Hyster H3.0A vs Linde X30
Key differences
- Engine / Motor Power. The Hyster H3.0A offers 19.2 kW more engine / motor power than the Linde X30.
- Maximum Lift Height. The Hyster H3.0A offers 785 mm more maximum lift height than the Linde X30.
- Overall Width. The Hyster H3.0A offers 70 mm less overall width than the Linde X30.
- Free Lift. The Linde X30 offers 100 mm more free lift than the Hyster H3.0A.
- Drawbar Pull (laden). The Hyster H3.0A offers 11,560 N more drawbar pull (laden) than the Linde X30.
- Operating Weight. These differ: Hyster H3.0A 4,642 kg, Linde X30 5,121 kg.
On maximum lift height, Hyster H3.0A leads with the higher figure at 3,880 mm versus 3,095 mm for Linde X30. The measured gap is 785 mm, or 25.4% relative to the latter published value.
Linde X30 leads with the higher figure on travel speed (laden): its published 22.0 km/h compares with 18.4 km/h for Hyster H3.0A. That is an absolute difference of 3.6 km/h (19.6% against the latter figure).
The lift speed (laden) figures separate Linde X30 and Hyster H3.0A. Linde X30 leads with the higher figure with 570 mm/s; Hyster H3.0A records 560 mm/s, a gap of 10 mm/s or 1.8% of that second value.
On operating weight, Linde X30 has the higher published figure at 5,121 kg versus 4,642 kg for Hyster H3.0A. The measured gap is 479 kg, or 10.3% relative to the latter published value.
Hyster H3.0A leads with the lower figure on outside turning radius: its published 2,374 mm compares with 2,394 mm for Linde X30. That is an absolute difference of 20 mm (0.8% against the latter figure).
The engine / motor power figures separate Hyster H3.0A and Linde X30. Hyster H3.0A leads with the higher figure with 44.0 kW; Linde X30 records 24.8 kW, a gap of 19.2 kW or 77.4% of that second value.
Highlighted values lead on that specification. An arrow indicates whether a higher or lower figure is preferred.
| Specification | Hyster H3.0A | Linde X30 |
|---|---|---|
| Capacity & Load | ||
| Rated Lift Capacity | 3,000 kg (6,614 lb) (at 500 mm load centre) | 3,000 kg (6,614 lb) (at 500 mm load centre) |
| Load Centre | 500 mm (19.7 in) | 500 mm (19.7 in) |
| Maximum Lift Height | 3,880 mm (12.7 ft) | 3,095 mm (10.2 ft) |
| Free Lift | 50 mm (2.0 in) | 150 mm (5.9 in) |
| Mast & Forks | ||
| Mast Type | 2-stage limited free lift | Standard mast |
| Mast Height Lowered | 2,692 mm (8.8 ft) | 2,218 mm (7.3 ft) |
| Mast Height Extended | 4,552 mm (14.9 ft) | 3,850 mm (12.6 ft) |
| Mast Tilt Forward | 6deg | 5deg |
| Mast Tilt Backward | 6deg | 8deg |
| Fork Length | 1,000 mm (39.4 in) | 1,000 mm (39.4 in) |
| Fork Width | 120 mm (4.7 in) | 100 mm (3.9 in) |
| Fork Thickness | 50 mm (2.0 in) | 45 mm (1.8 in) |
| Fork Carriage Class | III A | 3A |
| Engine & Powertrain | ||
| Fuel Type | Diesel | Electric |
| Power Source | Internal Combustion | Battery Electric |
| Engine Manufacturer | Yanmar | Not specified |
| Engine Model | 4TNV86CHT (2.1 L) | Not specified |
| Engine / Motor Power | 44.0 kW (59.0 hp) | 24.8 kW (33.3 hp) |
| Engine Displacement | 2,091 cc | Not specified |
| Cylinders | 4 | Not specified |
| Drive Motor Power | Not specified | 12.4 kW (16.6 hp) |
| Lift Motor Power | Not specified | 20.0 kW (26.8 hp) |
| Transmission | Electronic Powershift, 1-speed | Synchronous reluctance motors, stepless digital control |
| Battery & Fuel | ||
| Battery Voltage | Not specified | 90 V |
| Battery Capacity | Not specified | 670 Ah |
| Battery Energy | Not specified | 60.3 kWh |
| Battery Type | Not specified | Lithium-ion |
| Fuel Tank Capacity | 39.9 L (10.5 gal) | Not specified |
| Dimensions | ||
| Overall Length (with forks) | 3,746 mm (12.3 ft) | 3,704 mm (12.2 ft) |
| Length to Fork Face | 2,731 mm (9.0 ft) | 2,704 mm (8.9 ft) |
| Overall Width | 1,186 mm (46.7 in) | 1,256 mm (49.4 in) |
| Height to Overhead Guard | 2,182 mm (7.2 ft) | 2,225 mm (7.3 ft) |
| Wheelbase | 1,700 mm (66.9 in) | 1,875 mm (73.8 in) |
| Ground Clearance | 182 mm (7.2 in) | 178 mm (7.0 in) |
| Outside Turning Radius | 2,374 mm (7.8 ft) | 2,394 mm (7.9 ft) |
| Right-Angle Stacking Aisle (incl. load) | 4,069 mm (13.3 ft) | 4,043 mm (13.3 ft) |
| Working Aisle (VDI 4.34), 1000x1200 Crossways | 4,069 mm (13.3 ft) | 4,043 mm (13.3 ft) |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise | 4,269 mm (14.0 ft) | 4,243 mm (13.9 ft) |
| Load Distance (x) | 495 mm (19.5 in) | 448 mm (17.6 in) |
| Internal Turning Radius (b13) | 660 mm (26.0 in) | 668 mm (26.3 in) |
| Weights | ||
| Operating Weight | 4,642 kg (10,234 lb) | 5,121 kg (11,290 lb) |
| Front Axle Load (laden) | 6,635 kg (14,628 lb) | 7,104 kg (15,662 lb) |
| Rear Axle Load (laden) | 1,007 kg (2,220 lb) | 1,017 kg (2,242 lb) |
| Performance | ||
| Travel Speed (laden) | 18.4 km/h (11.4 mph) | 22.0 km/h (13.7 mph) |
| Travel Speed (unladen) | 18.6 km/h (11.6 mph) | 22.0 km/h (13.7 mph) |
| Lift Speed (laden) | 560 mm/s (110.2 ft/min) | 570 mm/s (112.2 ft/min) |
| Lift Speed (unladen) | 610 mm/s (120.1 ft/min) | 580 mm/s (114.2 ft/min) |
| Lowering Speed (laden) | 580 mm/s (114.2 ft/min) | 580 mm/s (114.2 ft/min) |
| Gradeability (laden) | 26.0% | 18.3% |
| Drawbar Pull (laden) | 19,160 N (4,307 lbf) | 7,600 N (1,709 lbf) |
| Tyres, Brakes & Chassis | ||
| Tyre Type | Solid Pneumatic | Solid Pneumatic |
| Front Tyre Size | 28 x 9-15 | 250/75-12 (27 x 10-12) |
| Rear Tyre Size | 6.5 x 10 | 225/75-10 (23 x 9-10) |
| Wheels (front / rear) | 2x / 2 | 2x / 2 |
| Service Brake | Hydraulic, drum | Hydraulic / mechanical |
| Operator Position | Seated | Seated |
| General | ||
| Noise Level at Operator Ear | 79 dB(A) | Not specified |
| Warranty | 24 months / 4,000 hours (manufacturer standard) | Not specified |
What the numbers say
This is a cross-brand comparison: Hyster H3.0A (A Series), Linde X30 (X Series 1252).
Hyster H3.0A: 3,000 kg (at 500 mm load centre); Linde X30: 3,000 kg (at 500 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
The Hyster H3.0A and Linde X30 are rated at 3,000 kg, so capacity does not separate them.
For racking, the Hyster H3.0A reaches 3,880 mm while the Linde X30 tops out at 3,095 mm, a difference of 785 mm.
Per tonne of rated capacity the Hyster H3.0A weighs 1,547 kg and the Linde X30 weighs 1,707 kg.
Frequently asked questions
How do the lift heights of the Hyster H3.0A and Linde X30 compare?
Hyster H3.0A: 3,880 mm. Linde X30: 3,095 mm.
How do the turning radii of the Hyster H3.0A and Linde X30 compare?
Hyster H3.0A: 2,374 mm. Linde X30: 2,394 mm.
How do the operating weights of the Hyster H3.0A and Linde X30 compare?
Hyster H3.0A: 4,642 kg. Linde X30: 5,121 kg.
What is the main difference between the Hyster H3.0A and Linde X30?
The Hyster H3.0A offers 19.2 kW more engine / motor power than the Linde X30. The Hyster H3.0A offers 785 mm more maximum lift height than the Linde X30. The Hyster H3.0A offers 70 mm less overall width than the Linde X30.
Do the Hyster H3.0A and Linde X30 use the same fuel type?
No. Hyster H3.0A: Diesel. Linde X30: Electric.