Hyster P2.2 vs Toyota 40-8FGU25
Key differences
- Maximum Lift Height. The Toyota 40-8FGU25 offers 3,210 mm more maximum lift height than the Hyster P2.2.
- Overall Width. The Hyster P2.2 offers 438 mm less overall width than the Toyota 40-8FGU25.
- Outside Turning Radius. The Hyster P2.2 offers 613 mm less outside turning radius than the Toyota 40-8FGU25.
- Operating Weight. These differ: Hyster P2.2 632 kg, Toyota 40-8FGU25 3,640 kg.
- Lift Speed (laden). The Toyota 40-8FGU25 offers 560 mm/s more lift speed (laden) than the Hyster P2.2.
- Lift Speed (unladen). The Toyota 40-8FGU25 offers 580 mm/s more lift speed (unladen) than the Hyster P2.2.
On rated lift capacity, Toyota 40-8FGU25 leads with the higher figure at 2,250 kg versus 2,200 kg for Hyster P2.2. The measured gap is 50 kg, or 2.3% relative to the latter published value. Hyster P2.2: 2,200 kg (at 600 mm load centre) ยท Toyota 40-8FGU25: 2,250 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
Toyota 40-8FGU25 leads with the higher figure on maximum lift height: its published 3,340 mm compares with 130 mm for Hyster P2.2. That is an absolute difference of 3,210 mm (2,469.2% against the latter figure).
The travel speed (laden) figures separate Toyota 40-8FGU25 and Hyster P2.2. Toyota 40-8FGU25 leads with the higher figure with 17.5 km/h; Hyster P2.2 records 6.0 km/h, a gap of 11.5 km/h or 191.7% of that second value.
On lift speed (laden), Toyota 40-8FGU25 leads with the higher figure at 600 mm/s versus 40 mm/s for Hyster P2.2. The measured gap is 560 mm/s, or 1,400.0% relative to the latter published value.
Toyota 40-8FGU25 has the higher published figure on operating weight: its published 3,640 kg compares with 632 kg for Hyster P2.2. That is an absolute difference of 3,008 kg (475.9% against the latter figure).
The outside turning radius figures separate Hyster P2.2 and Toyota 40-8FGU25. Hyster P2.2 leads with the lower figure with 1,607 mm; Toyota 40-8FGU25 records 2,220 mm, a gap of 613 mm or 27.6% of that second value.
Highlighted values lead on that specification. An arrow indicates whether a higher or lower figure is preferred.
| Specification | Hyster P2.2 | Toyota 40-8FGU25 |
|---|---|---|
| Capacity & Load | ||
| Rated Lift Capacity | 2,200 kg (4,850 lb) (at 600 mm load centre) | 2,250 kg (4,960 lb) (at 600 mm load centre) |
| Load Centre | 600 mm (23.6 in) | 600 mm (23.6 in) |
| Maximum Lift Height | 130 mm (5.1 in) | 3,340 mm (11.0 ft) |
| Free Lift | Not specified | 155 mm (6.1 in) |
| Mast & Forks | ||
| Mast Type | Not specified | Wide-view 2-stage (V) |
| Mast Height Lowered | Not specified | 2,145 mm (7.0 ft) |
| Mast Height Extended | Not specified | 4,560 mm (15.0 ft) |
| Mast Tilt Forward | Not specified | 6deg |
| Mast Tilt Backward | Not specified | 11deg |
| Fork Length | 1,156 mm (45.5 in) | 1,070 mm (42.1 in) |
| Fork Width | 172 mm (6.8 in) | 125 mm (4.9 in) |
| Fork Thickness | 64 mm (2.5 in) | 40 mm (1.6 in) |
| Engine & Powertrain | ||
| Fuel Type | Electric | Dual Fuel LPG/Petrol |
| Power Source | Electric (battery) | Internal Combustion |
| Engine Manufacturer | Not specified | Kubota |
| Engine Model | Not specified | WG2503 (2.5 L) |
| Engine / Motor Power | Not specified | 44.0 kW (59.0 hp) |
| Engine Displacement | Not specified | 2,491 cc |
| Cylinders | Not specified | 4 |
| Drive Motor Power | 1.3 kW (1.7 hp) | Not specified |
| Lift Motor Power | 1.2 kW (1.6 hp) | Not specified |
| Transmission | Not specified | Powershift, 1 forward / 1 reverse |
| Battery & Fuel | ||
| Battery Voltage | 24 V | Not specified |
| Battery Capacity | 375 Ah | Not specified |
| Battery Type | Lead-acid | Not specified |
| Minimum Battery Weight | 288 kg (635 lb) | Not specified |
| Fuel Tank Capacity | Not specified | 60.0 L (15.9 gal) |
| Dimensions | ||
| Overall Length (with forks) | 1,806 mm (71.1 in) | Not specified |
| Length to Fork Face | 650 mm (25.6 in) | 2,640 mm (8.7 ft) |
| Overall Width | 712 mm (28.0 in) | 1,150 mm (45.3 in) |
| Height to Overhead Guard | Not specified | 2,110 mm (6.9 ft) |
| Wheelbase | 1,440 mm (56.7 in) | 1,650 mm (65.0 in) |
| Ground Clearance | 21 mm (0.8 in) | 140 mm (5.5 in) |
| Outside Turning Radius | 1,607 mm (63.3 in) | 2,220 mm (7.3 ft) |
| Right-Angle Stacking Aisle (incl. load) | 2,409 mm (7.9 ft) | Not specified |
| Right-Angle Stacking Aisle (excl. load) | Not specified | 2,690 mm (8.8 ft) |
| Working Aisle (VDI 4.34), 1000x1200 Crossways | 2,409 mm (7.9 ft) | Not specified |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise | 2,276 mm (7.5 ft) | Not specified |
| Load Distance (x) | 955 mm (37.6 in) | 470 mm (18.5 in) |
| Weights | ||
| Operating Weight | 632 kg (1,393 lb) | 3,640 kg (8,025 lb) |
| Front Axle Load (laden) | 1,032 kg (2,275 lb) | 5,360 kg (11,817 lb) |
| Rear Axle Load (laden) | 1,800 kg (3,968 lb) | 770 kg (1,698 lb) |
| Performance | ||
| Travel Speed (laden) | 6.0 km/h (3.7 mph) | 17.5 km/h (10.9 mph) |
| Travel Speed (unladen) | 6.0 km/h (3.7 mph) | 18.0 km/h (11.2 mph) |
| Lift Speed (laden) | 40 mm/s (7.9 ft/min) | 600 mm/s (118.1 ft/min) |
| Lift Speed (unladen) | 50 mm/s (9.8 ft/min) | 630 mm/s (124.0 ft/min) |
| Lowering Speed (laden) | 90 mm/s (17.7 ft/min) | 500 mm/s (98.4 ft/min) |
| Gradeability (laden) | 4.0% | 26.0% |
| Tyres, Brakes & Chassis | ||
| Tyre Type | Polyurethane | Pneumatic |
| Front Tyre Size | 250 x 75 | 7.00-12-12PR |
| Rear Tyre Size | 85 x 110 | 6.00-9-10PR |
| Wheels (front / rear) | 1x+2 / 2 | 2x / 2 |
| Service Brake | Electromagnetic | Hydraulic |
| Operator Position | Pedestrian | Seated |
| General | ||
| Warranty | 24 months / 4,000 hours (manufacturer standard) | Not specified |
What the numbers say
This is a cross-brand comparison: Hyster P2.2 (P Series (A418)), Toyota 40-8FGU25 (Core IC Pneumatic 8FGU).
Hyster P2.2: 2,200 kg (at 600 mm load centre); Toyota 40-8FGU25: 2,250 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
The Toyota 40-8FGU25 has the highest published rating at 2,250 kg, 2% more than the Hyster P2.2 at 2,200 kg.
For racking, the Toyota 40-8FGU25 reaches 3,340 mm while the Hyster P2.2 tops out at 130 mm, a difference of 3,210 mm.
Per tonne of rated capacity the Hyster P2.2 weighs 287 kg and the Toyota 40-8FGU25 weighs 1,618 kg.
Frequently asked questions
How do the published lift capacity ratings of the Hyster P2.2 and Toyota 40-8FGU25 compare?
Hyster P2.2: 2,200 kg (at 600 mm load centre). Toyota 40-8FGU25: 2,250 kg (at 600 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
How do the lift heights of the Hyster P2.2 and Toyota 40-8FGU25 compare?
Hyster P2.2: 130 mm. Toyota 40-8FGU25: 3,340 mm.
How do the turning radii of the Hyster P2.2 and Toyota 40-8FGU25 compare?
Hyster P2.2: 1,607 mm. Toyota 40-8FGU25: 2,220 mm.
How do the operating weights of the Hyster P2.2 and Toyota 40-8FGU25 compare?
Hyster P2.2: 632 kg. Toyota 40-8FGU25: 3,640 kg.
What is the main difference between the Hyster P2.2 and Toyota 40-8FGU25?
The Toyota 40-8FGU25 offers 3,210 mm more maximum lift height than the Hyster P2.2. The Hyster P2.2 offers 438 mm less overall width than the Toyota 40-8FGU25. The Hyster P2.2 offers 613 mm less outside turning radius than the Toyota 40-8FGU25.
Do the Hyster P2.2 and Toyota 40-8FGU25 use the same fuel type?
No. Hyster P2.2: Electric. Toyota 40-8FGU25: Dual Fuel LPG/Petrol.