Hyster J3.5A vs Linde X25
Comparing 2 electric forklifts on published specifications. 34 specifications are published for every model here.
Key differences
- Rated Lift Capacity. Hyster J3.5A offers 1,000 kg more rated lift capacity than the next model in this comparison.
- Engine / Motor Power. Linde X25 offers 6.8 kW more engine / motor power than the next model in this comparison.
- Outside Turning Radius. Hyster J3.5A offers 183 mm less outside turning radius than the next model in this comparison.
- Gradeability (laden). Linde X25 offers 10.5% more gradeability (laden) than the next model in this comparison.
- Operating Weight. These differ: Hyster J3.5A 5,746 kg, Linde X25 4,837 kg. Neither figure is better in itself - it depends on the application.
- Lift Speed (laden). Linde X25 offers 210 mm/s more lift speed (laden) than the next model in this comparison.
| Specification | Hyster J3.5A | Linde X25 |
|---|---|---|
| Capacity & Load | ||
| Rated Lift Capacity ↑ | 3,500 kg (7,716 lb) (leads on this specification) | 2,500 kg (5,512 lb) |
| Load Centre | 500 mm (19.7 in) | 500 mm (19.7 in) |
| Maximum Lift Height ↑ | 3,228 mm (10.6 ft) | 3,095 mm (10.2 ft) |
| Free Lift ↑ | 100 mm (3.9 in) | 150 mm (5.9 in) (leads on this specification) |
| Mast & Forks | ||
| Mast Type | 2-stage limited free lift | Standard mast |
| Mast Height Lowered ↓ | 2,240 mm (7.3 ft) | 2,220 mm (7.3 ft) |
| Mast Height Extended | 4,498 mm (14.8 ft) | 3,852 mm (12.6 ft) |
| Mast Tilt Forward | 5deg | 5deg |
| Mast Tilt Backward | 5deg | 8deg |
| Fork Length | 1,000 mm (39.4 in) | 1,000 mm (39.4 in) |
| Fork Width | 120 mm (4.7 in) | 100 mm (3.9 in) |
| Fork Thickness | 50 mm (2.0 in) | 45 mm (1.8 in) |
| Fork Carriage Class | III A | 2A |
| Engine & Powertrain | ||
| Fuel Type | Electric | Electric |
| Power Source | Battery Electric | Battery Electric |
| Engine / Motor Power ↑ | 18.0 kW (24.1 hp) | 24.8 kW (33.3 hp) (leads on this specification) |
| Drive Motor Power ↑ | 9.0 kW (12.1 hp) | 12.4 kW (16.6 hp) (leads on this specification) |
| Lift Motor Power ↑ | 20.7 kW (27.8 hp) | 20.0 kW (26.8 hp) |
| Transmission | Induction drive control | Synchronous reluctance motors, stepless digital control |
| Battery & Fuel | ||
| Battery Voltage | 80 V | 90 V |
| Battery Capacity ↑ | 700 Ah | 670 Ah |
| Battery Energy ↑ | Not specified | 60.3 kWh |
| Battery Type | Lead-acid | Lithium-ion |
| Minimum Battery Weight | 1,770 kg (3,902 lb) | Not specified |
| Dimensions | ||
| Overall Length (with forks) ↓ | 3,591 mm (11.8 ft) | 3,671 mm (12.0 ft) |
| Length to Fork Face ↓ | 2,591 mm (8.5 ft) | 2,671 mm (8.8 ft) |
| Overall Width ↓ | 1,223 mm (48.1 in) | 1,256 mm (49.4 in) |
| Height to Overhead Guard ↓ | 2,193 mm (7.2 ft) | 2,225 mm (7.3 ft) |
| Wheelbase | 1,780 mm (70.1 in) | 1,853 mm (73.0 in) |
| Ground Clearance ↑ | 137 mm (5.4 in) | 173 mm (6.8 in) (leads on this specification) |
| Outside Turning Radius ↓ | 2,169 mm (7.1 ft) (leads on this specification) | 2,352 mm (7.7 ft) |
| Right-Angle Stacking Aisle (incl. load) ↓ | 3,871 mm (12.7 ft) | 4,008 mm (13.1 ft) |
| Weights | ||
| Operating Weight | 5,746 kg (12,668 lb) | 4,837 kg (10,664 lb) |
| Front Axle Load (laden) | 8,117 kg (17,895 lb) | 6,315 kg (13,922 lb) |
| Rear Axle Load (laden) | 1,130 kg (2,491 lb) | 1,022 kg (2,253 lb) |
| Performance | ||
| Travel Speed (laden) ↑ | 16.0 km/h (9.9 mph) | 22.0 km/h (13.7 mph) (leads on this specification) |
| Travel Speed (unladen) ↑ | 18.0 km/h (11.2 mph) | 22.0 km/h (13.7 mph) (leads on this specification) |
| Lift Speed (laden) ↑ | 360 mm/s (70.9 ft/min) | 570 mm/s (112.2 ft/min) (leads on this specification) |
| Lift Speed (unladen) ↑ | 560 mm/s (110.2 ft/min) | 580 mm/s (114.2 ft/min) |
| Lowering Speed (laden) | 640 mm/s (126.0 ft/min) | 580 mm/s (114.2 ft/min) |
| Gradeability (laden) ↑ | 10.0% | 20.5% (leads on this specification) |
| Drawbar Pull (laden) ↑ | 6,800 N (1,529 lbf) | 7,600 N (1,709 lbf) (leads on this specification) |
| Tyres, Brakes & Chassis | ||
| Tyre Type | Solid Pneumatic | Solid Pneumatic |
| Front Tyre Size | 23 x 10-12 | 250/75-12 (27 x 10-12) |
| Rear Tyre Size | 18 x 7-8 | 6.50-10 |
| Wheels (front / rear) | 2x / 2 | 2x / 2 |
| Service Brake | Hydraulic | Hydraulic / mechanical |
| Operator Position | Seated | Seated |
| General | ||
| Noise Level at Operator Ear ↓ | 67 dB(A) | Not specified |
| Warranty | 24 months / 4,000 hours (manufacturer standard) | Not specified |
How to read this comparison
- A highlighted value means that model leads on that specification, and only where a higher or lower figure is objectively better. Capacity and lift height are marked; wheelbase and tyre size are not, because neither direction is universally better.
- A value is only marked when every model in the comparison published that figure. We never mark a leader against missing data.
- We do not name an overall winner. Which machine is right depends on your aisles, your shift pattern and your energy prices, which no specification table knows.
- Capacity figures are only comparable at the same load centre. Check the load centre row before comparing capacities directly.
Frequently asked questions
Which has the higher lift capacity, the Hyster J3.5A and Linde X25?
Hyster J3.5A: 3,500 kg. Linde X25: 2,500 kg.
What is the main difference between the Hyster J3.5A and Linde X25?
Hyster J3.5A offers 1,000 kg more rated lift capacity than the next model in this comparison. Linde X25 offers 6.8 kW more engine / motor power than the next model in this comparison. Hyster J3.5A offers 183 mm less outside turning radius than the next model in this comparison.
People also compare
Other machines in this class
Compare something else
Build your own comparison with up to four models.
Start a new comparison