,258 mm (7.4 ft) | 2,225 mm (7.3 ft) |
| Wheelbase | 1,830 mm (72.0 in) | 1,853 mm (73.0 in) |
| Ground Clearance | 194 mm (7.6 in) | 173 mm (6.8 in) |
| Outside Turning Radius | 2,599 mm (8.5 ft) | 2,352 mm (7.7 ft) |
| Right-Angle Stacking Aisle (incl. load) | 4,522 mm (14.8 ft) | 4,008 mm (13.1 ft) |
| Working Aisle (VDI 4.34), 1000x1200 Crossways | 4,522 mm (14.8 ft) | 4,008 mm (13.1 ft) |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise | Not specified | 4,208 mm (13.8 ft) |
| Load Distance (x) | 523 mm (20.6 in) | 455 mm (17.9 in) |
| Internal Turning Radius (b13) | 751 mm (29.6 in) | 655 mm (25.8 in) |
| Weights | ||
| Operating Weight | 6,470 kg (14,264 lb) | 4,837 kg (10,664 lb) |
| Front Axle Load (laden) | 9,133 kg (20,135 lb) | 6,315 kg (13,922 lb) |
| Rear Axle Load (laden) | 1,337 kg (2,948 lb) | 1,022 kg (2,253 lb) |
| Performance | ||
| Travel Speed (laden) | 17.9 km/h (11.1 mph) | 22.0 km/h (13.7 mph) |
| Travel Speed (unladen) | 18.8 km/h (11.7 mph) | 22.0 km/h (13.7 mph) |
| Lift Speed (laden) | 530 mm/s (104.3 ft/min) | 570 mm/s (112.2 ft/min) |
| Lift Speed (unladen) | 600 mm/s (118.1 ft/min) | 580 mm/s (114.2 ft/min) |
| Lowering Speed (laden) | 550 mm/s (108.3 ft/min) | 580 mm/s (114.2 ft/min) |
| Gradeability (laden) | 26.6% | 20.5% |
| Drawbar Pull (laden) | 25,933 N (5,830 lbf) | 7,600 N (1,709 lbf) |
| Tyres, Brakes & Chassis | ||
| Tyre Type | Solid Pneumatic | Solid Pneumatic |
| Front Tyre Size | 250 x 15 | 250/75-12 (27 x 10-12) |
| Rear Tyre Size | 7.00 x 12 | 6.50-10 |
| Wheels (front / rear) | 2x / 2 | 2x / 2 |
| Service Brake | Hydraulic, oil-immersed | Hydraulic / mechanical |
| Operator Position | Seated | Seated |
| General | ||
| Noise Level at Operator Ear | 81 dB(A) | Not specified |
What the numbers say
This is a cross-brand comparison: Hyster H4.0FT6 (Fortens FT), Linde X25 (X Series 1252).
Hyster H4.0FT6: 4,000 kg (at 600 mm load centre); Linde X25: 2,500 kg (at 500 mm load centre). Load centres differ or are not specified; these capacity ratings are not directly comparable and do not establish a capacity winner. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
For racking, the Linde X25 reaches 3,095 mm while the Hyster H4.0FT6 tops out at 3,000 mm, a difference of 95 mm.
Frequently asked questions
How do the published lift capacity ratings of the Hyster H4.0FT6 and Linde X25 compare?
Hyster H4.0FT6: 4,000 kg (at 600 mm load centre). Linde X25: 2,500 kg (at 500 mm load centre). Load centres differ or are not specified; these capacity ratings are not directly comparable and do not establish a capacity winner. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
How do the lift heights of the Hyster H4.0FT6 and Linde X25 compare?
Hyster H4.0FT6: 3,000 mm. Linde X25: 3,095 mm.
How do the turning radii of the Hyster H4.0FT6 and Linde X25 compare?
Hyster H4.0FT6: 2,599 mm. Linde X25: 2,352 mm.
How do the operating weights of the Hyster H4.0FT6 and Linde X25 compare?
Hyster H4.0FT6: 6,470 kg. Linde X25: 4,837 kg.
What is the main difference between the Hyster H4.0FT6 and Linde X25?
The Hyster H4.0FT6 offers 32.2 kW more engine / motor power than the Linde X25. The Linde X25 offers 146 mm less overall width than the Hyster H4.0FT6. The Linde X25 offers 247 mm less outside turning radius than the Hyster H4.0FT6.
Do the Hyster H4.0FT6 and Linde X25 use the same fuel type?
No. Hyster H4.0FT6: Diesel. Linde X25: Electric.