Hyster J2.5A vs Linde X30
Key differences
- Engine / Motor Power. The Linde X30 offers 6.8 kW more engine / motor power than the Hyster J2.5A.
- Rated Lift Capacity. The Linde X30 offers 500 kg more rated lift capacity than the Hyster J2.5A. Hyster J2.5A: 2,500 kg (at 500 mm load centre) · Linde X30: 3,000 kg (at 500 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
- Maximum Lift Height. The Hyster J2.5A offers 276 mm more maximum lift height than the Linde X30.
- Overall Width. The Hyster J2.5A offers 71 mm less overall width than the Linde X30.
- Free Lift. The Linde X30 offers 50 mm more free lift than the Hyster J2.5A.
- Operating Weight. These differ: Hyster J2.5A 4,642 kg, Linde X30 5,121 kg.
On rated lift capacity, Linde X30 leads with the higher figure at 3,000 kg versus 2,500 kg for Hyster J2.5A. The measured gap is 500 kg, or 20.0% relative to the latter published value. Hyster J2.5A: 2,500 kg (at 500 mm load centre) · Linde X30: 3,000 kg (at 500 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
Hyster J2.5A leads with the higher figure on maximum lift height: its published 3,371 mm compares with 3,095 mm for Linde X30. That is an absolute difference of 276 mm (8.9% against the latter figure).
The travel speed (laden) figures separate Linde X30 and Hyster J2.5A. Linde X30 leads with the higher figure with 22.0 km/h; Hyster J2.5A records 18.0 km/h, a gap of 4.0 km/h or 22.2% of that second value.
On lift speed (laden), Linde X30 leads with the higher figure at 570 mm/s versus 530 mm/s for Hyster J2.5A. The measured gap is 40 mm/s, or 7.5% relative to the latter published value.
Linde X30 has the higher published figure on operating weight: its published 5,121 kg compares with 4,642 kg for Hyster J2.5A. That is an absolute difference of 479 kg (10.3% against the latter figure).
The battery capacity figures separate Linde X30 and Hyster J2.5A. Linde X30 leads with the higher figure with 670 Ah; Hyster J2.5A records 560 Ah, a gap of 110 Ah or 19.6% of that second value.
Highlighted values lead on that specification. An arrow indicates whether a higher or lower figure is preferred.
| Specification | Hyster J2.5A | Linde X30 |
|---|---|---|
| Capacity & Load | ||
| Rated Lift Capacity | 2,500 kg (5,512 lb) (at 500 mm load centre) | 3,000 kg (6,614 lb) (at 500 mm load centre) |
| Load Centre | 500 mm (19.7 in) | 500 mm (19.7 in) |
| Maximum Lift Height | 3,371 mm (11.1 ft) | 3,095 mm (10.2 ft) |
| Free Lift | 100 mm (3.9 in) | 150 mm (5.9 in) |
| Mast & Forks | ||
| Mast Type | 2-stage limited free lift | Standard mast |
| Mast Height Lowered | 2,140 mm (7.0 ft) | 2,218 mm (7.3 ft) |
| Mast Height Extended | 4,480 mm (14.7 ft) | 3,850 mm (12.6 ft) |
| Mast Tilt Forward | 5deg | 5deg |
| Mast Tilt Backward | 5deg | 8deg |
| Fork Length | 1,000 mm (39.4 in) | 1,000 mm (39.4 in) |
| Fork Width | 100 mm (3.9 in) | 100 mm (3.9 in) |
| Fork Thickness | 40 mm (1.6 in) | 45 mm (1.8 in) |
| Fork Carriage Class | II A | 3A |
| Engine & Powertrain | ||
| Fuel Type | Electric | Electric |
| Power Source | Battery Electric | Battery Electric |
| Engine / Motor Power | 18.0 kW (24.1 hp) | 24.8 kW (33.3 hp) |
| Drive Motor Power | 9.0 kW (12.1 hp) | 12.4 kW (16.6 hp) |
| Lift Motor Power | 20.7 kW (27.8 hp) | 20.0 kW (26.8 hp) |
| Transmission | Induction drive control | Synchronous reluctance motors, stepless digital control |
| Battery & Fuel | ||
| Battery Voltage | 80 V | 90 V |
| Battery Capacity | 560 Ah | 670 Ah |
| Battery Energy | Not specified | 60.3 kWh |
| Battery Type | Lead-acid | Lithium-ion |
| Minimum Battery Weight | 1,480 kg (3,263 lb) | Not specified |
| Dimensions | ||
| Overall Length (with forks) | Not specified | 3,704 mm (12.2 ft) |
| Length to Fork Face | Not specified | 2,704 mm (8.9 ft) |
| Overall Width | 1,185 mm (46.7 in) | 1,256 mm (49.4 in) |
| Height to Overhead Guard | 2,193 mm (7.2 ft) | 2,225 mm (7.3 ft) |
| Wheelbase | 1,636 mm (64.4 in) | 1,875 mm (73.8 in) |
| Ground Clearance | 137 mm (5.4 in) | 178 mm (7.0 in) |
| Outside Turning Radius | Not specified | 2,394 mm (7.9 ft) |
| Right-Angle Stacking Aisle (incl. load) | Not specified | 4,043 mm (13.3 ft) |
| Working Aisle (VDI 4.34), 1000x1200 Crossways | Not specified | 4,043 mm (13.3 ft) |
| Working Aisle (VDI 4.34), 800x1200 Lengthwise | Not specified | 4,243 mm (13.9 ft) |
| Load Distance (x) | Not specified | 448 mm (17.6 in) |
| Internal Turning Radius (b13) | Not specified | 668 mm (26.3 in) |
| Weights | ||
| Operating Weight | 4,642 kg (10,234 lb) | 5,121 kg (11,290 lb) |
| Front Axle Load (laden) | 6,252 kg (13,783 lb) | 7,104 kg (15,662 lb) |
| Rear Axle Load (laden) | 889 kg (1,960 lb) | 1,017 kg (2,242 lb) |
| Performance | ||
| Travel Speed (laden) | 18.0 km/h (11.2 mph) | 22.0 km/h (13.7 mph) |
| Travel Speed (unladen) | 18.0 km/h (11.2 mph) | 22.0 km/h (13.7 mph) |
| Lift Speed (laden) | 530 mm/s (104.3 ft/min) | 570 mm/s (112.2 ft/min) |
| Lift Speed (unladen) | 630 mm/s (124.0 ft/min) | 580 mm/s (114.2 ft/min) |
| Lowering Speed (laden) | 690 mm/s (135.8 ft/min) | 580 mm/s (114.2 ft/min) |
| Gradeability (laden) | 13.0% | 18.3% |
| Drawbar Pull (laden) | 5,590 N (1,257 lbf) | 7,600 N (1,709 lbf) |
| Tyres, Brakes & Chassis | ||
| Tyre Type | Solid Pneumatic | Solid Pneumatic |
| Front Tyre Size | 23 x 9-10 | 250/75-12 (27 x 10-12) |
| Rear Tyre Size | 18 x 7-8 | 225/75-10 (23 x 9-10) |
| Wheels (front / rear) | 2x / 2 | 2x / 2 |
| Service Brake | Hydraulic | Hydraulic / mechanical |
| Operator Position | Seated | Seated |
| General | ||
| Noise Level at Operator Ear | 67 dB(A) | Not specified |
| Warranty | 24 months / 4,000 hours (manufacturer standard) | Not specified |
What the numbers say
This is a cross-brand comparison: Hyster J2.5A (J-A Series), Linde X30 (X Series 1252).
Hyster J2.5A: 2,500 kg (at 500 mm load centre); Linde X30: 3,000 kg (at 500 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
The Linde X30 has the highest published rating at 3,000 kg, 20% more than the Hyster J2.5A at 2,500 kg.
For racking, the Hyster J2.5A reaches 3,371 mm while the Linde X30 tops out at 3,095 mm, a difference of 276 mm.
Per tonne of rated capacity the Linde X30 weighs 1,707 kg and the Hyster J2.5A weighs 1,857 kg.
By rated capacity among the electric forklifts in this database (highest first): Hyster J2.5A 8th of 19, Linde X30 3rd of 19.
Frequently asked questions
How do the published lift capacity ratings of the Hyster J2.5A and Linde X30 compare?
Hyster J2.5A: 2,500 kg (at 500 mm load centre). Linde X30: 3,000 kg (at 500 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck.
How do the lift heights of the Hyster J2.5A and Linde X30 compare?
Hyster J2.5A: 3,371 mm. Linde X30: 3,095 mm.
How do the operating weights of the Hyster J2.5A and Linde X30 compare?
Hyster J2.5A: 4,642 kg. Linde X30: 5,121 kg.
What is the main difference between the Hyster J2.5A and Linde X30?
The Linde X30 offers 6.8 kW more engine / motor power than the Hyster J2.5A. The Linde X30 offers 500 kg more rated lift capacity than the Hyster J2.5A. Hyster J2.5A: 2,500 kg (at 500 mm load centre) · Linde X30: 3,000 kg (at 500 mm load centre). These are published ratings at the same load centre. Check the manufacturer's load chart for the exact mast, lift height and attachment configuration before selecting a truck. The Hyster J2.5A offers 276 mm more maximum lift height than the Linde X30.